Emissions from carpet combustion in a pilot-scale rotary kiln: comparison with coal and particle-board combustion

The use of post-consumer carpet as a potential fuel substitute in cement kilns and other high-temperature processes is being considered to address the problem of huge volumes of carpet waste and the opportunity of waste-to-energy recovery. Carpet represents a high volume waste stream, provides high energy value, and contains other recoverable materials for the production of cement. This research studied the emission characteristics of burning 0.46-kg charges of chopped nylon carpet squares, pulverized coal, and particle-board pellets in a pilot-scale natural gas-fired rotary kiln. Carpet was tested with different amounts of water added. Emissions of oxygen, carbon dioxide, nitric oxide (NO), sulfur dioxide (SO2), carbon monoxide (CO), and total hydrocarbons and temperatures were continuously monitored. It was found that carpet burned faster and more completely than coal and particle board, with a rapid volatile release that resulted in large and variable transient emission peaks. NO emissions from carpet combustion ranged from 0.06 to 0.15 g/MJ and were inversely related to CO emissions. Carpet combustion yielded higher NO emissions than coal and particle-board combustion, consistent with its higher nitrogen content. SO2 emissions were highest for coal combustion, consistent with its higher sulfur content than carpet or particle board. Adding water to carpet slowed its burn time and reduced variability in the emission transients, reducing the CO peak but increasing NO emissions. Results of this study indicate that carpet waste can be used as an effective alternative fuel, with the caveats that it might be necessary to wet carpet or chop it finely to avoid excessive transient puff emissions due to its high volatility compared with other solid fuels, and that controlled mixing of combustion air might be used to control NO emissions from nylon carpet.     

Soil suspension/dispersion modeling methods for estimating health-based soil cleanup levels of hexavalent chromium at chromite ore processing residue sites

The primary health concern associated with exposures to chromite ore processing residue (COPR)-affected soils is inhalation of hexavalent chromium [Cr(VI)] particulates. Site-specific soil alternative remediation standards (ARSs) are set using soil suspension and dispersion models to be protective of the theoretical excess cancer risk associated with inhalation of soil suspended by vehicle traffic and wind. The purpose of this study was to update a previous model comparison study that identified the 1995 AP-42 particulate emission model for vehicle traffic over unpaved roads and the Fugitive Dust Model (FDM) as the most appropriate model combination for estimating site-specific ARSs. Because the AP-42 model has been revised, we have updated our past evaluation. Specifically, the 2006 AP-42 particulate emissions model; the Industrial Source Complex-Short Term model, version 3 (ISCST3); and the American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) air dispersion models were evaluated, and the results were compared with those from the previously used modeling approaches. Two sites with and two sites without vehicle traffic were evaluated to determine if wind erosion is a significant source of emissions. For the two sites with vehicle traffic, both FDM and ISCST3 produced total suspended particulate (TSP) estimates that were, on average, within a factor of 2 of measured; whereas AERMOD produced estimates that were as much as 5-fold higher than measured. In general, the estimated TSP concentrations for FDM were higher than those for ISCST3. For airborne Cr(VI), the ISCST3 model produced estimates that were only 2- to 8-fold of the measured concentrations, and both FDM and AERMOD estimated airborne Cr(VI) concentrations that were approximately 4- to 14-fold higher than measured. Results using the 1995 AP-42 model were closer to measured than those from the 2006 AP-42 model. Wind erosion was an insignificant contributor to particulate emissions at COPR sites.     

Perceived landscape impacts of mobile telecommunications development in the Peak District National Park,England

This study explored the public perceptions of mobile telecommunications development – new landscape elements installed to deliver new technology – in a protected area. It examined: (1) the perceived landscape impacts of such development; (2) the importance attached to the socio-economic value of mobile telecommunications; and (3) the factors underlying the perceived landscape impacts of mobile telecommunications development. A postal questionnaire survey was conducted in the Peak District National Park, England with 420 respondents drawn from National Park residents and visitors, urban dwellers and members of environmental organisations. The study suggests that: (1) there was a prevailing antipathy towards the landscape impacts of mobile telecommunications development in the National Park; (2) apart from emergency uses, the other socio-economic benefits of mobile telecommunications technology were thought to be relatively unimportant in the National Park; and (3) rather than socio-demographic characteristics, it was respondents' understandings of protected areas' needs for the technology and potential health risks that had significant effects on the perceived landscape impacts. Overall, this study suggests that the significance of National Park landscapes is respected by the public, even when setalongside the convenience of modern technology, which has substantial implications for landscape planning and management in protected areas.     

Accumulation of dechlorination daughter products: A valid metric of chloroethene biodegradation

In situ reductive dechlorination of perchloroethene (PCE) and trichloroethene (TCE) generates characteristic chlorinated (cis‐dichloroethene [cis‐DCE] and vinyl chloride [VC]) and nonchlorinated (ethene and ethane) products. The accumulation of these daughter products is commonly used as a metric for ongoing biodegradation at field sites. However, this interpretation assumes that reductive dechlorination is the only chloroethene degradation process of any significance in situ and that the characteristic daughter products of chloroethene reductive dechlorination persist in the environment. Laboratory microcosms, prepared with aquifer and surface‐water sediments from hydrologically diverse sites throughout the United States and amended with [1,2‐¹⁴C] TCE, [1,2‐¹⁴C] DCE, [1,2‐¹⁴C] DCA, or [1,2‐¹⁴C] VC, demonstrated widely variable patterns of intermediate and final product accumulation. In predominantly methanogenic sediment treatments, accumulation of ¹⁴C‐DCE, ¹⁴C‐VC, ¹⁴C‐ethene, and ¹⁴C‐ethane predominated. Treatments characterized by significant Fe(III) and/or Mn(IV) reduction, on the other hand, demonstrated substantial, and in some cases exclusive, accumulation of ¹⁴CO₂ and ¹⁴CH₄. These results suggest that relying on the accumulation of cis‐DCE, VC, ethene, and ethane may substantially underestimate overall chloroethene biodegradation at many sites. © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. government work and, as such, is in the public domain in the United States of America.

     

Socioeconomic consequences of mercury use and pollution

In the past, human activities often resulted in mercury releases to the biosphere with little consideration of undesirable consequences for the health of humans and wildlife. This paper outlines the pathways through which humans and wildlife are exposed to mercury. Fish consumption is the major route of exposure to methylmercury. Humans can also receive toxic doses of mercury through inhalation of elevated concentrations of gaseous elemental mercury. We propose that any effective strategy for reducing mercury exposures requires an examination of the complete life cycle of mercury. This paper examines the life cycle of mercury from a global perspective and then identifies several approaches to measuring the benefits of reducing mercury exposure, policy options for reducing Hg emissions, possible exposure reduction mechanisms, and issues associated with mercury risk assessment and communication for different populations.     

Removal of Prussian blue from contaminated soil in the rhizosphere of cyanogenic plants

The fate of radiolabeled cyanide in soil was investigated during exposure to cyanogenic plant species, sorghum (Sorghum bicolor var. P721) and flax (Linum usitassimum var. Omega-Gold), in fully-contained growth chambers. Labeled cyanide was subject to microbial transformation, assimilation by plant roots, incorporation and biodegradation in plant tissue. For this study, (14)C-labeled cyanide was added to soil, and distribution of (14)C activity was assessed before plant establishment and after harvest. After 3 months of plant growth, 7% of the (14)C-labeled cyanide was converted to (14)CO(2) with sorghum and 6% with flax, compared with only 2% conversion in unplanted soil. A small amount of unaltered cyanide was shown to be accumulated by the plants (approximately 140 mg cyanide/kg plant or <0.1% of the total). Results from this experiment demonstrate the potential of cyanogenic plants for use in phytoremediation of cyanide-contaminated soil.     

Assessment of polybrominated diphenyl ethers in eggs of waterbirds from South China

Concentrations of total polybrominated diphenyl ethers (PBDEs) in Ardeid eggs from Hong Kong, Xiamen and Quanzhou in south China ranged from 140-1000, 30-550 and 140-380ngg(-1), lipid wt., respectively. There were spatial and interspecies variations in the abundance and congeneric profiles of PBDEs. The different congeneric profiles observed among the study sites may be associated with the developmental phases of the cities, as well as a possible consequence of debromination of BDE209. Marked concentrations of higher-brominated diphenyl ethers (BDEs 183, 196, 197, 206, 207 and 209) were detected in the egg samples from all sites, probably indicating uptake of BDE209 by top predators, and that there is widespread occurrence of BDE209 in south China. Comparisons of egg concentrations of BDEs 47, 99, 153 and 209 with tentative critical concentrations for neurobehavioral effects and oxidative stress indicated some potential risks for BDE99 and BDE209 in the Ardeid populations.     

Collembola and macroarthropod community responses to carbamate, organophosphate and synthetic pyrethroid insecticides: direct and indirect effects

Non-target effects on terrestrial arthropod communities of the broad-spectrum insecticides chlorpyrifos and cypermethrin and the selective insecticide pirimicarb were investigated in winter wheat fields in summer. Effects of chlorpyrifos on arthropod abundance and taxonomic richness were consistently negative whereas effects of cypermethrin were negative for predatory arthropods but positive for soil surface Collembola. Pirimicarb effects were marginal, primarily on aphids and their antagonists, with no effect on the Collembola community. Collembola-predator ratios were significantly higher following cypermethrin treatment, suggesting that cypermethrin-induced increases in collembolan abundance represent a classical resurgence. Observations in other studies suggest Collembola resurgences may be typical after synthetic pyrethroid applications. Collembola responses to insecticides differed among species, both in terms of effect magnitude and persistence, suggesting that coarse taxonomic monitoring would not adequately detect pesticide risks. These findings have implications for pesticide risk assessments and for the selection of indicator species.     

Flood proneness and coping strategies: the experiences of two villages in Bangladesh

This paper explores peoples' indigenous survival strategies and assesses variations in people's ability to cope with floods in two flood‐prone villages in Bangladesh. It reveals that people continuously battle against flood vulnerability in accordance with their level of exposure and abilities, with varied strategies employed at different geophysical locations. The paper reports that people in an area with low flooding and with better socioeconomic circumstances are more likely to cope with impacts compared to people in areas with high and sudden flooding. Similarly, households' ability to cope varies depending on people's socioeconomic conditions, such as education, income and occupation. Although floods in Bangladesh generate socioeconomic misery and cause damage to the environment, health and infrastructure, people's indigenous coping strategies have helped them to reduce significantly their vulnerability. Such flood‐mitigating strategies should be well recognised and emphasised further via proper dissemination of information through an early‐warning system and subsequently external assistance.     

Effectiveness of dust dispersion in the 20-L Siwek chamber

The Siwek 20-L chamber is widely used throughout the world to evaluate the explosibility of dusts. This research evaluated the quality of dust dispersion in the Siwek 20-L chamber using Pittsburgh coal, Gilsonite, and purple K dusts. A Pittsburgh Research Laboratory (PRL) optical dust probe was used to measure optical transmittance through the dust cloud at various locations within the chamber. A total of 540 tests were performed, with triplicate tests at five nominal dust concentrations and six locations. The two standard dispersion nozzles (rebound and perforated annular nozzle) were compared. The transmissions corresponding to the normal ignition delay period were used to: (a) determine variations in spatial uniformity of dispersion obtained with both nozzles; (b) make comparisons between the experimental transmission data and those calculated from theory for the three dusts; and (c) make comparisons with transmission data measured in the PRL 20-L and Fike 1-m³ dust explosion chambers.The uniformity of dispersion for the three dusts was similar with both nozzles, despite the differences in nozzle geometry and mode of operation. Transmission data of the three dusts were all significantly lower than those calculated from theory. This was discovered to be, in part, due to significant reduction in particle size that occurred during dispersion. By measuring particle sizes before and after dispersion, values of 60%, 50%, and 20% reduction in particle size (based on the surface-weighted mean diameter) were obtained for Pittsburgh coal, Gilsonite, and purple K, respectively. Transmission data from the PRL 20-L, Fike 1-m³ and the Siwek 20-L chambers indicated comparable results in terms of uniformity of dispersion. However, transmission data from the Siwek 20-L chamber were significantly lower than those of the PRL and Fike chambers. Again, this was attributed, in part, to the significant reduction in particle size that occurred during dispersion in the Siwek chamber. The design of the outlet (dispersion) valve of the Siwek 20-L apparatus charge vessel was largely responsible for the particle break-up. The contribution to particle break-up by the dispersion nozzles and the high level of turbulence in the chamber were found to be minimal. This is a significant finding in that the dust particle size tested for explosibility in the Siwek chamber is considerably smaller than the original dust sample.