Assessment of the Water Quality of Troia for the Multipurpose Usages

The aim of this study was to determine the origin and quality of waters in Troia. For this purpose total of 25 water samples including 2 springs, 14 surfaces and 9 groundwaters, were collected at eight different times. Global positioning system (GPS) was used to determine to coordinates of sampling points. The concentration of 6 minor elements (B, Cu, F, Fe, Pb and Zn), 9 major anions and cations (Na(+), Ca(2+), K(+), Mg(2+), SO(4)(2-), PO(4)(3-), HCO(3)(-), Cl(-) and, CO(3)(2-)) were determined by spectrometric, colorimetric and volumetric methods. Water pH, EC, DO, ORP and TDS were measured in situ using probes. The data showed that the concentrations of most of minor elements were below the EPA and TSE limits except Pb which ranged between 0.001 and 4.832 mg L(-1). Statistically significant relationships (P<0.01 and r>0.70) were observed between Fe and Cu, Cu and K(+), Cu and Ca(2+), B and Na(+), Na(+) and K(+). Assessing the water based on irrigation using Wilcox model showed that some well waters were not suitable for irrigation. Troia water was found to be highly corrosive and the average corrosion coefficients varied from 0.5 to 4.6. According to the Piper and Schoeller diagrams results, the water in Troia was classified as mixed water type.     

Stability of some quality traits in bread wheat (Triticum aestivum) genotypes

This study was carried out in order to determine some quality traits such as thousand grain weight (TGW), hectoliter weight (HW), grain protein content (GPC), Zeleny sedimentation volume (ZSV) and stability of quality traits of 25 bread wheat genotypes. The experiment was conducted at seven environmental conditions during 2 growing periods (2003-2004 and 2004-2005) using randomized complete block design with four replicates. The ANOVA showed that out of the total sum of squares, 48.4, 28.0 and 23.6% for TGW, 71.4, 14.9 and 13.7% for HW, 54.4, 23.0 and 22.6% for GPC, 44.7, 41.7 and 13.6% for ZSV was attributable to E, G and G x E interaction effects, respectively. Thousand grain weight, hectoliter weight, grain protein content and Zeleny sedimentasyon volume of genotypes changed from 34.5 to 41.4 g, from 76.5 to 80.4 Kg, from 11.49 to 13.37% and from 22.1 to 46.0 ml, respectively. Seven stability parameters, covering a wide range of statistical approaches, were used so as to predict the genotypes. The study of genotypic stability showed that Bezostaya and advanced lines numbered 11 and 24 had high stability for quality traits and proved to be the best within the pool of the studied genotypes. Also, 8 and 17 numbered genotypes demonstrated high stability for TGW, HW, GPC and HW, GPC and ZSV, respectively.     

Higher number of microplastics in tumoral colon tissues from patients with colorectal adenocarcinoma

Environmental Chemistry Letters - Microplastics have been detected in marine and terrestrial ecosystems, yet the toxic effects of microplastics on living organisms are poorly known. In particular,...     

Effect of persistent trace compounds in landfill gas on engine performance during energy recovery: A case study

Performances of gas engines operated with landfill gas (LFG) are affected by the impurities in the LFG, reducing the economic viability of energy recovery. The purpose of this study was to characterize the trace compounds in the LFG at the Odayeri Landfill, Istanbul, Turkey which is used for energy recovery. Composite gas samples were collected and analyzed for trace compounds (hydrocarbons, siloxanes, and volatile halogenated hydrocarbons) over a 3-year period. Trace compounds entering the gas engines, their impact on the engine performance were evaluated. The operational problems included deposit formation in the combustion chamber, turbocharger, and intercooler of engine before the scheduled maintenance times. High levels of hydrogen sulfide, as well as chlorinated and fluorinated compounds cause corrosion of the engine parts and decrease life of the engine oils. Persistence of siloxanes results in deposit formation, increasing engine maintenance costs. Pretreatment of LFG is necessary to protect the engines at the waste-to-energy facilities with persistence levels of siloxanes and volatile halogenated hydrocarbons.     

Prenatal sonographic features of esophageal and ileal duplications at 18 weeks of gestation

We present a case of esophageal and ileal duplications at 18 weeks of gestation. Transabdominal ultrasonography of the fetus showed multiple cystic masses of 12 to 17 mm in diameter and continuity with each other in the abdomen and a unilocular cystic mass of 15 mm in diameter in the posterior mediastinum. The cystic mass filled the abdominal cavity with signs of intestinal obstruction. The thoracic cystic mass was tubular, sausage-shaped and behind the heart, which was displaced to the antero-lateral wall of the chest. Amniocentesis revealed a normal fetal karyotype 46,XY. Peristaltic movements in the abdominal cystic structure at 30 weeks of gestation suggested dilated intestinal loops. Follow-up ultrasound examinations showed polyhydramnios with amniotic fluid index of 30 cm and gradual enlargement of the cystic structures to 50 mm in the abdomen and 30 mm in the posterior mediastinum at 38 weeks of gestation. A male infant weighing 3900 g was delivered. Postnatal ultrasonographic examination and the findings of magnetic resonance imaging also suggested enteric duplication cysts. Prenatal diagnosis allowed prompt neonatal evaluation and surgical treatment of the esophageal and the ileal duplications, which was confirmed by pathological examination. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of the impact of various vertical release patterns on the atmospheric dispersion and total deposition of 137Cs from Chernobyl Nuclear Power Plant accident

Environmental Science and Pollution Research - The Chernobyl Nuclear Power Plant (NPP) catastrophe of 1986 has been a milestone in the use of nuclear power for energy generation. After the...     

Electrospun Composite Nanofibers Based on Poly (ε-Caprolactone) and Styrax Liquidus (Liquidambar orientalis Miller) as a Wound Dressing: Preparation,Characterization, Biological and Cytocompatibility Results

Journal of Polymers and the Environment - In this study, styrax liquidus (sweet gum balsam) extracted from Liquidambar orientalis Mill. incorporated PCL fibrous scaffolds were prepared using the...     

Assessment of risk factors in forest road design and construction activities with fuzzy analytic hierarchy process approach in Turkey

Forest road design and construction are time-consuming and complicated because various risk factors can be encountered during the process. The aim of this study is to comprehensively assess the risk factors in forest road design and construction using the fuzzy analytic hierarchy process (AHP) method in Turkey, thus contributing to the proper performance of these activities. Within the scope of the study, six main risk factors and 22 sub-risk factors were identified based on literature review. In order to determine the weights of the relevant risk factors, the opinions of three different groups [(group 1: academicians), (group 2: forest engineers (private sector employees + public sector employees)), (group 3: group 1 + group 2)] about the risk factors were obtained. Relevant risk factor weights were determined using the fuzzy AHP method. According to group 3, the most important main risk factors are technical risks and environmental risks. In addition, the most important sub-risk factors for each relevant main risk factor were incorrect road alignment, inadequate work safety in the field, insufficient capital, legal problems on the road alignment, landslide risk during road construction, and illegal logging. Differences were observed between groups 1 and 2 in the weight rankings of relevant risk factor. The results demonstrate that the fuzzy AHP method can be used effectively to assess the risks of forest road design and construction.     

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf

Pseudevernia furfuracea (L.) Zopf biosorption efficiency for zinc(II) was determined. The biosorption efficiency of Zn(II) onto P. furfuracea was significantly affected by the parameters of pH, biomass concentration, stirring speed, contact time, and temperature. The maximum biosorption efficiency of P. furfuracea was 92% at 10 mg/L Zn(II), for 5 g/L lichen biomass dosage. The biosorption of Zn(II) ions onto biomass was better described by the Langmuir model and the pseudo-second-order kinetic. The obtained thermodynamic parameters from biosorption of Zn(II) ions onto biomass were feasible, exothermic, and spontaneous. The different desorbents were used to perform the desorption studies for Zn(II)-loaded biomass. Fourier transform infrared (FTIR) spectroscopy was used to determine the participating functional groups of P. furfuracea biomass in Zn (II) biosorption. The broad and strong bands at 3292–3304 cm^?1 were due to bound hydroxyl (–OH) or amine (–NH) groups. The effective desorptions were obtained up to 96% with HNO₃. P. furfuracea is an encouraging biosorbent for Zn(II) ions, with high metal biosorption and desorption capacities, availability, and low cost. It was believed that by using this new method in which biomass is used as a sorbent, the toxic pollutants could be selectively removed from aqueous solutions to desired low levels. The remarkable properties of lichens in the transformation and detoxification of organic and inorganic pollutants are well known, and many processes have received attention in the general area of environmental biotechnology and microbiology.

Implications:The remarkable properties of lichens in the biosorption capacity of organic and inorganic pollutants are well known, and many processes have received attention in the general area of environmental biotechnology and microbiology.     

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Journal of Polymers and the Environment - The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and...