Isolation of Salmonella typhimurium Tn5 mutants defective for survival on egg shell surface using transposon footprinting

The objective of this study was to screen the genome of Salmonella typhimurium for genes potentially required for survival on egg shell surfaces using a novel transposon footprinting method based on a previously developed Tn5 mutagenesis technique. Since the amplified DNA fragment length should usually be unique for each mutant, the polymerase chain reaction products separated on an agarose gel generate a transposon footprint with each band in the footprint representing the corresponding Tn5 mutant. By comparing the footprints from the pools of S. typhimurium Tn5 mutants before and after inoculation on egg shell surfaces, Tn5 mutants not recovered after selection were rapidly identified for potential isolation and genetic analysis.     

Monitoring of non-point source pollutants load from a mixed forest land use

The aim of this study was to determine the unit load of NPS (non-point source) pollutants including organic variables such as BOD (biochemical oxygen demand),COD (chemical oxygen demand) and DOC (dissolved organic carbon),nitrogen and phosphorus constituents,and suspended solids (SS) and their event mean concentration (EMC) of runoff flows from a water-shed of mixed forest land use by intensive field experiments.Field monitoring for continuous measurements of rainfall,flow,and water quality was conducted over 12 storm events during 2008–2009 using automated and manual sampling methods.The EMCs of individual runoff event were estimated for each water quality constituent based on the flow rate and concentration data of runoff discharge.The average EMCs of BOD,COD,DOC,SS,TN (total nitrogen),NH 4+ -N,NO 3- -N,TP (total phosphorus),PO 43- -P from the mixed forest land were 1.794,3.498,1.462,10.269,0.862,0.044,0.634,0.034,and 0.005 mg/L,respectively.The annual unit loads of BOD,COD,DOC,SS,TN,NH 4+ -N,NO 3- -N,TP and PO 43--P were estimated as 66.9,133.2,55.5,429.8,36.5,1.6,26.9,1.3 and 0.1 kg/(ha·yr),respectively.In addition,affecting parameters on the EMCs were investigated by statistic analysis of the field data.As a result,significant correlations with precipitation,rainfall intensity,and total runoff flows were found in most constituents.     

Development of a cloud condensation nuclei (CCN) counter using a laser and charge-coupled device (CCD) camera

A continuous flow streamwise thermal gradient cloud condensation nuclei (CCN) counter with an aerosol focusing and a laser-charge-coupled device (CCD) camera detector system was developed here. The counting performance of the laser-CCD camera detector system was evaluated by comparing its measured number concentrations with those measured with a condensation particle counter (CPC) using polystyrene latex (PSL) and NaCl particles of varying sizes. The CCD camera parameters (e.g. brightness, gain, gamma, and exposure time) were optimized to detect moving particles in the sensing volume and to provide the best image to count them. The CCN counter worked well in the particle number concentration range of 0.6–8000 #·cm⁻³ and the minimum detectable size was found to be 0.5 μm. The supersaturation in the CCN counter with varying temperature difference was determined by using size-selected sodium chloride particles based on K?hler equation. The developed CCN counter was applied to investigate CCN activity of atmospheric ultrafine particles at 0.5% supersaturation. Data showed that CCN activity increased with increasing particle size and that the higher CCN activation for ultrafine particles occurred in the afternoon, suggesting the significant existence of hygroscopic or soluble species in photochemically-produced ultrafine particles.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.     

Characteristic occurrence patterns of micropollutants and their removal efficiencies in industrial wastewater treatment plants

The concentrations and removal efficiencies of various kinds of micropollutants were investigated and the relationships between the input sources of industrial wastewater and occurrence patterns of each micropollutant were identified at nine on-site industrial wastewater treatment plants (WWTPs). The distribution pattern of each compound varied according to the WWTP type and several micropollutants were significantly related with specific industries: chlorinated phenols (ClPhs) with paper and metal industries, polycyclic aromatic hydrocarbons (PAHs) with petrogenic- and pyrogenic-related industries, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) with the paper industry, and chlorinated benzenes (ClBzs) with dye-related industries. The activated sludge (AS) process was very efficient in the removal of ClPhs and PAHs, and the filtration process in the removal of PCDD/Fs and 1,4-dioxane. Generally, the removal efficiencies of each micropollutant varied according to the WWTP type.     

Degradation of different pesticides in water by microplasma: the roles of individual radicals and degradation pathways

Environmental Science and Pollution Research - Pesticides are emergent toxins often identified in aquatic environments. In the present study, microplasma was employed to reduce the pesticide...     

Effects of ozonation and coagulation on effluent organic matter characteristics and ultrafiltration membrane fouling

Effluent organic matter （EfOM） is the major cause of fouling in the low pressure membranes process for wastewater reuse. Coagulation and oxidation of biological wastewater treatment effluent have been applied for the fouling control of microfiltration membranes. However, the change in EfOM structure by pre-treatments has not been clearly identified. The changes of EfOM characteristics induced by coagulation and ozonation were investigated through size exclusion chromatography, UV/Vis spectrophotometry, fluorescence spectrophotometry and titrimetric analysis to identify the mechanisms in the reduction of ultrafiltration （UF） membrane fouling. The results indicated that reduction of flux decline by coagulation was due to modified characteristics of dissolved organic carbon （DOC） content. Total concentration of DOC was not reduced by ozonation. However, the mass fraction of the molecules with molecular weight larger than 5 kDa, fluorescence intensity, aromaticity, highly condensed chromophores, average molecular weight and soluble microbial byproducts decreased greatly after ozonation. These results indicated that EfOM was partially oxidized by ozonation to low molecular weight, highly charged compounds with abundant electron- withdrawing functional groups, which are favourable for alleviating UF membrane flux decline.     

Two-Dimensional Automatic Control Modeling of a Posture Control System

A posture control model has been developed on the basis of the 2-dimensional feedback control theory. Human postural characteristics were investigated in 5 healthy participants. Tests were performed with eyes open and eyes closed. After 5 s of quiet standing, each participant was unexpectedly pulled forward by 30 mm at his pelvis height and then released. Postural sway was measured over 20 s at a rate of 100 per second. Transfer functions to represent the posture control characteristic were identified by the least squares' method. These showed good results of the model's fitness, predictability, and stability. The response of the eyes-closed condition to perturbation is more oscillatory than that of the eyes-open condition. It seems that the model identified could be applicable to ergonomics, sports, or clinical situations.     

Innovative method of culturing bdelloid rotifers for the application of wastewater biological treatment

• An innovative method of culturing bdelloid rotifer fed on flour was proposed. • Rotifer fed on flour grew faster than that fed on bacteria or Chlorella vulgaris. • The optimum mass culture conditions for rotifer fed on flour were investigated. • The cultured rotifer could improve sludge settleability in the SBR. This study aims to establish a simple and efficient method for the mass culture of bdelloid rotifers, which is the basis for the application of bdelloid rotifers as biological manipulators to improve wastewater biological treatment performance. A common bdelloid rotifer, Habrotrocha sp., in a wastewater biological treatment system was selected as the culture target. Rotifers fed on flour could reproduce faster than those fed traditional food such as Chlorella vulgaris or mixed bacteria. As a rotifer food, flour has the advantages of simple preparation, effortless preservation, and low cost compared to live Chlorella vulgaris or mixed bacteria, so it is more suitable for the mass culture of rotifers. The optimal rotifer culture conditions using flour as food were also studied. According to the experimental results, the recommended rotifer culture conditions are a flour particle size of 1 μm, a flour concentration of 6 × 10⁶ cell/mL, a temperature of 28℃, a pH level of 6.5 and salinity of 100–500 mg/L. In addition, the sludge volume index in the sequencing batch reactor (SBR) with the addition of cultured rotifers was 59.9 mL/g at the end of operation and decreased by 18.2% compared to SBR without rotifer, which indicates that the cultured rotifers still retained the function of helping to improve sludge settling. This function may be related to the rotifer’s role in inhibiting bacteria from producing loosely bound extracellular polymeric substances in the SBR.     

Service life of sewage culvert with bacteria coating from waste sludge and negative pressure method

Journal of Material Cycles and Waste Management - In this study, a bacteria coating resistant to sulfate attack using materials with bacteria immobilization has been developed. For core coating...