Physical properties and biodegradability of blends containing poly(ε-caprolactone) and tropical starches

In order to assess feasibility of tropical starches (sago and cassava starches) as biodegradable plastic materials, blending with poly(-caprolactone) (PCL), a biodegradable polymer, was carried out. It was confirmed that the physical properties (tensile strength and elongation) of PCL/sago and PCL/cassava blends were similar to those of PCL/corn blend, suggesting that sago and cassava starches can also be blended with PCL for production of biodegradable plastic. However, the properties of all PCL/starch blends were still low compared with those of polyethylene. Enzymatic degradability evaluation showed that lipase degradation of PCL and-amylase degradation of starch increased as the starch content in the blend increased. Burial test of the blends for 1, 3, and 5 months was carried out and the rate of degradation of the PCL/sago blend was confirmed to be slower than those of PCL/corn and PCL/cassava blends. Observation of the film blends structure by scanning electron microscope revealed that the starch was dispersed in a PCL continuous phase. Furthermore, changes in the film surface before and after enyzme treatments were observed.     

Phosphate recovery from phosphorus-rich solution obtained from chicken manure incineration ash

The recovery of phosphorus from waste is very important for Japan because Japan has no natural phosphorus resources. In order to recover phosphorus from incineration ash of chicken manure, an acid dissolution–alkali precipitation method was investigated. Phosphorus content in the ash was 8%. The ash was treated with hydrochloric acid to obtain phosphorus-rich solution. Phosphorus could then be recovered as a precipitant by adding sodium hydroxide solution into the phosphorus-rich solution and gradually changing the pH in the solution to 3, 4, and 8. At pH 3, a small amount of phosphorus was precipitated to remove iron, which would cause coloring of subsequent precipitants. At pH 4, 84% of the phosphorus in the original solution could be recovered as CaHPO₄ · 2H₂O with a purity of 92%. At pH 8, 8% of the phosphorus in the phosphorus-rich solution could be recovered as identified hydroxyapatite. A recovery rate of 92% phosphorus as CaHPO₄ · 2H₂O and identified as hydroxyapatite was achieved.     

A new class of mealybug pheromones: a hemiterpene ester in the sex pheromone of Crisicoccus matsumotoi

Mealybugs, which include several agricultural pests, are small sap feeders covered with a powdery wax. They exhibit clear sexual dimorphism; males are winged but fragile and short lived, whereas females are windless and less mobile. Thus, sex pheromones emitted by females facilitate copulation and reproduction by serving as a key navigation tool for males. Although the structures of the hitherto known mealybug pheromones vary among species, they have a common structural motif; they are carboxylic esters of monoterpene alcohols with irregular non-head-to-tail linkages. However, in the present study, we isolated from the Matsumoto mealybug, Crisicoccus matsumotoi (Siraiwa), a pheromone with a completely different structure. Using gas chromatography–mass spectrometry and nuclear magnetic resonance spectroscopy, we identified the pheromone as 3-methyl-3-butenyl 5-methylhexanoate. Its attractiveness to males was confirmed in a series of field trapping experiments involving comparison between the isolated natural product and a synthetic sample. This is the first report of a hemiterpene mealybug pheromone. In addition, the acid moiety (5-methylhexanoate) appears to be rare in insect pheromones.     

Removal of estrogens by electrochemical oxidation process

Treatments of estrogens such as Estrone(E1), Estradiol(E2) and Ethinylestradiol(EE2) were conducted using an electrolytic reactor equipped with multi-packed granular glassy carbon electrodes.Experimental results showed that E1, E2 and EE2 were oxidized in the range of 0.45–0.85 V and were removed through electro-polymerization. Observed data from continuous experiments were in good agreement with calculated results by a mathematical model constructed based on mass transfer limitation. In continuous treatment of trace estrogens(1 μg/L), 98% of E1, E2 and EE2 were stably removed. At high loading rate(100 μg/L), removal efficiency of E1 was kept around 74%–88% for21 days, but removal efficiency reduced due to passivation of electrodes. However, removal efficiency was recovered after electrochemical regeneration of electrodes in presence of ozone. Electric energy consumption was observed in the range of 1–2 Wh/m3. From these results, we concluded that the present electrochemical process would be an alternative removal of estrogens.     

Solid-state anaerobic co-digestion of food waste,rice straw,and rice husk supplemented with cattle digesta under thermophilic conditions

Journal of Material Cycles and Waste Management - Improving the solid-state digestion of food waste (FW) is important for recovering energy and utilizing the digested residue as fertilizer. Herein,...     

Recent advances in ionic liquids-based hybrid processes for CO2 capture and utilization

CO₂ capture and utilization (CCU) is an effective strategy to mitigate global warming. Absorption, adsorption and membranes are methods used for CO₂ separation and capture, and various catalytic pathways have also been developed for CO₂ utilization. Although widely researched and used in industry, these processes are energy-intensive and this challenge needs to be overcome. To realize further optimization, novel materials and processes are continuously being developed. New generation materials such as ionic liquids (ILs) have shown promising potential for cost-effective CO₂ capture and utilization. This study reviews the current status of ILs-based solvents, adsorbents, membranes, catalysts and their hybrid processes for CO₂ capture and utilization. The special properties of ILs are integrated into new materials through hybridization, which significantly improves the performance in the process of CCU.     

Influence of age-related stature on the frequency of body region injury and overall injury severity in child pedestrian casualties

OBJECTIVE: The current study aims to evaluate the influence of age-related stature on the frequency of body region injury and overall injury severity in children involved in pedestrian versus motor vehicle collisions (PMVCs). METHODS: A trauma registry including the coded injuries sustained by 1,590 1- to 15-year-old pedestrian casualties treated at a level-one trauma center was categorized by stature-related age (1-3, 4-6, 7-9, 10-12, and 13-15 years) and body region (head and face, neck, thorax, abdomen and pelvic content, thoracic and lumbar spine, upper extremities, pelvis, and lower extremities). The lower extremity category was further divided into three sub-structures (thigh, leg, and knee). For each age group and body region/sub-structure the proportion of casualties with at least one injury was then determined at given Abbreviated Injury Scale (AIS) severity levels. In addition, the average and distribution of the Maximum Abbreviated Injury Score (MAIS) and the average Injury Severity Score (ISS) were determined for each age group. The calculated proportions, averages, and distributions were then compared between age groups using appropriate significance tests. RESULTS: The overall outcome showed relatively minor variation between age groups, with the average +/- SD MAIS and ISS ranging from 2.3 +/- 0.9 to 2.5 +/- 1.0 and 8.2 +/- 7.2 to 9.4 +/- 8.9, respectively. The subjects in the 1- to 3-year-old age group were more likely to sustain injury to the head, face, and torso regions than the older subjects. The frequency of AIS 2+ lower extremity injury was approximately 20% in the 1- to 3-year-old group, but was twice as high in the 4- to 12-years age range and 2.5 times as high in the oldest age group. The frequency of femur fracture increased from 10% in the youngest group to 26% in the 4- to 6-year-old group and then declined to 14% in the 10- to 15-years age range. The frequency of tibia/fibula fracture increased monotonically with group age from 8% in the 1- to 3-year-old group to 31% in the 13- to 15-year-old group. CONCLUSIONS: While the overall outcome of child pedestrian casualties appears to be relatively constant across the pediatric stature range considered ( approximately 74-170 cm), subject height seems to affect the frequency of injury to individual body regions, including the thorax and lower extremities. This suggests that vehicle safety designers need not only account for the difference in injury patterns between adult and pediatric pedestrian casualties, but also for the variation within the pediatric group.     

Development of drone-type float for surface-velocity measurement in rivers

Environmental Fluid Mechanics - The present study develops a safety survey system for measuring natural river discharge. Monitoring of rivers is very important for river environment conservation...