Reduced Soil Macropores and Forest Cover Reduce Warm‐Season Baseflow below Ecological Thresholds in the Upper Delaware River Basin

We examined the impacts of changes in land cover and soil conditions on the flow regime of the upper Delaware River Basin using the Water Availability Tool for Environmental Resources. We simulated flows for two periods, c. 1600 and 1940, at three sites using the same temperature and precipitation conditions: the East Branch, West Branch, and mainstem Delaware River at Callicoon, New York. The 1600 period represented pristine forest and soils. The 1940 period included reduced forest cover, increased agriculture, and degraded soils with reduced soil macropore fractions. A model‐sensitivity test examined the impact of soil macropore and land cover change separately. We assessed changes in flow regimes between the 1600 and 1940 periods using a variety of flow statistics, including established ecological limits of hydrologic alteration (ELOHA) thresholds. Reduced forest soil macropore fraction significantly reduced summer and fall baseflows. The 1940 period had significantly lower Q50 flows (50% exceedance) than the 1600 period, as well as summer and fall Q90 and Q75–Q90 flows below the ELOHA thresholds. The one‐ to seven‐day minimum flows were also lower for the 1940 period, by 17% on the mainstem. 1940 flows were 6% more likely than the 1600 period to fall below the low‐flow threshold for federally endangered dwarf wedgemussel (Alasmidonta heterodon) habitat. In contrast, the 1940 period had higher flows than the 1600 period from late fall to early winter.     

Combined steam-dry reforming of toluene in syngas over CaNiRu/Al2O3 catalysts

Cracking, steam reforming, dry reforming, and combined steam and dry reforming of toluene in model syngas were performed using catalysts to simulate tar removal produced during biomass gasification. The catalysts were prepared by adding Ru, Ca, and Mn to Ni-based catalysts, and their properties were measured using BET, pulse CO chemisorption, XRD and TG. In steam and dry reforming of toluene, a high toluene conversion was observed with increasing Ca content in the catalyst and catalysts containing Ca showed a higher activity than those containing Mn. In combined steam-dry reforming with syngas, 1%CaNiRu/Al₂O₃ indicated a conversion of 93.9% at 800°C.     

Ex-situ field application of electrokinetics for remediation of shooting-range soil

Electrokinetic process for remediation of a shooting-range site was evaluated in this study. By field operation for 100 days, the newly designed electrokinetic system was evaluated for process stability, performance, and efficiency. The field site of this study was an abandoned military shooting range located in the Civilian Control Line of South Korea. The target area, only, was heavily contaminated by Pb and Cu to a depth of 0.5 m. After dry-sieving of the field soil to separate particulate Pb, two cells in a hexagonal (two-dimensional) arrangement, including ten anodes outside the cell and two cathodes in the middle, were prepared. The pH of each electrolyte was adjusted by use of concentrated HNO₃, resulting in acid-enhanced electrokinetics. The monitoring results indicated that overall removal of heavy metals (Pb, Cu) was achieved, and that both heavy metals were removed from outside the cell. The average final efficiency of removal of Pb and Cu was 39.5 ± 35 and 63.8 ± 12%, respectively. Although the feasibility of this system was confirmed, for commercialization of the process confirmed drawbacks must be improved by further study.

     

Fine Dust Filtration Using a Metal Fiber Bed

Abstract

A bed-type filter composed of thin metal alloy fiber was closely examined with dust capturing in cold and hot runs. The investigation of an individual mechanism across the filter bed indicated that the aerated dust could be initially collected by depth filtration, and after a while, surface filtration dominated the overall dust collection. The present metal fiber bed was comparable to the conventional ceramic filters because of its good collection efficiency with low pressure drop. It also showed potential to be used as a prefilter in a diesel exhaust trapping system.     

Estimating bulk optical properties of aerosols over the western North Pacific by using MODIS and CERES measurements

Over the western North Pacific, a large amount of land aerosols from Asian-Pacific countries is transported by the prevailing westerlies. This transport makes the radiative characteristics of these aerosols diverse, particularly when one compares those characteristics over the coastal sea with those over the open sea. In this paper we discuss a method that uses satellite data to obtain the single-scattering albedo (ω) and asymmetry factor (g) of atmospheric aerosols for two large-scale subdivisions—the coastal sea (within 250 km from the coast) and the open sea (the remaining area)—over the western North Pacific (110°E–180°, 20°N–50°N). Our estimation method uses satellite measurements, obtained over a six-year period (2000–2005), of aerosol optical depth (AOD) and shortwave fluxes at both the surface and the top of the atmosphere (TOA); the measurements are obtained using the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Clouds and the Earth's Radiant Energy System (CERES). For the two subdivisions, the estimated annual means of (ω,g) at 630 nm are significantly different: (0.94, 0.65) over the coastal sea and (0.97, 0.70) over the open sea. From a quantitative viewpoint, this result indicates that in comparison with aerosols over the open sea, those over the coastal sea show greater absorption and lesser forward scattering of solar radiation. The estimated optical properties are responsible for the aerosol surface cooling observed by MODIS and CERES, which is approximately 138 and 108 W m⁻² per AOD over the coastal sea and open sea, respectively.     

Characteristics of products and PCDD/DF emissions from a pyrolysis process of urethane/styrofoam waste from electrical home appliances

A plastic fraction consisting mainly of polyurethane/styrofoam waste is generated after separating valuable spare parts and metals from used electrical home appliances. In Korea, such waste is currently incinerated in cement kilns or is landfilled. However, owing to its high volatile matter content, conversion into gaseous or liquid pyrolysis products is a preferable alternative. A pyrolysis process of polyurethane and styrofoam waste from electrical home appliances was evaluated by characterizing the products generated at 500°–800°C. The para meters determined were the yields of gas, oil, and char; the characteristics of the remaining char; and the con centration of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzo-furans in the product gas. As expected, the char yield decreased at higher temperatures, whereas gas and oil yields showed increasing tendency. The oil products could be used as storable fuels with a calorific value of 6000–8000 kcal/kg. Fine pores were observed in the char. The adsorption and decolorizing ability of the char were almost the same as those of activated carbon, so that pyrolysis char has potential for use as a sorbent. Further feasibility studies will be needed before utilizing pyrolysis technology to recover either fuels or usable products from polyurethane/styrofoam waste.     

Influence of ship emissions on ozone concentrations around coastal areas during summer season

The influence of ship emissions on ozone (O₃) concentrations in a coastal area (CA) including Busan port, Korea was examined based on a numerical modeling approach during a high O₃ episode. The analysis was performed by two sets of simulation scenarios: (1) with ship emissions (e.g., TOTAL case) and (2) without ship emissions (e.g., BASE case). A process analysis (PA) (the integrated processes rate (IPR) and integrated reaction rate (IRR) analyses) was used to evaluate the relative contributions of individual physical and chemical processes in O₃ production in and around the CA (e.g., sites of Dong Sam (DS) and Dae Yeon (DY)). The model study suggested the possibility that pollutant gases emitted from the ships traversing Busan port can exert a direct impact on the O₃ concentration levels in the CA. Largest impacts of ship emissions on the O₃ concentrations were predicted at the coast (up to 15 ppb) and at inland locations (about 5 ppb) due to both the photochemical production of pollutant gases emitted from the ships and meteorological conditions. From the PA, the photochemical production of O₃ (P(O₃)) due to ship emissions in the CA was found to increase by a mean of 1.5 ppb h^?1 (especially by ≥10 ppb h^?1 at the DS site) during the day.