The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

Nitrogen enrichment in runoff sediments as affected by soil texture in Beijing mountain area

Enrichment ratio (ER) is widely used in nonpoint source pollution models to estimate the nutrient loss associated with soil erosion. The objective of this study was to determine the ER of total nitrogen (ER_N) in the sediments eroded from the typical soils with varying soil textures in Beijing mountain area. Each of the four soils was packed into a 40 by 30 by 15 cm soil pan and received 40-min simulated rainfalls at the intensity of 90 mm h^?1 on five slopes. ER_N for most sediments were above unity, indicating the common occurrence of nitrogen enrichment accompanied with soil erosion in Beijing mountain area. Soil texture was not the only factor that influenced N enrichment in this experiment since the ER_N for the two fine-textured soils were not always lower. Soil properties such as soil structure might exert a more important influence in some circumstances. The selective erosion of clay particles was the main reason for N enrichment, as implied by the significant positive correlation between the ER of total nitrogen and clay fraction in eroded sediments. Significant regression equations between ER_N and sediment yield were obtained for two pairs of soils, which were artificially categorized by soil texture. The one for fine-textured soils had greater intercept and more negative slope. Thus, the initially higher ER_N would be lower than that for the other two soils with coarser texture once the sediment yield exceeded 629 kg ha^?1.     

Chlorinated and brominated dibenzo-p-dioxins and dibenzofurans in surface sediment from Taihu Lake, China

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in surface sediment samples from Taihu Lake--an important water supply of the Yangtze River Delta, China--were investigated in the present study. Concentrations of PCDD/Fs ranged from 0.91 to 4.8 pg TEQ g(-1) dw (mean: 2.9 pg TEQ g(-1) dw, TEQ: Toxic Equivalent), which were all higher than the threshold effect level established by interim sediment quality guidelines in Canada (0.85 pg TEQ g(-1) dw). The levels of PBDD/Fs ranged from 0.16 to 1.6 pg TEQ g(-1) dw (mean: 0.52 pg TEQ g(-1) dw) and accounted for 5-33% (mean: 14%) of the total PCDD/Fs and PBDD/Fs TEQ. Comparatively, the abundance of sedimentary PCDD/Fs in the three regions (Meiliang Bay, Gonghu Bay, and Xukou Bay) showed a decreasing trend from the inflow region to the outflow region, while no significant difference was observed among their 2,3,7,8-PBDD/Fs levels, which suggested that the sources of PCDD/Fs and PBDD/Fs differed in this area. Principal component analysis suggested that the historical production/usage of pentachlorophenol and sodium pentachlorophenate was the dominant source of PCDD/Fs in the sediment of these regions. Although the specific sources of PBDD/Fs in the sediment of Taihu Lake were unclear, it was suspected to be due to atmospheric deposition; however, an additional study is needed to confirm this.     

Characteristic, composition, and sources of TSP investigated by HRTEM/EDS and ESEM/EDS

Total suspended particle (TSP) collected at the fifth floor of House Dust in Hunan University, China, was analyzed in terms of microscopic morphology and chemical composition. The fine particles (50?nm-2?μm) in the TSP were analyzed by a high-resolution transmission electron microscope equipped with an energy-dispersive X-ray analyzer (HRTEM/EDS). Results showed that the particles were in shapes of plate, irregular and agglomerate. Based on EDS results, these fine particulate matter was primarily composed of Fe-rich (35.82-61.29%), Ca-rich (30.18-36.77%) and Si-rich (18.95-32.28%) particles. Other elements mainly including Mg (0.47-4.97%), Al (0.45-14.57%), S (0.45-4.73%), K (1.13-2.13%) and Zn (0.67-3.85%) were also observed. The sources analysis indicated that the HRTEM particles mainly originated from coal combustion, traffic emission, vehicles exhaust emission and fugitive soil or cement particulate matter. The coarse particles (4-50?μm) were detected by environmental scanning electron microscopy coupled with energy-dispersive X-ray detector (ESEM/EDS). Based on a simple algorithm, ESEM particles were categorized into five groups: C-bearing (46.15%, 67% and 86.98%), Si + Ca-bearing (21.48?+?11.80%, 16.51?+?10.81% and 16.32?+?10.62%), Si + Al-bearing (20.06?+?12.40%, 20.16?+?11.22% and 15.31?+?11.25%), Si-bearing (34.40%, 26.92% and 27.15%) particles and aggregates, most of which exhibit obvious crystalline structure, and these ESEM particles mainly derived from vehicles exhaust emission, coal combustion, soil, and biomass burning, while the aggregates are indicative of atmospheric reaction progress. HRTEM/EDS and ESEM/EDS are mutual complementary in analyzing the characteristic and determining the sources of TSP.     

Sensitivity of isolated eggs of pond snails: a new method for toxicity assays and risk assessment

The concentration of heavy metals in the environment is normally low. We here address whether using the development of isolated pond snail Radix auricularia eggs would provide a more sensitive endpoint and whether the gelatinous matrix of the egg mass surrounding the eggs indeed protects the snail embryos. In the present study, artificial removal of the gelatinous matrix of egg masses greatly increased the sensitivity of developing eggs to a heavy metal (cadmium). The sensitivity of isolated eggs to cadmium was determined using several convenient endpoints, including mortality, hatching rate, and heart rate, with an acute toxicity test and a subchronic test. In the acute toxicity test, a 96-h LC₅₀ value of 58.26 μg/L cadmium was determined. In the subchronic toxicity test, sublethal effects in terms of a significant reduction in hatching rate could be found in the 25-μg/L treatment, and a significant decrease of heart rate was observed in both treatments (5 and 25 μg/L). The high sensitivity of isolated eggs indicates that such tests can be efficient for toxicity assays and risk assessment, although one needs to keep in mind that the ecologically relevant measure of toxicity will be how eggs are affected when they are still inside the egg mass.     

环境空气中汞的直接测定方法研究与应用

研究了环境空气中汞浓度的直接测定方法。利用金汞齐富集－便携式测汞仪对环境空气中的汞进行直接测定,具有简便、快捷、不使用化学试剂的优点。经测试,该方法在0～180 ng／m^3范围内具有良好的线性关系,最低检出浓度为5 ng／m^3。     

Even sampling designs generation by charges repulsion simulation

Evenly distributed sampling design is generally considered as an efficient sampling design. It is widely used in sampling for the environmental survey. In this paper, we present a novel method for generating N evenly distributed samples within a given irregular polygon via simulating the movements of some ideal homogeneous point charges. Initially, charges are randomly put into the sampling region; then, they are freed and held orderly; and after enough runs, the charges will finally reach a stable state with all of them having a zero resultant force and velocity; and so they distribute evenly within the region. Their layout can thus be considered as an evenly distributed sampling design. The main advantages of this method are: (1) it is easy to understand and implement; (2) it is efficient in both running and generating better designs. Analysis and experimental results indicate that this method is an efficient and robust method for generating even sampling designs for 2D polygonal sampling region.     

The fungicide difenoconazole alters mRNA expression levels of human CYP3A4 in HepG2 cells

The fungicide difenoconazole has been frequently detected in agricultural products, soils and surface waters, causing increasingly public concern due to toxicological properties. Although systemic triazole fungicides can inhibit the enzymatic activity of many CYP450 isozymes, how difenoconazole affects the human CYP3A4 still remains largely unknown. We thus investigated the effect of difenoconazole on normal mRNA expression and protein expression of human CYP3A4 by real-time quantitative PCR and western blot, respectively. Results show that the exposure to difenoconazole from 0.01 to 0.5 μM for 24 h down-regulates mRNA expression levels of human CYP3A4 in HepG2 cells. We also found that difenoconazole could inhibit the enzymatic activity of human CYP3A4 in a concentration-dependent mode. The IC₅₀ of difenoconazole for inhibition of CYP3A4 activity is 0.41 µM, showing a stronger inhibitor in comparison with ketoconazole. Overall, our findings indicate the potential risk of difenoconazole for the disruption of human CYP3A4.     

7种农药对管氏肿腿蜂的毒性及初级风险评价

为评估农药对寄生类自然天敌昆虫的安全性,选择管氏肿腿蜂(Scleroderma guani Xiao et Wu)作为受试生物,采用管测药膜法测定了3种杀虫剂、2种除草剂、2种杀菌剂对其致死效应,并根据田间推荐剂量计算暴露量,采用风险商值HQ对杀虫剂进行风险评估。结果显示,与空白对照比较,3种杀虫剂均具明显毒性作用,其中丁硫克百威、吡虫啉和呋虫胺对管氏肿腿蜂的24 h半致死量(24 h-LR50)分别为5.11、2.92和0.06 g a.i.·ha-1,农田内风险商值分别为60.23、16.64和3 105。除草剂和杀菌剂在3倍最大田间推荐剂量作用下,24 h管氏肿腿蜂死亡率均小于50%。上述结果表明,在田间推荐用量下,3种杀虫剂对管氏肿腿蜂的初级风险评价为存在高风险,建议进一步开展高级阶段风险评估或者采取合理的风险管理措施来降低风险;除草剂和杀菌剂对管氏肿腿蜂的风险可接受。     

气浮技术在膜生物反应器剩余污泥浓缩过程中的应用

污泥浓缩作为污泥处理的关键环节之一,开发高效的污泥浓缩工艺对于降低污泥含水率、提高脱水设备的运行效率、降低脱水能耗具有十分重要的意义。针对MBR污泥浓度高、污泥粒径小、污泥沉降性能较差等特点,故采用传统的重力浓缩和机械浓缩技术很难有效实现污泥浓缩。因此,尝试采用气浮浓缩技术降低污泥含水率的可行性。从气浮浓缩的中试结果来看,较适宜运行参数为:固体负荷为15 kg/(m2·h),水力负荷为1.5 m3/(m2·h),回流比为1,PAM投配率2‰(w/w干固体),溶气压力为0.4 MPa,气固比为0.03。经过中试设备进行气浮浓缩后,污泥含水率降低至96%左右。此外,还研究了采用气液多相泵系统对剩余污泥的浓缩效率,结果显示,该设备的使用相对于传统溶气气浮工艺,其优点表现在占地小、工程造价低以及运行成本低等方面。