Indices of Grassland Biodiversity in the Chihuahuan Desert Ecoregion Derived from Remote Sensing

Abstract: We used a relatively simple and direct remote-sensing approach to determine biodiversity values in arid ecosystems and thus identify potential conservation sites. We developed indices based on regression models between grass, shrub, litter, exposed-soil groundcover components, and Landsat thematic mapper satellite imagery reflectance values over a reference site in the northern Chihuahuan Desert in New Mexico. This site supports low-disturbance desert grasslands that have been excluded from livestock grazing for 55 years and moderate-disturbance grasslands that have been under a continuous grazing regime for over 100 years. Greater richness and abundance of noninvasive and nonruderal plant species were associated with the low-disturbance grasslands that had lower shrub abundance, increased litter and grass cover, and lower exposed soil. Using the thematic mapper indices, we computed an additive grassland biodiversity index such that, as exposed soil and shrub values go down, litter and grass values go up, as does the biodiversity index. When the biodiversity index was applied to the reference-site landscape, grasslands previously identified for their high conservation value were detected. As a further test, we applied the indices to a site in Chihuahua, Mexico, that supports similar grasslands but for which there are few other data on condition and conservation values. The soil, grass, and shrub indices were moderately effective in describing the range of variation at the Mexico site, but the litter equation was not. Still, higher biodiversity value in terms of nonruderal plant diversity tended to correspond to higher grass cover and lower soil exposure and a higher overall biodiversity index. Some localized calibration with geologic substrate may be required along with an assessment of the temporal constraints, but generally the index shows promise for quickly and efficiently detecting desert grasslands of high biodiversity conservation value.     

Estimating the aquatic emissions and fate of perfluorooctane sulfonate (PFOS) into the river Rhine

The sources, distribution, levels and sinks of perfluorooctane sulfonate (PFOS) estimated to be released from areas of high population density, have been explored using the river Rhine as a case study. A comparison between modelled and measured data is presented, along with analysis of the importance of PFOS sorption in riverine systems. PFOS releases into the Rhine were estimated to be 325-690 kg/yr based on per capita emission rates of 27-57 μg day(-1) from a population of 33 million living within a 50 km zone either side of the river. Sorption of PFOS to suspended particles and sediments may alter its fate in the aquatic environment. Therefore available measured and modelled partitioning data was assessed, and K(d) values (sorption coefficient) of 7.5 and 20 were selected. This resulted in sediment-water ratios of 23-76 : 1, which are similar to ratios reported in the literature, and resulted in modelled estimates that <20% of the total PFOS entering the Rhine binds to sediments or suspended particles. The calculated discharge from the Rhine to the North Sea based on measured data was 420-2200 kg/yr; our model predictions are in good agreement with these estimates. Emission trends were accurately predicted, suggesting population density can be effectively used as a surrogate for diffuse PFOS emissions from product use, while predicted concentrations were a factor of 2-4 below measured data showing the importance of other sources. Transfer of PFOS to sediment is estimated to be minimal, and consequently discharges to the North Sea are roughly equal to PFOS releases to river water.     

Factor analysis of H2S emission at a wastewater lift station: a case study

Odor and corrosion are common problems in domestic wastewater collection, transportation, pumping, and treatment processes. Based on the comparison among odorous compounds and onsite observations at a wastewater lift station, H₂S is more likely to have caused the odor and corrosion problems than methanethiol and other organic sulfides. The field data from both air and wastewater quality monitoring demonstrated that more H₂S (1 ppmv) was formed at a more negative redox potential, lower pH, and a higher temperature of wastewater. Since the lower detection level of most current analytical techniques is much greater than human’s smell and the reference concentration for adverse health effects, automatic monitoring on the threshold of H₂S formation provides a mechanism to trigger control techniques only when necessary for cost saving purposes. Based on Gibbs free energy, a more negative redox potential is required to form H₂S with an increase in pH and a decrease in temperature and SO ₄ ^2? concentration. However, pH effect is more significant than both temperature and SO ₄ ^2? concentration for H₂S formation. It is recommended that H₂S control techniques be started when the redox potential is below ?44 mV, the pH is lower than 5.6, and the temperature is higher than 11.5 °C to control H₂S below the reference concentration. Corroded concrete particles were examined by X-ray diffraction, which showed that the dominant crystal form was quartz.     

Influence of a portable air treatment unit on health-related quality indicators of indoor air in a classroom

During periods of two weeks in February and June 2010 the performance of portable air treatment units (PATUs) was evaluated in a primary school classroom using indicators of indoor air quality. Air samples were collected in an undisturbed setting on weekend days and in an occupied setting during teaching hours. In the first week PATUs were turned off and in the second week they were turned on. On weekend days PATUs reduced indoor levels of PM-10 by 87% in February and by 70% in June compared to weekend days when PATUs were turned off. On schooldays, indoor PM-10 was increased by 6% in February and reduced by 42% in June. For PM-2.5 reductions on weekend days were 89% in February and 80% in June. On school days PM-2.5 was increased by 15% in February and reduced by 83% in June. Turning on the PATUs reduced total VOC by 80% on weekend days and by 57% on school days (but not in June). No influence on formaldehyde, NO(2), O(3) and molds was observed. PATUs appeared to be less effective in removal of air pollutants when used in an occupied classroom compared to an unoccupied setting. Our study suggests that such devices should be tested in real-life settings to evaluate their influence on indoor air quality.     

The effect of changes in land use on nitrate concentration in water supply wells in southern Chester County, Pennsylvania

An analysis of private potable water well data was conducted for seven single family residential developments in southern Chester County, Pennsylvania. Background data were available for 165 wells within the communities when the wells were first drilled in the 1980s and early 1990s. Sampling of 75 wells within these same communities was performed in 2006 to determine whether conversion of the land to residential housing along with the use of conventional on-lot septic systems had resulted in elevated concentration of nitrate-nitrogen in the drinking water aquifer. The data indicate that prior land use influenced the occurrence of nitrate-nitrogen in the drinking water aquifer. The median nitrate-nitrogen concentration for the 165 wells in the background dataset was 2.9 mg/L. One hundred-seven of those wells were drilled on land previously used for active agricultural purposes. The median nitrate concentration in these wells was 3.8 mg/L. Of 48 wells drilled on forested land, the median nitrate concentration was 1.1 mg/L, approximately 3.5 times lower than those drilled on active agricultural land. The median nitrate concentration in the 2006 sampling dataset was 3.6 mg/L, an increase of 0.7 mg/L. The data indicate that conversion of the land has not resulted in contamination of the drinking water aquifer with respect to nitrate-nitrogen. Likewise, the data suggest that the conversion has not resulted in significant improvements to overall water quality.     

Feasibility of coupling a thermal/optical carbon analyzer to a quadrupole mass spectrometer for enhanced PM2.5 speciation

A thermal/optical carbon analyzer (TOA), normally used for quantification of organic carbon (OC) and elemental carbon (EC) in PM_2.5 (fine particulate matter) speciation networks, was adapted to direct thermally evolved gases to an electron impact quadrupole mass spectrometer (QMS), creating a TOA-QMS. This approach produces spectra similar to those obtained by the Aerodyne aerosol mass spectrometer (AMS), but the ratios of the mass to charge (m/z) signals differ and must be remeasured using laboratory-generated standards. Linear relationships are found between TOA-QMS signals and ammonium (NH₄⁺), nitrate (NO₃^?), and sulfate (SO₄^2-) standards. For ambient samples, however, positive deviations are found for SO₄^2-, compensated by negative deviations for NO₃^?, at higher concentrations. This indicates the utility of mixed-compound standards for calibration or separate calibration curves for low and high ion concentrations. The sum of the QMS signals across all m/z after removal of the NH₄⁺, NO₃^?, and SO₄^2- signals was highly correlated with the carbon content of oxalic acid (C?H?O?) standards. For ambient samples, the OC derived from the TOA-QMS method was the same as the OC derived from the standard IMPROVE_A TOA method. This method has the potential to reduce complexity and costs for speciation networks, especially for highly polluted urban areas such as those in Asia and Africa.

Implications: Ammonium, nitrate, and sulfate can be quantified by the same thermal evolution analysis applied to organic and elemental carbon. This holds the potential to replace multiple parallel filter samples and separate laboratory analyses with a single filter and a single analysis to account for a large portion of the PM_2.5 mass concentration.     

Silver near municipal wastewater discharges into western Lake Ontario,Canada

Because of the widespread use of silver nanoparticles in commercial products, discharges of municipal wastewater may be a point source of silver in the aquatic environment. We monitored two sites in western Lake Ontario impacted by discharges from wastewater treatment plants serving the City of Toronto. Concentrations of silver were elevated in bottom sediments and suspended sediments collected at the two sites. We also deployed two types of passive samplers in the water column at the two sites, the newly developed Carbon Nanotube Integrative Samplers for monitoring “CNIS-labile” silver and Diffusive Gradient in Thin Film samplers for monitoring “DGT-labile” silver. Results from these passive samplers indicated that the concentrations of silver at the two sites were either below detection limits or were in the ng/L range. In laboratory experiments where the sediments were re-suspended in Milli-Q water, a small proportion of the silver (i.e., <?25%) was labile and partitioned as colloidal or dissolved silver into the liquid phase after agitation. Nanoparticles tentatively identified as silver nanoparticles were detected by single-particle ICP-MS in suspension after agitation of both suspended and bottom sediments. Therefore, there is a need to assess whether silver species, including silver nanoparticles are transported from wastewater treatment plants into sediments in the aquatic environment. This study is unique in focusing on the in situ distribution of silver in natural waters and in sediments that are potentially impacted by urban sources of nanoparticles.     

Assessment using CFD of the wind direction on the air discharges caused by natural ventilation of a poultry house

Air inside poultry houses must be removed on a regular basis to prevent excess of heat, particles and noxious gases that can imperil animals. To cope with this issue, natural ventilation could be an effective method when assisted by accurate predictions. This study investigates air discharges caused by natural ventilation of a poultry house by means of a three-dimensional computational fluid dynamics (CFD) model. It solves the governing equations of momentum, heat and mass transport, radiative transfers and animal-generated heat. Wind directions of 0°, 36° and 56° (0° corresponds to a wind blowing perpendicular to the ridgeline) were investigated; the CFD model predictions achieved a RMSE of 1.2 °C and 0.6 g[H₂O] kg^?1 [dry air] for internal temperature and absolute humidity, respectively, when air blew with an angle of 36°. Air renewal rates (ARR) were 39.5 (±?1.9), 34.9 (±?2.2) and 33.6 (±?1.7) volumes of the building per hour, when air blew at 0°, 36° and 56°, respectively. Such ARR predictions served to know how the gases contained in air would likely spread downstream from the building in order to define regions of potentially high gas concentration that could endanger neighbouring habitable facilities.