Occurrence and distribution of polycyclic aromatic carbons in sludges from wastewater treatment plants in Guangdong, China

In this study, the occurrence and distribution of polycyclic aromatic hydrocarbons (PAHs) were investigated in six sludge samples collected from Guangdong Province, China. Concentrations of PAHs varying from 2,534.1 to 6,926.6 μg kg^???1 (dry sludge) were observed in three municipal wastewater treatment plants with phenanthrene (Phe), fluoranthene, and pyrene being the main compounds. In addition, 682.6 μg kg^???1 PAHs were detected in one sludge sample from a food processing plant, with fluorene, Phe, and chrysene being the main components. No PAHs were detected in sludge samples obtained from two cosmetic plants. The levels and distributional characteristics of PAHs, polychlorinated biphenyls (PCBs), and polycyclic musks (PMs) from the samples were also compared. The results of this comparison indicated that petrochemical refineries and road traffic played important roles in the PAH loads in sludge, while PMs primarily originated from domestic wastewater and industrial wastewater from cosmetic plants. Finally, the presence of 98.8 μg kg^???1 PCBs in sludge suggested diffusional emission sources from electrical components containing PCBs.     

Chlorinated and brominated dibenzo-p-dioxins and dibenzofurans in surface sediment from Taihu Lake, China

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in surface sediment samples from Taihu Lake--an important water supply of the Yangtze River Delta, China--were investigated in the present study. Concentrations of PCDD/Fs ranged from 0.91 to 4.8 pg TEQ g(-1) dw (mean: 2.9 pg TEQ g(-1) dw, TEQ: Toxic Equivalent), which were all higher than the threshold effect level established by interim sediment quality guidelines in Canada (0.85 pg TEQ g(-1) dw). The levels of PBDD/Fs ranged from 0.16 to 1.6 pg TEQ g(-1) dw (mean: 0.52 pg TEQ g(-1) dw) and accounted for 5-33% (mean: 14%) of the total PCDD/Fs and PBDD/Fs TEQ. Comparatively, the abundance of sedimentary PCDD/Fs in the three regions (Meiliang Bay, Gonghu Bay, and Xukou Bay) showed a decreasing trend from the inflow region to the outflow region, while no significant difference was observed among their 2,3,7,8-PBDD/Fs levels, which suggested that the sources of PCDD/Fs and PBDD/Fs differed in this area. Principal component analysis suggested that the historical production/usage of pentachlorophenol and sodium pentachlorophenate was the dominant source of PCDD/Fs in the sediment of these regions. Although the specific sources of PBDD/Fs in the sediment of Taihu Lake were unclear, it was suspected to be due to atmospheric deposition; however, an additional study is needed to confirm this.     

环境空气中汞的直接测定方法研究与应用

研究了环境空气中汞浓度的直接测定方法。利用金汞齐富集－便携式测汞仪对环境空气中的汞进行直接测定,具有简便、快捷、不使用化学试剂的优点。经测试,该方法在0～180 ng／m^3范围内具有良好的线性关系,最低检出浓度为5 ng／m^3。     

Characteristics of atmospheric carbonyls and VOCs in Forest Park in South China

The diurnal variation of atmospheric carbonyls and VOCs in a forest in south China were studied in summer 2004. Twenty kinds of carbonyls and eight kinds of VOCs were identified and quantified. Formaldehyde and acetaldehyde were the two most abundant carbonyls, while the most abundant VOCs were isoprene, followed by o-xylene. Most C₃-C₁₀ carbonyls had higher concentrations from 09:00 to 15:00, and their levels were lower during night-time and often reached the lowest in early morning. Formaldehyde and acetaldehyde, however, showed two high levels in their diurnal patterns partly due to their different sources and sinks. The VOCs had different diurnal patterns compared to most carbonyls. The highest concentrations were observed from 03:00 to 06:00 for 1-butene, from 06:00 to 12:00 for isoprene, and from 12:00 to 15:00 for α-pinene. The highest levels for aromatic hydrocarbons occurred during midnight and the lowest in late afternoon. According to the study, emissions from vegetation and photo-oxidation of gas-phase hydrocarbons were the main sources for some carbonyls and VOCs in this region. Other compounds, such as formaldehyde, acetaldehyde and BTEX, showed anthropogenic sources.     

Even sampling designs generation by charges repulsion simulation

Evenly distributed sampling design is generally considered as an efficient sampling design. It is widely used in sampling for the environmental survey. In this paper, we present a novel method for generating N evenly distributed samples within a given irregular polygon via simulating the movements of some ideal homogeneous point charges. Initially, charges are randomly put into the sampling region; then, they are freed and held orderly; and after enough runs, the charges will finally reach a stable state with all of them having a zero resultant force and velocity; and so they distribute evenly within the region. Their layout can thus be considered as an evenly distributed sampling design. The main advantages of this method are: (1) it is easy to understand and implement; (2) it is efficient in both running and generating better designs. Analysis and experimental results indicate that this method is an efficient and robust method for generating even sampling designs for 2D polygonal sampling region.     

Characteristic, composition, and sources of TSP investigated by HRTEM/EDS and ESEM/EDS

Total suspended particle (TSP) collected at the fifth floor of House Dust in Hunan University, China, was analyzed in terms of microscopic morphology and chemical composition. The fine particles (50?nm-2?μm) in the TSP were analyzed by a high-resolution transmission electron microscope equipped with an energy-dispersive X-ray analyzer (HRTEM/EDS). Results showed that the particles were in shapes of plate, irregular and agglomerate. Based on EDS results, these fine particulate matter was primarily composed of Fe-rich (35.82-61.29%), Ca-rich (30.18-36.77%) and Si-rich (18.95-32.28%) particles. Other elements mainly including Mg (0.47-4.97%), Al (0.45-14.57%), S (0.45-4.73%), K (1.13-2.13%) and Zn (0.67-3.85%) were also observed. The sources analysis indicated that the HRTEM particles mainly originated from coal combustion, traffic emission, vehicles exhaust emission and fugitive soil or cement particulate matter. The coarse particles (4-50?μm) were detected by environmental scanning electron microscopy coupled with energy-dispersive X-ray detector (ESEM/EDS). Based on a simple algorithm, ESEM particles were categorized into five groups: C-bearing (46.15%, 67% and 86.98%), Si + Ca-bearing (21.48?+?11.80%, 16.51?+?10.81% and 16.32?+?10.62%), Si + Al-bearing (20.06?+?12.40%, 20.16?+?11.22% and 15.31?+?11.25%), Si-bearing (34.40%, 26.92% and 27.15%) particles and aggregates, most of which exhibit obvious crystalline structure, and these ESEM particles mainly derived from vehicles exhaust emission, coal combustion, soil, and biomass burning, while the aggregates are indicative of atmospheric reaction progress. HRTEM/EDS and ESEM/EDS are mutual complementary in analyzing the characteristic and determining the sources of TSP.     

Sensitivity of isolated eggs of pond snails: a new method for toxicity assays and risk assessment

The concentration of heavy metals in the environment is normally low. We here address whether using the development of isolated pond snail Radix auricularia eggs would provide a more sensitive endpoint and whether the gelatinous matrix of the egg mass surrounding the eggs indeed protects the snail embryos. In the present study, artificial removal of the gelatinous matrix of egg masses greatly increased the sensitivity of developing eggs to a heavy metal (cadmium). The sensitivity of isolated eggs to cadmium was determined using several convenient endpoints, including mortality, hatching rate, and heart rate, with an acute toxicity test and a subchronic test. In the acute toxicity test, a 96-h LC₅₀ value of 58.26 μg/L cadmium was determined. In the subchronic toxicity test, sublethal effects in terms of a significant reduction in hatching rate could be found in the 25-μg/L treatment, and a significant decrease of heart rate was observed in both treatments (5 and 25 μg/L). The high sensitivity of isolated eggs indicates that such tests can be efficient for toxicity assays and risk assessment, although one needs to keep in mind that the ecologically relevant measure of toxicity will be how eggs are affected when they are still inside the egg mass.     

Nitrogen enrichment in runoff sediments as affected by soil texture in Beijing mountain area

Enrichment ratio (ER) is widely used in nonpoint source pollution models to estimate the nutrient loss associated with soil erosion. The objective of this study was to determine the ER of total nitrogen (ER_N) in the sediments eroded from the typical soils with varying soil textures in Beijing mountain area. Each of the four soils was packed into a 40 by 30 by 15 cm soil pan and received 40-min simulated rainfalls at the intensity of 90 mm h^?1 on five slopes. ER_N for most sediments were above unity, indicating the common occurrence of nitrogen enrichment accompanied with soil erosion in Beijing mountain area. Soil texture was not the only factor that influenced N enrichment in this experiment since the ER_N for the two fine-textured soils were not always lower. Soil properties such as soil structure might exert a more important influence in some circumstances. The selective erosion of clay particles was the main reason for N enrichment, as implied by the significant positive correlation between the ER of total nitrogen and clay fraction in eroded sediments. Significant regression equations between ER_N and sediment yield were obtained for two pairs of soils, which were artificially categorized by soil texture. The one for fine-textured soils had greater intercept and more negative slope. Thus, the initially higher ER_N would be lower than that for the other two soils with coarser texture once the sediment yield exceeded 629 kg ha^?1.     

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

A bibliometric analysis of solid waste research during the period 1993–2008

This study is a bibliometric analysis of solid waste research to evaluate the current trends, using the literature in the Science Citation Index (SCI) database from 1993 to 2008. Analyzed aspects included document type, language, and publication output as well as distribution of journals, subject category, countries, institutes, title-words, author keywords, and ‘Keywords Plus’. An evaluating indicator, h-index, was applied to characterize the solid waste publications. The trend of publication outputs during 1993–2008 coincided with a power and an exponential model. Based on the exponential model during 2001–2008, the number of articles on solid waste in 2013 is predicted to be twice that in 2008. The most common subject category is environmental science and the most productive journal is Waste Management. The USA with most publications and China with the highest growth rate were compared. Finally, author keywords, words in title, and ‘Keywords Plus’ were analyzed to provide research emphasis. The results showed that mainstream research was centered on the following methods: recycling, landfilling, composting and waste-to-energy. Heavy metals, fly ash and sewage sludge were considered recent research hotspots.