Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 1. Stabilization performance of a continuous-flow reactor at low residence time.

There is increasing interest in the United States in producing biosolids from municipal wastewater treatment that meet the criteria for Class A designation established by the U.S. Environmental Protection Agency. Class A biosolids are intended to be free of pathogens and also must meet requirements for reduction of the vector-attraction potential associated with untreated sludge. High-temperature processes are considered to produce Class A biosolids if the combination of operating temperature and treatment time exceeds minimum criteria, but this option is not applicable to mixed, continuous-flow reactors. Such reactors, or any combination of reactors that does not meet the holding time requirement at a specific temperature, must be demonstrated to inactivate pathogens to levels consistent with the Class A criteria. This study was designed to evaluate pathogen inactivation by thermophilic anaerobic digestion in a mixed, continuous-flow reactor followed by batch or plug-flow treatment. In this first of a two-part series, we describe the performance of a continuous-flow laboratory reactor with respect to physical and chemical operating parameters; microbial inactivation in the combined continuous-flow and batch treatment system is described in the second part. Sludges from three different sources were treated at 53 degrees C, while sludge from one of the sources was also treated at 55 and 51 degrees C. Relatively short hydraulic retention times (four to six days) were used to represent a conservative operating condition with respect to pathogen inactivation. Treatment of a fermented primary sludge led to an average volatile-solids (VS) destruction efficiency of 45%, while VS destruction for the other two sources was near or below 38%, the Class A criterion for vector attraction reduction. Consistent with other studies on thermophilic anaerobic digestion of sludges at short residence times, effluent concentrations of volatile fatty acids (VFAs) were relatively high. Also consistent with other studies, the most abundant VFA in the effluent was propionate. Gas production ranged from 0.3 to 0.5 m3/kg VS fed and from 0.8 to 1.3 m3/kg VS destroyed.     

Assessing plausible rates of population growth in humpback whales from life-history data

The rate of growth of any population is a quantity of interest in conservation and management and is constrained by biological factors. In this study, recent data on life-history parameters influencing rates of population growth in humpback whales, including survival, age at first parturition and calving rate are reviewed. Monte Carlo simulations are used to compute a distribution of rates of increase (ROIs) taking into account uncertainty in biological parameter estimates. Two approaches for computing juvenile survival are proposed, which taken into account along with other life-history data, resulted in the following estimates of the rate of population growth: Approach A: mean of 7.3%/year (95% CI = 3.5–10.5%/year) and Approach B: mean of 8.6%/year (95% CI = 5.0–11.4%/year). It is proposed that the upper 99% quantile of the resulting distribution of the ROI for Approach B (11.8%/year) be established as the maximum plausible ROI for humpback whales and be used in population assessment of the species. Possible sources of positive and negative biases in the present estimates are presented and include measurement error in estimation of life-history parameters, changes in the environment within the period these quantities are measured, density dependence or other natural factors. However, it is difficult to evaluate potential biases without additional data. The methods presented in this study can be applied to other species for which life-history parameters are available and are useful in assessing plausibility in the estimation of population growth rates from time series of abundance estimates.     

Sex-specific fitness consequences of dispersal in Siberian jays

In most birds, natal dispersal is female-biased, but the selective pressures leading to this pattern have rarely been explored with comprehensive data on lifetime reproductive success. In territorial birds, the benefit of philopatry should be higher for males than for females when males establish territories for which knowledge about the local environment is important. As females may use male characteristics for mate choice, and hence indirectly for territory choice, the benefit from the direct knowledge of the local environment may be lower for females than males. We tested this hypothesis using data from a long-term study of group living corvids, the Siberian jays (Perisoreus infaustus). In this species, the socially dominant offspring delay dispersal while the sub-dominant offspring leave the family group directly after reaching independence. Our results show that natal dispersal distance (a proxy for local knowledge) was related to sex and dispersal timing (a proxy for “quality”): Females and early dispersers traveled further on average than males and delayed dispersers. Furthermore, dispersal distance and timing were negatively related to the number of recruits produced over an individual’s lifetime in males, but not in females. Hence, the results support the hypothesis that the female-biased natal dispersal found in this and other bird species may come about through higher lifetime reproductive success of philopatric males than females.     

Response of “Alamo” switchgrass tissue chemistry and biomass to nitrogen fertilization in West Tennessee,USA

Switchgrass (Panicum virgatum) is a perennial, warm-season grass that has been identified as a potential biofuel feedstock over a large part of North America. We examined above- and belowground responses to nitrogen fertilization in “Alamo” switchgrass grown in West Tennessee, USA. The fertilizer study included a spring and fall sampling of 5-year old switchgrass grown under annual applications of 0, 67, and 202 kg N ha^?1 (as ammonium nitrate). Fertilization changed switchgrass biomass allocation as indicated by root:shoot ratios. End-of-growing season root:shoot ratios (mean ± SE) declined significantly (P ≤ 0.05) at the highest fertilizer nitrogen treatment (2.16 ± 0.08, 2.02 ± 0.18, and 0.88 ± 0.14, respectively, at 0, 67, and 202 kg N ha^?1). Fertilization also significantly increased above- and belowground nitrogen concentrations and decreased plant C:N ratios. Data are presented for coarse live roots, fine live roots, coarse dead roots, fine dead roots, and rhizomes. At the end of the growing season, there was more carbon and nitrogen stored in belowground biomass than aboveground biomass. Fertilization impacted switchgrass tissue chemistry and biomass allocation in ways that potentially impact soil carbon cycle processes and soil carbon storage.     

Spatial elements of mortality risk in old-growth forests

For many species of long-lived organisms, such as trees, survival appears to be the most critical vital rate affecting population persistence. However, methods commonly used to quantify tree death, such as relating tree mortality risk solely to diameter growth, almost certainly do not account for important spatial processes. Our goal in this study was to detect and, if present, to quantify the relevance of such processes. For this purpose, we examined purely spatial aspects of mortality for four species, Abies concolor, Abies magnifica, Calocedrus decurrens, and Pinus lambertiana, in an old-growth conifer forest in the Sierra Nevada of California, USA. The analysis was performed using data from nine fully mapped long-term monitoring plots. In three cases, the results unequivocally supported the inclusion of spatial information in models used to predict mortality. For Abies concolor, our results suggested that growth rate may not always adequately capture increased mortality risk due to competition. We also found evidence of a facilitative effect for this species, with mortality risk decreasing with proximity to conspecific neighbors. For Pinus lambertiana, mortality risk increased with density of conspecific neighbors, in keeping with a mechanism of increased pathogen or insect pressure (i.e., a Janzen-Connell type effect). Finally, we found that models estimating risk of being crushed were strongly improved by the inclusion of a simple index of spatial proximity. Not only did spatial indices improve models, those improvements were relevant for mortality prediction. For P. lambertiana, spatial factors were important for estimation of mortality risk regardless of growth rate. For A. concolor, although most of the population fell within spatial conditions in which mortality risk was well described by growth, trees that died occurred outside those conditions in a disproportionate fashion. Furthermore, as stands of A. concolor become increasingly dense, such spatial factors are likely to become increasingly important. In general, models that fail to account for spatial pattern are at risk of failure as conditions change.     

Dams in the Amazon: Belo Monte and Brazil’s Hydroelectric Development of the Xingu River Basin

Hydroelectric dams represent major investments and major sources of environmental and social impacts. Powerful forces surround the decision-making process on public investments in the various options for the generation and conservation of electricity. Brazil’s proposed Belo Monte Dam (formerly Kararaô) and its upstream counterpart, the Altamira Dam (better known by its former name of Babaquara) are at the center of controversies on the decision-making process for major infrastructure projects in Amazonia. The Belo Monte Dam by itself would have a small reservoir area (440 km²) and large installed capacity (11, 181.3 MW), but the Altamira/Babaquara Dam that would regulate the flow of the Xingu River (thereby increasing power generation at Belo Monte) would flood a vast area (6140 km²). The great impact of dams provides a powerful reason for Brazil to reassess its current policies that allocate large amounts of energy in the country’s national grid to subsidized aluminum smelting for export. The case of Belo Monte and the five additional dams planned upstream (including the Altamira/Babaquara Dam) indicate the need for Brazil to reform its environmental assessment and licensing system to include the impacts of multiple interdependent projects.     

Indonesia’s Accidental Island: Composing the Environment in the Echo of Disaster

By presenting stakeholders’ competing representations of an extraordinary geological formation, an island with a surface that is comprised of runoff from an infamous mud volcano in East Java, this article explores the communicative openings and closures that arise during an environmental disaster. A particular concern is attuning communicative practices to the diverse human and nonhuman actors that not only produce disasters but also shape our understandings and responses to disasters. Drawing on the work of Bruno Latour, this article suggests that non-anthropocentric modes of inquiry present new communicative and political possibilities for pursuing both social justice and safe environments. While this article focuses on a specific set of incidents in Indonesia, this project develops tools and perspectives that can be applied to environmental conflicts at other places.     

Some observations on copper yields and ore grades

The paper examines trends in the average copper content of mined ores over the years. It has tended to decline over the long term, but by no means evenly. US averages are not typical of global averages, at least in the past four decades. Those have been both higher, and less volatile than in the US. One reason for falling averages is a change in the type of deposit mined, with a rise in the share of relatively low grade porphyry deposits. The different nature of their deposits is reflected in marked differences in grades between the different continents. African and Australian average grades are higher than the global average, and changes in the share of Central Africa in global output have affected the global average grade. Yields are have been consistently lower in North America than elsewhere, and Latin American average grades have trended downwards, reflecting both the ageing of mines and the rising share of production from porphyry deposits. Typically the yield of mines declines over time as mining proceeds. The average copper content of ore deposits is usually below the average yield of the ore accessed in the early years of production. The initial grades of new mines have not declined over the past forty years, and there has been no perceptible tendency for the average grade of porphyry deposits brought into production to decline over time. There is no apparent correlation between average grade and deposit size, but mine operators tend to exploit economies of scale to offset low grades. The relationship between the annual percentage yields (the head grade) and the reserve grades of deposits is not static. In recent years head grades have fallen closer to reserve grades. The relationship may be affected by movements in metal prices. Although the evidence about the influence of prices is not clear-cut, it does suggest that prices and cut-off grades may be inversely related. As many ores contain other valuable metals besides copper, copper yields will sometimes be subordinated to the extraction of these other metals. Copper equivalent grades have not moved in the same way as copper grades alone.     

Comparison of the Performance of Statistical Models in Forecasting Monthly Total Dissolved Solids in the Rio Grande1

Abudu, S., J.P. King, Z. Sheng, 2011. Comparison of the Performance of Statistical Models in Forecasting Monthly Total Dissolved Solids in the Rio Grande. Journal of the American Water Resources Association (JAWRA) 48(1): 10‐23. DOI: 10.1111/j.1752‐1688.2011.00587.x Abstract: This paper presents the application of autoregressive integrated moving average (ARIMA), transfer function‐noise (TFN), and artificial neural networks (ANNs) modeling approaches in forecasting monthly total dissolved solids (TDS) of water in the Rio Grande at El Paso, Texas. Predictability analysis was performed between the precipitation, temperature, streamflow rates at the site, releases from upstream reservoirs, and monthly TDS using cross‐correlation statistical tests. The chi‐square test results indicated that the average monthly temperature and precipitation did not show significant predictability on monthly TDS series. The performances of one‐ to three‐month‐ahead model forecasts for the testing period of 1984‐1994 showed that the TFN model that incorporated the streamflow rates at the site and Caballo Reservoir release improved monthly TDS forecasts slightly better than the ARIMA models. Except for one‐month‐ahead forecasts, the ANN models using the streamflow rates at the site as inputs resulted in no significant improvements over the TFN models at two‐month‐ahead and three‐month‐ahead forecasts. For three‐month‐ahead forecasts, the simple ARIMA showed similar performance compared to all other models. The results of this study suggested that simple deseasonalized ARIMA models could be used in one‐ to three‐month‐ahead TDS forecasting at the study site with a simple, explicit model structure and similar model performance as the TFN and ANN models for better water management in the Basin.     

Factors diminishing the effectiveness of phosphorus loading from municipal effluent: critical information for TMDL analyses

Factors that diminish the effectiveness of phosphorus inputs from a municipal wastewater treatment facility (Metro) in contributing to phosphorus levels and its availability to support algae growth in a culturally eutrophic urban lake (Onondaga Lake, NY) were characterized and quantified. These factors included the bioavailability and settling characteristics of particulate phosphorus from this effluent, the dominant form (70%) of phosphorus in this input, and the plunging of the discharge to stratified layers in the lake. Supporting studies included: (1) chemical and morphometric characterization of the phosphorus-enriched particles of this effluent, compared to particle populations of the tributaries and lake, with an individual particle analysis technique; (2) conduct of algal bioavailability assays of the particulate phosphorus of the effluent; (3) conduct of multiple size class settling velocity measurements on effluent particles; and (4) determinations of the propensity of the discharge to plunge, and documentation of plunging through three-dimensional monitoring of a tracer adjoining the outfall. All of these diminishing effects were found to be operative for the Metro effluent in Onondaga Lake and will be integrated into a forthcoming phosphorus "total maximum daily load" analysis for the lake, through appropriate representation in a supporting mechanistic water quality model. The particulate phosphorus in the effluent was associated entirely with Fe-rich particles formed in the phosphorus treatment process. These particles did not contribute to concentrations in pelagic portions of the lake, due to local deposition associated with their large size. Moreover, this particulate phosphorus was found to be nearly entirely unavailable to support algae growth. While substantial differences are to be expected for various inputs, the effective loading concept and the approaches adopted here to assess the diminishing factors are broadly applicable.