Remediation of soils on municipal rendering plant territories using Miscanthus × giganteus

Environmental Science and Pollution Research - Phytoremediation, as a cost-effective, highly efficient, environmentally friendly, and green approach, gained attention to the removal of metals,...     

Landfill leachates and wastewater of maritime origin as possible sources of endocrine disruptors in municipal wastewater

Environmental Science and Pollution Research - In this study, wastewater from municipal services, such as a port wastewater reception facility (PRF-WW) and a municipal solid waste plant (MSWP), was...     

Active methods of mercury removal from flue gases

Due to its adverse impact on health, as well as its global distribution, long atmospheric lifetime and propensity for deposition in the aquatic environment and in living tissue, the US Environmental Protection Agency (US EPA) has classified mercury and its compounds as a severe air quality threat. Such widespread presence of mercury in the environment originates from both natural and anthropogenic sources. Global anthropogenic emission of mercury is evaluated at 2000 Mg year⁻¹. According to the National Centre for Emissions Management (Pol. KOBiZE) report for 2014, Polish annual mercury emissions amount to approximately 10 Mg. Over 90% of mercury emissions in Poland originate from combustion of coal.

The purpose of this paper was to understand mercury behaviour during sub-bituminous coal and lignite combustion for flue gas purification in terms of reduction of emissions by active methods. The average mercury content in Polish sub-bituminous coal and lignite was 103.7 and 443.5 μg kg⁻¹. The concentration of mercury in flue gases emitted into the atmosphere was 5.3 μg m⁻³ for sub-bituminous coal and 17.5 μg m⁻³ for lignite. The study analysed six low-cost sorbents with the average achieved efficiency of mercury removal from 30.6 to 92.9% for sub-bituminous coal and 22.8 to 80.3% for lignite combustion. Also, the effect of coke dust grain size was examined for mercury sorptive properties. The fine fraction of coke dust (CD) adsorbed within 243–277 μg Hg kg⁻¹, while the largest fraction at only 95 μg Hg kg⁻¹. The CD fraction < 0.063 mm removed almost 92% of mercury during coal combustion, so the concentration of mercury in flue gas decreased from 5.3 to 0.4 μg Hg m⁻³. The same fraction of CD had removed 93% of mercury from lignite flue gas by reducing the concentration of mercury in the flow from 17.6 to 1.2 μg Hg m⁻³. The publication also presents the impact of photochemical oxidation of mercury on the effectiveness of Hg vapour removal during combustion of lignite. After physical oxidation of Hg in the flue gas, its effectiveness has increased twofold.

     

Cadmium,lead and mercury concentrations in pathologically altered human kidneys

Heavy metals, including cadmium (Cd), lead (Pb) and mercury (Hg) act as nephrotoxic agents, particularly in the renal cortex. The aim of the study was to determine the concentrations of Cd, Pb and Hg in kidneys removed from patients due to lesions of various etiologies and from patients after the rejection of transplanted kidneys. Additionally, we determined the influence of selected biological and environmental factors on the concentrations of toxic metals. The study material consisted of kidneys with tumor lesions (n = 27), without tumors (n = 7) and its extracted grafts (n = 10) obtained from patients belongs to the north-western areas of Poland. The determined metal concentrations in the renal cortex and medulla may be arranged in the following descending order: Cd > Pb > Hg. The highest concentrations of Cd and Hg were found in the cortex, while the maximum content Pb was observed in the medulla. Significant correlations were found in the concentrations of the same metals between cortex and medulla and between Pb and Hg in the renal medulla. Pb content was higher in the renal medulla of men than in the cortex of the elderly (above 60 years of age). The highest concentrations of Pb and Hg were found in the cortex and medulla, of the kidneys had not neoplastic changes, and lower content of these metals were found in the extracted kidney grafts. In summary, renal grafts accumulate less heavy metals than cancerous kidneys, what could have been caused by immunosuppressors taken by the graft recipients. Moreover, sex, age and smoking are key factors responsible for xenobiotics concentrations.     

Phenolic compounds in leaves of Salix species and hybrids growing under different soil conditions

The leaves of eight Salix species/hybrids were collected from two sites with different soil conditions including metal concentrations to investigate the concentration of Cu, Zn and Pb, phenolic profile and antioxidant scavenging activity. Cu, Zn and Pb, phenolic content and scavenging activity in leaves from the control area (lower concentration of metals in soil) (site C) were lower than in plants cultivated in site G (higher concentration of metals in soil). The content of Cu, Pb and Zn in leaves was in the range 9.21 (site G)–52.36 (site G), 0.41 (site C)?12.03 (site C) and 27.23 (site C)–214.44 (site G) mg?kg^?1, respectively. Total phenolic content ranged between 18.19 (site C) and 84.71 (site G) mg gallic acid equivalent per gram of dry matter. Total flavonoid content was between 7.98 (site C) and 54.48 (site G) mg catechin g^?1?d.m. The scavenging effect on 2,2-diphenyl-1-picrylhydrazyl˙ ranged between 33.6% (site C) and 56.3% (site G). Phenolic acids, myricetin and quercetin were quantified in leaves. The results show that phenolics are involved during adaptive mechanisms under elevated content of Cu, Pb and Zn in soil. Changes in the phenolic composition in leaves can be suggested as indicators of metal stress in Salix plants.     

Sulfadimethoxine and sulfaguanidine: their sorption potential on natural soils

Sulfonamides (SAs) are one of the oldest groups of veterinary chemotherapeutic agents. As these compounds are not completely metabolized in animals, a high proportion of the native form is excreted in feces and urine. They are therefore released either directly to the environment in aquacultures and by grazing animals, or indirectly during the application of manure or slurry. Once released into the environment, SAs become distributed among various environmental compartments and may be transported to surface or ground waters. The physicochemical properties of SAs, dosage and nature of the matrix are the factors mainly responsible for their distribution in the natural environment. Although these rather polar compounds have been in use for over half a century, knowledge of their fate and behavior in soil ecosystems is still limited. Therefore, in this work we have determined the sorption potential of sulfadimethoxine and sulfaguanidine on various natural soils. The influence on sorption of external factors, such as ionic strength and pH, were also determined. The sorption coefficients (K_d) obtained for the sulfonamides investigated were quite low (from 0.20 to 381.17 mL g⁻¹ for sulfadimethoxine and from 0.39 to 35.09 mL g⁻¹ for sulfaguanidine), which indicated that these substances are highly mobile and have the potential to run off into surface waters and/or infiltrate ground water. Moreover, the sorption of these pharmaceuticals was found to be influenced by OC, soil solution pH and ionic strength, with higher K_d values for soils of higher OC and lower K_d values with increasing pH and ionic strength.     

Pesticide burial grounds in Poland: a review

Obsolete pesticides were stored in Poland from the middle sixties until the late eighties of the 20th century mostly in underground disposal sites, called "pesticide burial grounds" or "pesticide tombs". The total amount of pesticide waste and packaging materials disposed of in these landfills exceeded 20000 Mg. Typically, the content of a pesticide tomb was dominated by organochlorine pesticides (comprising 10-100% of the total waste volume) with DDT as the prevailing compound. Other pesticide types, such as phosphoroorganic, carbamate insecticides, dinitrophenols, phenoxyacids, and inorganic compounds were stored in smaller quantities, usually not exceeding 10-20% of the total waste volume. With the growing awareness of the threats that these landfills posed to the environment, the first inventory for the whole country was made in 1993 and remediation was initiated in 1999. The total amount of waste, which had to be removed from the known pesticide tombs (hazardous substances, contaminated soils, construction materials etc.) was about 100000 Mg. According to the National Waste Management Plan, the reclamation of pesticide tombs was assumed to have been finished by the end of 2010, however, this goal has not been achieved. The aim of this review is to present a historical perspective of pesticide burial grounds in Poland with an emphasis on their creation, function, inventory, and remediation. Based on unpublished reports, and other published materials of limited availability written in Polish, this review may serve as a source of information for representatives of other countries, where remediation of pesticide burial grounds is still in progress. The experience gained over a ten-year period, when restoration of pesticide tombs was implemented in Poland, reveals that there are many obstacles to this action arising not only from technical, but also from economic and social issues.     

Towards Participatory Geographic Information Systems for community-based environmental decision making

This article discusses the potential of Geographic Information Systems (GIS) to become an information technology enabling groups of people to participate in decisions shaping their communities and promoting sustainable use of natural resources. It explains the concept of participation in the context of planning and decision making. In this context Participatory GIS (PGIS) offers tools that can be used to help the public become meaningfully involved in decision making processes affecting their communities. Following an overview of research on PGIS and its current status the article presents two recent studies of PGIS in water resource planning; one involving the use of computer generated maps representing simple information structures and the other involving the use of more sophisticated information tools. The synthesis of both studies provides the bases for discussing the prospects of PGIS to empower citizens in making decisions about their communities and resources.     

Utility of Gridded Rainfall for IHACRES Daily River Flow Predictions in Southern California Watersheds1

Abstract: Studies to regionalize conceptual hydrologic models generally require rainfall and river flow data from multiple watersheds. Besides the considerable time (cost) to assemble and process rainfall data for many watersheds, investigators often need to choose from a number of candidate gauges, subjectively weighing the relative importance of proximity and elevation to select a representative rainfall dataset. The Unified Raingauge Dataset (URD) is a gridded daily rainfall dataset that covers the conterminous United States at 0.25 × 0.25 degrees spatial resolution and is available from 1948 to present. The objective of this study was to determine whether uncertainty in daily river flow predictions using the conceptual hydrologic model IHACRES in small to moderate size watersheds (50‐400 km²) in southern California would increase if URD gridded rainfall data were used in place of single rain gauge data to calibrate the model. Rain gauge data were obtained from the gauge nearest the watershed centroid and the gauge closest in elevation to the watershed mean elevation. Results from 20 randomly selected watersheds indicated that IHACRES calibration performance was similar using rainfall data from the URD grids and rain gauge data. There was some evidence of greater uncertainties associated with the URD calibrations in areas where topography may affect rainfall amounts. In contrast to the URD data, monthly gridded data produced by the Parameter‐Elevation Regressions on Independent Slopes Model (PRISM) includes adjustments for elevation and produces gridded values at a finer spatial resolution (4 km²). A limited test on two watersheds demonstrated that scaling the URD daily rainfall estimates to match the PRISM monthly values may improve rainfall estimates and model simulation performance.     

Contamination of Polish national parks with heavy metals

The paper presents results of screening analysis of all Polish national parks (23) contamination with Cd, Cu, Pb and Zn on the basis of a three-level characteristic of heavy metal presence in Norway spruce stands: accumulation on the needle surface, concentration of heavy metals in spruce needles and concentration of bioavailable heavy metals in the soil. Based on the obtained results, the classification of forest ecosystem hazard in national parks with heavy metals was made using synthetic indicators. It was found out that Babiogórski, Magurski, Ojcowski and Gorczański National Parks, located in the southern part of the country, were the most polluted with heavy metals. It is probably due to a higher industrial activity in this part of Poland and the transboundary transport of air pollutants. A little lower level of pollution was observed in Kampinoski National Park located in the middle of the country. The concentration of heavy metals found in needles from national parks does not seem to be harmful for the health status of the trees. Statistically significant correlation between all parameters, which was found for cadmium--the most mobile of the analysed elements--shows that this metal can be proposed as a marker to reflect present effect of industrial emission on forests.