Indoor and outdoor air PBDE levels in a Southwestern US city

Levels of polybrominated diphenyl ether (PBDE) flame retardants have been increasing in humans and the environment for the past few decades. Human levels are markedly higher in the US than Europe. Although food appears to be a significant route of intake, food PBDE levels are not substantially higher in the US than Europe. House and office dust appear to be major routes of exposure with air believed to usually provide a lesser route of intake. Because there are very few measurements of airborne PBDE that have been performed in relevant microenvironments in the US, increased efforts to assess airborne PBDE in the US as sources of exposure are needed. This study reports, for the first time from a Southwestern US city in Texas, the results of measurements of airborne PBDE in multiple locations, two outdoor and six indoor (residential and office) from active air sampling with collection of a combination of both vapor- and particulate-phase PBDE. Higher PBDE levels were measured in indoor than outdoor air, which confirms previous findings. Of 11 measured congeners including BDE 209, total PBDE levels in two outdoor air samples were 112 and 125 pg m^?3 and the indoor air levels ranged from 175 to 1232 pg m^?3 with a median of 572 pg m^?3. These findings suggest that sources of air contamination with PBDE may be similar in Texas as elsewhere in North America. However, more sampling is required to (1) better determine if this is the case and (2) attempt to characterize potential sources of PBDE contamination in both indoor and outdoor air by analysis of congener patterns.     

Assessment of toxicity of two types of drill cuttings from a drilling rig on the Trinidad East coast using Metamysidopsis insularis

This study investigated the relative toxicity of water-based cuttings (WBC) and synthetic oil-based cuttings (SOBC) to the marine species, Metamysidopsis insularis. Results obtained indicate that SOBC (LC₅₀ 1.2 (0.85–1.6)%) was more toxic to M. insularis than WBC (LC₅₀ 9.9 (8.3–11.8)%), with similar metal contents in both types of cuttings. The elevated levels of metals found in the cuttings when compared to surficial sediments may be due to both drilling fluids, as well as the rock strata from which the cuttings were obtained. Furthermore, total petroleum hydrocarbon (TPH) analyses demonstrated significantly higher concentrations of TPH present in SOBC (14,680?±?1250?mg?kg^?1) compared to WBC (860?±?115?mg?kg^?1). This may also be due to the increased depth and hence oil bearing rock formations in the selected sampling area, along with the associated synthetic oil-based drilling fluid. These findings therefore supply evidence that drill cuttings after treatment prior to discharge are potentially toxic to marine organisms.     

Magnetic particles precipitated onto wheat husk for removal of methyl blue from aqueous solution

Magnetic particles prepared via co-precipitation and impregnated onto wheat husk (MN-WH) were used for the removal of methyl blue (MB) from aqueous solution. Experiments were conducted in a batch mode for optimization regarding pH, contact time, adsorbent dose, initial dye concentrations, and temperature. Maximum adsorption (98%) was achieved at pH 5. The adsorption data were fitted into pseudo-first, pseudo-second, intraparticle diffusion, and Elovich equation revealing that adsorption followed pseudo-second-order kinetics. The four most common isotherm models, i.e. the Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich (D–R), were used to evaluate the data, with the best fit to a Langmuir isotherm (R² = 0.996), followed by a Freundlich isotherm (R² = 0.995), indicating monolayer adsorption of MB on the surface of MN-WH. Thermodynamic parameters calculated from the Van't Hoff equation revealed that the adsorption is exothermic (ΔHº = ?19.7 kJ mol^?1).     

Proteomics study of Southern Punjab Pakistani cobra (Naja naja: formerly Naja naja karachiensis) venom

Because of the potential of significant geographic variation in the compositions of snake venoms, much insight can be gained by examining individuals originating from diverse locations, and detailed characterization of any species can only be done by including animals from the entire range. Pakistani N. naja (formerly N. naja karachiensis) venom was decomplexed by applying diverse techniques and found a concoction of proteins (a total of 43 venomous proteins comprising 11 super families) from 6 to 200 kilodaltons in size. Among them three finger toxins (58%), phosphoplipses A₂ (19%), snake venom metalloproteinases (5%), l-amino acid oxidases (5%), helvepryns (3%), vespryns (2%), cobra venom factor (2%), 5′-nucleotidases (2%), venom nerve growth factor (2%), and Kunitz type serine protease inhibitor (2%) were included. It is the first report that this venom possesses significantly higher percentage of three finger toxins belonging to the cytotoxins (32% overall) and α‐neurotoxins (32% overall, predominately long chain neurotoxins, 24% overall) compared to N. naja from other geographic locations. Better understanding of intraspecific variations in venom can improve the development of location-specific anti-venoms. Furthermore, this pool of diverse toxins could potentially be a source of novel drug candidates for the treatment of muscarinic acetylcholine receptors mediated nervous disorders.     

Scalp hair metal analysis in the assessment of the occupational exposure of arc welders

Eleven metals (Ca, Mg, Fe, Zn, Cu, Mn, Cd, Co, Cr, Ni and Pb) were estimated in hair samples of metal arc welders and a control group with the same socioeconomic background. Nitric acid–perchloric acid wet digestion procedure was adopted for the estimation of endogenous metal contents by ICP-AE technique. The study exhibited the following increasing order of the metal concentrations: Cd??1, dry weight, respectively. On average, the levels of Mn, Ni, Pb and Fe were found to be 1.5–2.4 times higher in the hair of welders compared with controls. Besides age and exposure which were strongly correlated, Cu–Mg, Mn–Mg, Ca–Co and Cd–Zn also showed significantly positive correlations. The identification of metal sources, done by cluster and principal component analyses, revealed four factors: age and exposure; Cu, Mg, Mn and Fe; Ca and Co; Cd, Zn, Ni and Pb. High levels of Fe were found to have a depleting impact on Co levels. The arc welders were feared to accumulate heavy metals in their bodies due to long-term endogenous exposure.     

Microwave-Induced Modification of Physical and Functional Characteristics and Antioxidant Potential of Alkali-Soluble Cell Wall Polysaccharides of Nelumbo nucifera Rhizome

Journal of Polymers and the Environment - The alkali-soluble cell wall polysaccharides (CWPs), extracted from Nelumbo nucifera rhizome flour (NNRF), were treated with microwave radiation to modify...     

Seed maturity indices in Aisandra butyracea--a multipurpose tree species of lower Himalaya

Fruits of Aisandra butyracea (Roxb.) Lamb. were collected from two sites located at different altitudes in Kumaun Himalaya for analyzing the seed maturity in relation to various fruit and seed characters. The mean seed size (length x width) across the collection dates varied between 186.44 +/- 0.05 and 238.17 +/- 0.5 mm2 across both the elevations. The fruit colour changed from dark green in the beginning to pale yellow on the maturity. The range of seed moisture content (62.83 +/- 1.33 to 63.46 +/- 0.89%) coincided with maximum germination. The colour change and seed moisture content appear to be the major indicators of seed maturation in A. butyracea.     

A mini-review on rare earth metal-doped TiO<Subscript>2</Subscript> for photocatalytic remediation of wastewater

Titanium dioxide (TiO₂) has been considered a useful material for the treatment of wastewater due to its non-toxic character, chemical stability and excellent electrical and optical properties which contribute in its wide range of applications, particularly in environmental remediation technology. However, the wide band gap of TiO₂ photocatalyst (anatase phase, 3.20 eV) limits its photocatalytic activity to the ultraviolet region of light. Besides that, the electron-hole pair recombination has been found to reduce the efficiency of the photocatalyst. To overcome these problems, tailoring of TiO₂ surface with rare earth metals to improve its surface, optical and photocatalytic properties has been investigated by many researchers. The surface modifications with rare earth metals proved to enhance the efficiency of TiO₂ photocatalyts by way of reducing the band gap by shifting the working wavelength to the visible region and inhibiting the anatase-to-rutile phase transformations. This review paper summarises the attempts on modification of TiO₂ using rare earth metals describing their effect on the photocatalytic activities of the modified TiO₂ photocatalyst.     

Concentrations of Heavy Metals in Hair and Nails of Young Pakistanis: Correlation with Dietary Elements

Hair and nail samples from young Pakistani adults were separately analyzed for quantification of Cd, Cr, Cu, Ni, Pb, and Zn concentrations. The concentrations of these metals were also analyzed in commonly consumed local foods to evaluate potential correlation of hair and nail concentrations with diet. Pearson correlation coefficients ranged from 0.349 to 0.999, demonstrating diet to be a significant contributor for accumulation of heavy metals in humans.     

Future-year ozone prediction for the United States using updated models and inputs

The relationship between emission reductions and changes in ozone can be studied using photochemical grid models. These models are updated with new information as it becomes available. The primary objective of this study was to update the previous Collet et al. studies by using the most up-to-date (at the time the study was done) modeling emission tools, inventories, and meteorology available to conduct ozone source attribution and sensitivity studies. Results show future-year, 2030, design values for 8-hr ozone concentrations were lower than base-year values, 2011. The ozone source attribution results for selected cities showed that boundary conditions were the dominant contributors to ozone concentrations at the western U.S. locations, and were important for many of the eastern U.S. locations. Point sources were generally more important in the eastern United States than in the western United States. The contributions of on-road mobile emissions were less than 5 ppb at a majority of the cities selected for analysis. The higher-order decoupled direct method (HDDM) results showed that in most of the locations selected for analysis, NOx emission reductions were more effective than VOC emission reductions in reducing ozone levels. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.

Implications: The relationship between emission reductions and changes in ozone can be studied using photochemical grid models, which are updated with new available information. This study was to update the previous Collet et al. studies by using the most current, at the time the study was done, models and inventory to conduct ozone source attribution and sensitivity studies. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.