The ability of biological and organic synthetic materials to accumulate atmospheric particulates containing copper, lead, nickel and strontium

This work was aimed at finding materials that could be used as alternatives to lichens as air quality monitors since the high natural variability and the large amount of lichen collected are two drawbacks of the use of these organisms. Lichen Flavoparmelia caperata(L.) Hale was exposed in three different forms (transplant, detached from the substratum and as a biomass-ground and homogeneized) and compared to the planetree bark (Platanus hybrida Brot.), exposed as a biomass, and two organic synthetic materials (Chelex(R) 100 resin and cellulose acetate). Materials were exposed for two months in the winter, spring and summer, at three Portuguese coastal cities. The results showed that the airborne accumulations of Cu, Ni, Pb and Sr were partially dependent on the meteorological conditions but mainly dependent on the nature of the exposed material. The standard deviations of the synthetic materials or homogenized biomass were the same or greater than lichen transplants or detached. The accumulation by biological materials, of the four studied elements, was comparable to the lichen transplant accumulation. The replacement of the traditional transplants by the biomass was not considered advantageous, since their preparation is time-consuming. Therefore lichens remain the most suitable in biomonitoring studies. The exposure of detached lichen allows the accurate measurement of the exposed area/volume so it can be useful to relate atmospheric deposition rates with the lichen metal content. The synthetic materials accumulated Cu and Ni and should only be used as an alternative to traditional transplants when these are the elements of interest.     

Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modelling

Collection of municipal solid waste (MSW) may account for more than 70% of the total waste management budget, most of which is for fuel costs. It is therefore crucial to optimise the routing network used for waste collection and transportation. This paper proposes the use of geographical information systems (GIS) 3D route modelling software for waste collection and transportation, which adds one more degree of freedom to the system and allows driving routes to be optimised for minimum fuel consumption. The model takes into account the effects of road inclination and vehicle weight. It is applied to two different cases: routing waste collection vehicles in the city of Praia, the capital of Cape Verde, and routing the transport of waste from different municipalities of Santiago Island to an incineration plant. For the Praia city region, the 3D model that minimised fuel consumption yielded cost savings of 8% as compared with an approach that simply calculated the shortest 3D route. Remarkably, this was true despite the fact that the GIS-recommended fuel reduction route was actually 1.8% longer than the shortest possible travel distance. For the Santiago Island case, the difference was even more significant: a 12% fuel reduction for a similar total travel distance. These figures indicate the importance of considering both the relief of the terrain and fuel consumption in selecting a suitable cost function to optimise vehicle routing.     

Urban activity and mercury contamination in estuarine and marine sediments (Southern Brazil)

The distribution of mercury in sediments of the Patos Lagoon estuary and nearby coastal marine deposits has been investigated for the period 1998-2008. Polluted urban soils and coastal reclamation fills are the principal sources of high mercury concentrations for shallow estuarine sediments. The shallow sediments that form near the urban area enter the navigation canal and are transported into the ocean. The mercury concentration in sediments of the navigation canal has considerably increased since 2004, due to intense reconstruction activity in the urban area. Periodic dredging of the canal strengthens the preconditions for coastal marine sediment contamination by mercury. However, this does not occur because the resuspended dredged sediments are significantly diluted by natural suspended particulate matter.     

Artisanal fisheries of the Itaparica reservoir,São Francisco River,Brazil: socioeconomic profile,environmental dynamics,and management recommendations

Currently, artisanal fisheries in fresh water reservoirs have been losing ground to commercial fish farming and a great deal of fishery resources are being threatened by human interventions, such as reservoir management and increasing net-cage aquaculture. This study aims to understand the impacts of environmental changes on fishery resources and analyse the migratory fish breeding season as a missing link for fishery management in the semi-arid area of the São Francisco River Basin. Among the 870 fishermen operating in the Pernambuco part of the Itaparica Reservoir, 10% were interviewed and affirmed that fish stocks have been compromised due to the closed fishing period’s incoherence, exotic species insertion, and changes to the river flow caused by reservoir construction and operation. A significant correlation was observed between the Reproductive Activity Index (RAI) and precipitation (p?=?0.745) as well as between the RAI and the river’s flow (p?=??0.909). This shows how important it is to consider both the semi-arid climate setting and reservoir operation in determining the closed period which should safeguard fish reproduction. Monitoring the fish reproduction period and research on the reproductive biology of native fish species is needed in the São Francisco River Basin’s different stretches in order to guarantee valuable fish stocks and fisheries maintenance. Integrated action between the fish resource users, civil society, and federal bodies/agencies is essential in order to mitigate impacts and improve fish production systems, not only in Brazil, but in other regions experiencing a similar scenario.     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Recovery of PET from packaging plastics mixtures by wet shaking table

Recycling requires the separation of materials appearing in a mass of wastes of heterogeneous composition and characteristics, into single, almost pure, component/material flows. The separation of materials (e.g., some types of plastics) with similar physical properties (e.g., specific gravity) is often accomplished by human sorting. This is the case of the separation of packaging plastics in municipal solid wastes (MSW). The low cost of virgin plastics and low value of recycled plastics necessitate the utilization of low cost techniques and processes in the recycling of packaging plastics. An experimental study was conducted to evaluate the feasibility of production of a PET product, cleaned from PVC and PS, using a wet shaking table. The wet shaking table is an environmentally friendly process, widely used to separate minerals, which has low capital and operational costs. Some operational variables of the equipment, as well as different feed characteristics, were considered. The results show that the separation of these plastics is feasible although, similarly to the mineral field, in somewhat complex flow sheets.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia Usneoides (L.) in an industrialized area in Rio de Janeiro state, south east Brazil--Part I: PCDD and PCDF

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic Bromeliad species as biomonitor and measuring total deposition rates on funnels covered with polyurethane foams. Samples were collected during 78 days in V.R. and 95 days in PNI in winter (dry season, June-August 2003) and during 114 days in both areas in summer (rainy season, December 2003-February 2004). The PCDD/PCDF deposition rates ranged from 0.10 to 1.9 pg WHO-TEQ/(m2 day) in winter and from 0.11 to 2.2 pg WHO-TEQ/(m2 day) in summer. Deposition rates found in V.R. in summer were four- to ninefold higher than those measured in PNI, while in winter deposition rates in both regions were in the same range. Deposition rates in V.R. in summer were about five fold lower than those measured in 1996. PCDD/PCDF levels in biomonitor samples were between 0.95 and 14.6 ng WHO-TEQ/kg d.m. in winter and between 2.2 and 5.2 ng WHO-TEQ/kg d.m. in summer. In winter, concentrations found in V.R. were up to 11 times higher than those found in PNI, while in summer the levels measured in both areas were comparable. The homologue and isomer profiles found in the deposition as well as in the biomonitor samples from V.R. indicate that steel production is the main source of contamination in the region, whereas in PNI, the long range transport of these pollutants is the predominant contamination pathway.     

The environmental behaviour of polychlorinated phenols and its relevance to cork forest ecosystems: a review

Pentachlorophenol (PCP) has been used as a herbicide, biocide and preservative worldwide since the 1930s and as a result, extensive and prolonged contamination exists. The environmental impact increases when its many degradation products are taken into consideration. A number of chloroanisols and their related chlorophenols have been found in cork slabs collected from Portuguese oak tree forests before stopper manufacturing, and contamination by PCP and polychlorinated anisole (PCA) has been detected in Canadian forests. It is suggested that the use of polychlorinated phenols, in particular PCP, is thought to be a cause of the cork taint problem in wine, a major socio-economic impact not only for industry but on sensitive and highly biodiverse ecosystems. It also highlights particular issues relating to the regional regulation of potentially toxic chemicals and global economics world wide. To fully understand the impact of contamination sources, the mechanisms responsible for the fate and transport of PCP and its degradation products and assessment of their environmental behaviour is required. This review looks at the current state of knowledge of soil sorption, fate and bioavailability and identifies the challenges of degradation product identification and the contradictory evidence from field and laboratory observations. The need for a systematic evaluation of PCP contamination in relation to cork forest ecosystems and transfer of PCP between trophic levels is emphasised by discrepancies in bioaccumulation and toxicity. This is essential to enable long term management of not only transboundary contaminants, but also the sustainable management of socially and economically important forest ecosystems.     

Influence of the chemical structure on mobility of PCB congeners in female and male sardine (Sardina pilchardus) from Portuguese coast

Concentrations of 30 polychlorinated biphenyl congeners (CBs) were determined in muscle, liver and gonad tissues of female and male sardines (Sardina pilchardus) collected in February-May 2000 and September-January 2001 from purse seine vessels operating around Peniche, Portugal. The determined CBs were aggregated in four groups (I, II, III and IV), according to similarities of their chemical structures. Muscle and liver of males contained significantly higher concentrations of groups I and II than females during the final period of spawning (February-April). A less contrast was observed for the groups III and IV. This seasonal fluctuation associated with the spawning indicates that female sardines regulate the excess of CBs sequestrated during fatten period. On the contrary, levels of groups I and II were higher in males than in females indicating slower mobility of these compounds as lipids were consumed during the final period of spawning. The deficient regulation of those CBs in muscle of male sardines can not be attributed to selective transfer to gonads and subsequent excretion. Although the full explanation was not found for the different mobility of PCBs with the gender, the results provide evidence of slower elimination of group I and II congeners in male sardines.