Mechanism and characterization of microplastic aging process: A review

● Methods for estimating the aging of environmental micro-plastics were highlighted. ● Aging pathways & characterization methods of microplastics were related and reviewed. ● Possible approaches to reduce the contamination of microplastics were proposed. ● The prospect and deficiency of degradable plastics were analyzed. With the increasing production of petroleum-based plastics, the problem of environmental pollution caused by plastics has aroused widespread concern. Microplastics, which are formed by the fragmentation of macro plastics, are bio-accumulate easily due to their small size and slow degradation under natural conditions. The aging of plastics is an inevitable process for their degradation and enhancement of adsorption performance toward pollutants due to a series of changes in their physiochemical properties, which significantly increase the toxicity and harm of plastics. Therefore, studies should focus on the aging process of microplastics through reasonable characterization methods to promote the aging process and prevent white pollution. This review summarizes the latest progress in natural aging process and characterization methods to determine the natural aging mechanism of microplastics. In addition, recent advances in the artificial aging of microplastic pollutants are reviewed. The degradation status and by-products of biodegradable plastics in the natural environment and whether they can truly solve the plastic pollution problem have been discussed. Findings from the literature pointed out that the aging process of microplastics lacks professional and exclusive characterization methods, which include qualitative and quantitative analyses. To lessen the toxicity of microplastics in the environment, future research directions have been suggested based on existing problems in the current research. This review could provide a systematic reference for in-depth exploration of the aging mechanism and behavior of microplastics in natural and artificial systems.     

Immobilization of Cd2+ and Pb2+ by biomineralization of the carbonate mineralized bacterial consortium JZ1

Environmental Science and Pollution Research - Microbially induced carbonate precipitation (MICP) has been proven to effectively immobilize Cd2+ and Pb2+ using a single bacterium. However, there is...     

北京市臭氧污染跳变型特征及影响因素分析

基于2016~2022年北京市环境监测和气象观测数据,结合后向轨迹聚类和潜在源区贡献分析北京市臭氧（O₃）污染特征、气象影响和潜在源区.结果表明,2016~2022年北京市共发生41次具有跳变特征的O₃污染过程,平均为5.9次·a^-1,发生时间集中在5~7月,跳变当日（OJD2）较跳变前一日（OJD1）的ρ（O₃-8h）平均值偏高78.3%,峰值浓度偏高78.9%,OJD2区域O₃浓度高值带呈现由南向北推进的特征.北京市跳变O₃污染发生主要原因可归纳为不利气象条件导致的本地积累叠加区域传输影响.跳变型O₃污染发生时具有偏南风频率增加、温度上升、气压降低和降水减少的特征,偏南风频率增加为O₃及其前体物的传输提供条件,在本地高温作用下快速发生光化学反应,叠加降水较少,综合推高OJD2的O₃浓度水平.聚类分析得到6条气团输送路径,OJD2来自偏北方向的气团减少11.2%,来自偏南和偏东方向气团增加6.7%和4.4%,气团以短距离传输为主,偏南和偏东方向对应的O₃浓度较高,对北京污染贡献较大.潜在源区分析揭示OJD2的O₃污染的主要潜在源区是京津冀中南部和东部,贡献了82.6%污染轨迹.跳变型O₃污染区域输送贡献明显,需要加强京津冀区域联防联控．     

生态足迹方法在县级城市的运用--以成都市龙泉驿区为例

本文以成都市1999年和2003年统计年鉴和龙泉驿区统计年鉴1998年和2003年的数据为依据,采用生态足迹的方法,对龙泉驿区1998年和2003年的可持续发展性进行定量评价,通过计算和分析,结果表明龙泉驿区1998年和2003年人均生态足迹均为赤字,且2003年比1998年的生态足迹赤字更为加剧,这反映出人类的生产、生活强度超过了生态系统的承载能力,此区域生态系统处于过度开发利用和压力之下,随着经济的发展,人口的增加,这种趋势还在继续加大.     

鱼体甲基汞的萃取富集和测定

研究了苯萃取和半胱氨酸滤纸富集再用苯洗脱的方法,使鱼肉中甲基汞得到富集和提取。建立了气相色谱测定甲基汞的方法并对所建立的方法进行评价。结果表明:加标回收率为87.10%～105.69%;变异系数为2.93%。符合要求,大量样品实验表明,该方法适用于痕量甲基汞的提取和分析。     

室内空气颗粒物中HCHs和DDTs的含量

采用中流量TSP采样器在北京大学住宅小区和教学楼同步采集了室内和室外的大气颗粒物样本 ,分析了其中的HCHs和DDTs残留量 .结果表明 :室内外大气颗粒物中∑HCH的含量分别为 0 1 39ng·m- 3和 0 1 63ng·m- 3,∑DDT含量为 0 40 1ng·m- 3和 0 42 4ng·m- 3.室内外的浓度差别不大 .但由于室内空气颗粒物含量显著低于室外 ,其颗粒物中HCHs和DDTs的质量浓度显著高于室外 ,这可能与室内颗粒物的粒径较小有关 .考虑到室内外空气颗粒物中有机氯异构分布的相似性 ,居住区室内空气颗粒物中的HCHs和DDTs主要来自室外 .而实验室内空气在一定程度上受HCHs内部源污染 .     

双酚F对斑马鱼早期生命阶段内分泌干扰效应研究

双酚A(bisphenol,BPA)的内分泌干扰性导致许多国家出台了管控措施,双酚F(bisphenol F,BPF)作为其替代物被大量使用,并广泛存在于水体和食品中,导致人群和野生动物长期处于其慢性暴露过程中,可能会威胁人类和生态健康.以斑马鱼胚胎为研究模型,将其暴露于不同浓度的BPF中至受精后144 h(hours...     

湖北省生态环境与健康素养水平调查及对策研究

根据2019年7月国务院印发和出台的《国务院关于实施健康中国行动的意见》(国发〔2019〕13号)和《健康中国行动(2019—2030年)》提出的相应考核指标,在基本理念、基本知识和基本技能3个生态环境与健康素养一级分类指标中,当调查对象得分之和大于或等于卷面分数的70％,则认为其具备该分类生态环境与健康素养.居民整体...     

Evaluation of activated sludge properties’ changes in industrial-wastewater pre-treatment: role of residual aluminum hydrolyzed species with different polymerization degree

● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater.