Manganese concentrations in maternal–infant blood and birth weight

Manganese (Mn) is an essential mineral nutrient in mammals. The physiological role of Mn in animal models is well documented, but little is known about the adverse effects of Mn deficiency or overexposure in humans, including pregnancy outcomes such as birth weight. We examined the relationship of the maternal and cord blood Mn levels with birth weight in a cohort of 172 mother–infant pairs born in Shanghai, China. Non-linear spline and quadratic regression models were used to test the hypothesis of an inverted U-shaped association between the Mn levels and birth weight. The median (range) levels of Mn in the maternal and cord blood were 5.38 (2.34–30.37) μg/dL and 7.66 (2.57–34.23) μg/dL, respectively. An inverted U-shaped relationship was observed between maternal Mn and birth weight after adjusting for potential confounders. The birth weight increased with Mn levels up to 4.18 μg/dL, and a slight reduction in weight was observed at higher levels. The cord blood Mn levels were not found to be associated with birth weight. Both lower and higher Mn exposures are associated with lower birth weight, which may influence important developmental parameters; the association of higher Mn levels with lower weight was weak and imprecise.     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.     

Causes of decreased reference evapotranspiration and pan evaporation in the Jinghe River catchment, northern China

This study focused on the changes of reference evapotranspiration (ET₀) and pan evaporation (ET_pan) to study the impacts of climate change on the hydrological cycle in the Jinghe River catchment. Based on the Penman–Monteith equation, the ET₀ was calculated. The temporal trend and spatial distribution of ET₀ and E_pan measured with a 20-cm pan were examined at the 14 stations during 1957–2005. The effects of meteorological factors on the variation of ET₀ were determined by analyzing the trends in themselves with comparison between original climate and detrended climate scenarios and then their sensitivity to ET₀. Both the ET₀ and E_pan showed remarkable decreasing trends from 1957 to 2005 and their decreasing rate was 40.9 and 17.7 mm per 10 years, respectively. Trend analysis of meteorological factors exhibited that the reduction in ET₀ and ET_pan was principally caused by both significant decreases in wind speed and sunshine hours. Furthermore, the decreasing trend of ET₀ was mainly dominated by the significant decrease in wind speed with high sensitivity, to a less extent, by the decrease in net radiation. Although relative humidity is one of the most sensitive variables, its effect on ET₀ was negligible because of its temporal constancy. The contribution of wind speed reduction to decreased ET₀ has increased from 50 to 76.1%, but net radiation, by contrast, decreased from 50 to 23.9%.     

The removal of hydrogen sulfide in solution by ferric and alum water treatment residuals

This work investigated the characteristics and mechanisms of hydrogen sulfide adsorption by ferric and alum water treatment residuals (FARs) in solution. The results indicated that FARs had a high hydrogen sulfide adsorption capacity. pH 7 rather than higher pH (e.g. pH 8-10) was favorable for hydrogen sulfide removal. The Yan model fitted the breakthrough curves better than the Thomas model under varied pH values and concentrations. The Brunauer-Emmett-Teller surface area and the total pore volume of the FARs decreased after the adsorption of hydrogen sulfide. In particular, the volume of pores with a radius of 3-5 nm decreased, while the volume of pores with a radius of 2 nm increased. Therefore, it was inferred that new adsorption sites were generated during the adsorption process. The pH of the FARs increased greatly after adsorption. Moreover, differential scanning calorimetry analysis indicated that elemental sulfur was present in the FARs, while the derivative thermal gravimetry curves indicated the presence of sulfuric acid and sulfurous acid. These results indicated that both oxidization and ligand exchange contribute to the removal of hydrogen sulfide by FARs. Under anaerobic conditions, the maximum amount of hydrogen sulfide released was approximately 0.026 mg g(-1), which was less than 0.19% of the total amount adsorbed by the FARs. The hydrogen sulfide that was released may be re-adsorbed by the FARs and transformed into more stable mineral forms. Therefore, FARs are an excellent adsorbent for hydrogen sulfide.     

Heterogeneous photocatalytic degradation of methyl orange in schwertmannite/oxalate suspension under UV irradiation

Introduction

Schwertmannite was synthesized through an oxidation of FeSO₄ by Acidithiobacillus ferrooxidans LX5 cell suspension at an initial pH?2.5 and 28°C for 3?days and characterized using X-ray diffraction spectroscopy and scanning electron microscope. The schwertmannite photocatalytic degradation of methyl orange (MO) by oxalate was investigated at different initial pH values, concentrations of schwertmannite, oxalate, and MO.

Results

The results demonstrated that photodegradation of MO in the presence of schwertmannite or oxalate alone was very weak. However, the removal of MO was significantly enhanced when schwertmannite and oxalate coexisted in the reaction system. Low pH (4 or less) was beneficial to the degradation of MO. The optimal doses of schwertmannite and oxalate were 0.2?g?L^?1 and 2?mM, respectively. Hydroxyl radicals (·OH) and Fe(II), the intermediate products, were also examined during the reaction to explore their correlation with the degradation of MO.

Conclusion

A possible mechanism for the photocatalytic decomposition of MO in the study was proposed. The formation of Fe(III)-oxalate complexes on the surface of schwertmannite was a precursor of H₂O₂ and Fe(II) production, further leading to the yield of ·OH responsible for the decomposition of MO.     

低碳理念在工业园区规划环评中的应用低碳理念在工业园区规划环评中的应用

工业园区是温室气体排放的重要源头之一,工业园区规划环评应在规划的基础上,探讨如何在评价过程中通过制定合理的对策措施,促进园区低碳发展。本文分析了低碳发展理念纳入工业园区规划环评的工作重点,建议规划环评完善评价内容,在原有评价体系中融入园区温室气体排放特征、设定低碳发展评价指标、优化设计能源结构、构建低碳产业体系、低碳发展替代方案以及碳排放跟踪评价等内容,以达到规划环评指导工业园区按低碳路径发展的目的。     

The acute effects of fine particles on respiratory mortality and morbidity in Beijing, 2004–2009

Recent epidemiological and toxicological studies have shown associations between particulate matter and human health. However, the estimates of adverse health effects are inconsistent across many countries and areas. The stratification and interaction models were employed within the context of the generalized additive Poisson regression equation to examine the acute effects of fine particles on respiratory health and to explore the possible joint modification of temperature, humidity, and season in Beijing, China, for the period 2004–2009. The results revealed that the respiratory health damage threshold of the PM_2.5 concentration was mainly within the range of 20–60 μg/m³, and the adverse effect of excessively high PM_2.5 concentration maintained a stable level. In the most serious case, an increase of 10 μg/m³ PM_2.5 results in an elevation of 4.60 % (95 % CI 3.84–4.60 %) and 4.48 % (95 % CI 3.53–5.41 %) with a lag of 3 days, values far higher than the average level of 0.69 % (95 % CI 0.54–0.85 %) and 1.32 % (95 % CI 1.02–1.61 %) for respiratory mortality and morbidity, respectively. There were strong seasonal patterns of adverse effects with the seasonal variation of temperature and humidity. The growth rates of respiratory mortality and morbidity were highest in winter. And, they increased 1.4 and 1.8 times in winter, greater than in the full year as PM_2.5 increased 10 μg/m³.     

Using biochar for remediation of soils contaminated with heavy metals and organic pollutants

Soil contamination with heavy metals and organic pollutants has increasingly become a serious global environmental issue in recent years. Considerable efforts have been made to remediate contaminated soils. Biochar has a large surface area, and high capacity to adsorb heavy metals and organic pollutants. Biochar can potentially be used to reduce the bioavailability and leachability of heavy metals and organic pollutants in soils through adsorption and other physicochemical reactions. Biochar is typically an alkaline material which can increase soil pH and contribute to stabilization of heavy metals. Application of biochar for remediation of contaminated soils may provide a new solution to the soil pollution problem. This paper provides an overview on the impact of biochar on the environmental fate and mobility of heavy metals and organic pollutants in contaminated soils and its implication for remediation of contaminated soils. Further research directions are identified to ensure a safe and sustainable use of biochar as a soil amendment for remediation of contaminated soils.     

Effects of light, microbial activity, and sediment resuspension on the phosphorus immobilization capability of drinking water treatment residuals in lake sediment

Drinking water treatment residuals (WTRs), nonhazardous by-products generated in a drinking water treatment plant, can be reused to immobilize phosphorus (P) to control the internal P loading from lake sediments for eutrophication control. Reasonably, before practical application, it is essential to determine the P immobilization capability of WTRs in lake sediments under various conditions. In this work, laboratory scale experiments were conducted to investigate the effects of light, microbial activity, and sediment resuspension on the P immobilization capability of WTRs. The results suggested that absence of light, low microbial activity, and sediment resuspension can increase the internal P loading from lake sediments. WTRs can, however, reduce the internal P loading significantly. Further analysis demonstrated that WTRs can stabilize P, decreasing the P bioavailability in the sediments under varied conditions. WTRs also presented little undesirable effects on the dissolved oxygen levels and pH of overlying water. Therefore, light, microbial activity, and sediment resuspension have little effect on the P immobilization capability of WTRs in lake sediments.     

pH对活化前后废弃铁铝泥吸附不同种磷动力学的影响

实验研究了300℃热活化前后的给水厂废弃铁铝泥（R-FARs和H300-FARs）对正磷酸盐、聚磷酸盐和有机磷酸盐的吸附动力学特性,并考察pH对不同磷吸附动力学的影响。结果表明,pH对不同磷吸附动力学过程的影响趋势相似,即低pH有利于吸附。准二级动力学模型能够更真实地反映不同磷在R-FARs和H300-FARs的吸附动力学行为,由拟合结果可知焦磷酸盐和六肌醇磷酸盐的初始吸附速率相对较大,而甘油磷酸盐最小;且活化作用明显提高了不同磷的初始吸附速率,并减弱了pH对初始吸附速率的影响。不同磷的吸附速率受到液膜扩散、颗粒内扩散和吸附反应三者共同控制,其中吸附反应是主要的控制步骤。