UASB-BIOFOR滤池组合工艺处理柠檬酸废水的中试研究

采用UASB-BIOFOR滤池组合工艺处理柠檬酸废水,对其中的操作步骤及注意事项进行了详细介绍.实验结果表明,该组合工艺对柠檬酸废水处理效果良好,系统出水能够达到GB 8978-1996《污水综合排放标准》中的一级标准.     

4-氯苯酚在水溶液中的光化学反应(Ⅰ)单线态氧和自由基的产生

在模拟太阳光照射下，４氯苯酚（４ＣＰ）浓度迅速降低，反应过程对应着产生大量的单线态氧和自由基．金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋能够加速这一过程，尤以Ｆｅ２＋、Ｆｅ３＋的影响更明显；在模拟太阳光照射下，向４ＣＰ体系加入的富里酸（ＦＡ），对４ＣＰ浓度降低略起抑制作用，这表明二者之间存在相互作用．但当再加入金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋后，能够加速４ＣＰ浓度降低，尤以Ｆｅ２＋、Ｆｅ３＋的影响更显著．     

西藏自治区的土地、粮食和人口

本文讨论了西藏自治区土地系统、农业发展、人口增长和它们之间的相互关系。指出西藏土地类型复杂多样,极少土地能用于种植业,单位产量亦不高。人均占有粮食不足300kg,若干牧区不足50kg。粮食生产不能满足人口增长的需求。这种趋势在今后30年内仍将继续下去。 为了解决土地—粮食—人口三者之间关系的不协调,需采取若干切实措施。文中亦强调人口控制的必要。     

氧化铁脱除SO_2本征动力学研究

研究了温度、SO_2浓度、氧浓度及水蒸汽含量对α-Fe_2O_3脱除SO_2的影响规律.实验得到了幂函数型本征动力学模型中的各项参数值.结合流-固相反应理论,选择了流-固相反应模型,结果表明,在动力学控制区采用随机孔模型时,反应率-时间关系的实验数据与模型计算值能较好的吻合.     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

新型双向挤压模架

此文介绍一种新型液压模架的结构及工作原理。该模架导向精度高,生产节拍16件/分。     

Method of pollution sources assessment in relation to residential site selection

Much investigation supports a high incidence of disease and death rates when people live in ambient polluted air for a long time. Thus, the location of residential sites is important from a public health viewpoint. The method outlined in this paper is useful for determining the location of residential sites based on pollution sources assessment.     

滇南湖群环境综合治理总体规划研究

本规划采用决策支持系统 (DSS)对湖泊的水量平衡和水质现状以及采用不同措施对水质的影响进行评估 ,并通过多标准分析 (MAC)对每项措施进行优先排序 ,使规划更具科学性和可操作性。     

BOD测定中微生物传感器法与稀释接种法的比较

用微生物传感器快速法和稀释接种法对地表水和污水处理厂出水中的生化需氧量(BOD)进行了测定,用数理统计的方法对两种方法测定的结果进行了比较。     

微机上冲裁CAD系统的开发

此文介绍了一套在微机上开发的冲裁CAD系统。它以Foxbase作为数据库管理系统,Trubo C为编程语言,能进行冲裁件图形输入与显示、工艺性分析、优化单排排样和选择板材规格、冲裁件尺寸识别和模具刃口尺寸计算、冲裁力和压力中心计算、以及凹模周界尺寸计算等。本系统主界面为下拉式菜单界面,全中文提示,人机界面友好,具有较好的可扩充性和容错性。