Distribution and chemical speciation of arsenic in different sized atmospheric particulate matters

The distribution and chemical speciation of arsenic (As) in different sized atmospheric particulate matters (PMs), including total suspended particles (TSP), PM₁₀, and PM_2.5, collected from Baoding, China were analyzed. The average total mass concentrations of As in TSP, PM₁₀, and PM_2.5 were 31.5, 35.3, and 54.1 µg/g, respectively, with an order of PM_2.5 >PM ₁₀ > TSP, revealing that As is prone to accumulate on fine particles. Due to the divergent toxicities of different As species, speciation analysis of As in PMs is further conducted. Most of previous studies mainly focused on inorganic arsenite (iAs^III), inorganic arsenate (iAs^V), monomethylarsonate (MMA), and dimethylarsinate (DMA) in PMs, while the identification and sensitive quantification of trimethylarsine oxide (TMAO) were rarely reported. In this study, a high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry system was optimized for As speciation including TMAO in PMs. An anion exchange column was used to separate MMA, DMA and iAs^V, while a cation exchange column to separate TMAO and iAs^III. Results showed that iAs^V was the dominate component in all the samples, corresponding to a portion of 79.2% ± 9.3% of the total extractable species, while iAs^III, TMAO and DMA made up the remaining 21%. Our study demonstrated that iAs^III accounted for about 14.4% ± 11.4% of the total extracted species, with an average concentration of 1.7 ± 1.6 ng/m³. It is worth noting that TMAO was widely present in the samples (84 out of 97 samples), which supported the assumption that TMAO was ubiquitous in atmospheric particles.     

Spatiotemporal variations of ambient air pollutants and meteorological influences over typical urban agglomerations in China during the COVID-19 lockdown

To investigate the air quality change during the COVID-19 pandemic, we analyzed spatiotemporal variations of six criteria pollutants in nine typical urban agglomerations in China using ground-based data and examined meteorological influences through correlation analysis and backward trajectory analysis under different responses. Concentrations of PM_2.5, PM₁₀, NO₂, SO₂ and CO in urban agglomerations respectively decreased by 18%–45% (30%–62%), 17%–53% (22%–39%), 47%-64% (14%–41%), 9%–34% (0%–53%) and 16%-52% (23%–56%) during Lockdown (Post-lockdown) period relative to Pre-lockdown period. PM_2.5 pollution events occurred during Lockdown in Beijing-Tianjin-Hebe (BTH) and Middle and South Liaoning (MSL), and daily O₃ concentration rose to grade Ⅱ standard in Post-lockdown period. Distinct from the nationwide slump of NO₂ during Lockdown period, a rebound (～40%) in Post-lockdown period was observed in Cheng-Yu (CY), Yangtze River Middle-Reach (YRMR), Yangtze River Delta (YRD) and Pearl River Delta (PRD). With slightly higher wind speed compared with 2019, the reduction of PM_2.5 (51%–62%) in Post-lockdown period is more than 2019 (15%–46%) in HC (Harbin-Changchun), MSL, BTH, CP (Central Plain) and SP (Shandong-Peninsula), suggesting lockdown measures are effective to PM_2.5 alleviation. Although O₃ concentrations generally increased during the lockdown, its increment rate declined compared with 2019 under similar sunlight duration and temperature. Additionally, unlike HC, MSL and BTH, which suffered from additional (> 30%) air masses from surrounding areas after the lockdown, the polluted air masses reaching YRD and PRD mostly originated from the long-distance transport, highlighting the importance of joint regional governance.     

Chemical characteristics, oxidative potential, and sources of PM2.5 in wintertime in Lahore and Peshawar, Pakistan

The chemical characteristics, oxidative potential, and sources of PM_2.5 were analyzed at the urban sites of Lahore and Peshawar, Pakistan in February 2019. Carbonaceous species, water soluble ions, and metal elements were measured to investigate the chemical composition and sources of PM_2.5. The dithiothreitol (DTT) consumption rate was measured to evaluate the oxidative potential of PM_2.5. Both cities showed a high exposure risk of PM_2.5 regarding its oxidative potential (DTT_v). Carbonaceous and some of the elemental species of PM_2.5 correlated well with DTT_v in both Lahore and Peshawar. Besides, the DTT_v of PM_2.5 in Lahore showed significant positive correlation with most of the measured water soluble ions, however, ions were DTT-inactive in Peshawar. Due to the higher proportions of carbonaceous species and metal elements, Peshawar showed higher mass-normalized DTT activity of PM_2.5 compared to Lahore although the average PM_2.5 concentration in Peshawar was lower. The high concentrations of toxic metals also posed serious non-carcinogenic and carcinogenic risks to the residents of both cities. Principle component analysis coupled with multiple linear regression was applied to investigate different source contributions to PM_2.5 and its oxidative potential. Mixed sources of traffic and road dust resuspension and coal combustion, direct vehicle emission, and biomass burning and formation of secondary aerosol were identified as the major sources of PM_2.5 in both cities. The findings of this study provide important data for evaluation of the potential health risks of PM_2.5 and for formulation of efficient control strategies in major cities of Pakistan.     

油田井口加热炉烟尘排放超标原因分析及治理方法

针对井口加热炉燃用套管气出现的烟尘排放超标问题,从燃烧方式及燃料组成方面分析发现,加热炉所采用的扩散式燃烧,火焰面燃料侧缺少氧气,燃料产生热分解生成炭黑颗粒;另外,套管气含有大量的重碳烷烃,其稳定性差、分解温度低,加剧了热分解反应。因此,控制套管气质量和改变燃烧方式是治理烟尘排放超标的基本途径。但是井口加装轻烃回收装置,分离出套管气中的重碳烷烃,成本高不可行。最终,基于预混燃烧理论,设计了双调风预混燃烧装置,现场实施结果表明,不仅烟尘排放降低了87.8%,而且NOx排放降低了58.6%、热效率提升了8.2%。实践证明,预混燃烧是治理井口加热炉烟尘排放超标的有效方法。     

Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.     

Speciation characterization and coagulation of poly-silica-ferric-chloride：The role of hydrolyzed Fe（Ⅲ） and silica interaction

The highly e cient inorganic polymer flocculants (IPFs) of the ferric-silica system is a new and promising coagulant. Interactions between ferric species and silica play a large part in the coagulation of suspensions. These e ects are quite distinct from those associated with polymeric or colloid silica. However, although these species are key to coagulation e ciency, they have not been comprehensively discussed. A new type of coagulant, poly-silica-ferric-chloride (PFSC), was synthesized by co-polymerization and characterized by time complexation spectroscopy and photon correlation spectroscopy. Compared with traditional ferric salt, the results indicated that PFSC had a higher molecular weight, lesser positive charge, lower Feb and higher Fec. The higher the Si/Fe ratio, the higher the silica and lower the silicac found. The PFSC with appropriate polysilica acid not only obtained better coagulation/flocculation e ciency in turbidity removal, enhanced the flocculation index (FI) and provided less residual ferric, it also lowered water treatment costs compared to traditional ferric salt. Results showed that PFSC could remove colloid particles in water by charge neutralization and sweeping, adsorption bridging mechanism.     

对开发建设项目环境影响评价中公众参与内容的探讨

环境影响评价中公众参与的内容应与建设项目的生产性质、污染状况相适应。不同类型的开发建设项目开展的公众参与内容是不同的。对项目公众参与的组织形式及内容进行了探讨，便于指导建设项目的环境影响评价工作。     

Species diversity and leaf functional traits of understory vegetation one year after severe burning北大核心CSCD

以北京油松(Pinus tabuliformis)人工林为研究对象,采用独立样本T检验、冗余分析等方法,分析重度火烧1年后林下植被(灌木层和草本层)的物种多样性、叶功能性状及其与土壤因子的关系.结果显示:(1)与对照样地相比,重度火烧后灌木层物种丰富度指数极显著降低(P <0.01),但Shannon指数、Simpson指数以及Pielou指数虽呈下降趋势但未达显著水平(P> 0.05);草本层除Pielou指数外,各物种多样性指数均显著增加(P <0.05).(2)重度火烧样地灌木层和草本层的叶厚度(LT)、叶干物质含量(LDMC)、叶碳含量(LCC)、叶磷含量(LPC)均高于对照样地,而比叶面积(SLA)、叶氮含量(LNC)、叶片氮磷比(N:P)、叶绿素含量(CHL)低于对照样地,除灌木层LPC和N:P及草本层SLA、LCC和LPC外,其他各叶功能性状在火烧与对照间差异均达显著水平.对于不同生活型而言,对照样地的LDMC、LNC、LCC、CHL存在显著差异,而在重度火烧后差异不显著;LT、SLA在重度火烧和对照样地上均呈现显著差异;而LPC、N:P在重度火烧与对照样地上均无显著差异.(3)重度火烧后1年,灌木层和草本层的叶功能性状均仅与土壤含水率、容重和非毛管孔隙度密切相关.本研究表明在油松人工林重度火烧后1年,灌木层物种多样性降低,而草本层物种多样性增加,灌草层的各叶功能性状主要受土壤物理性质的影响呈现不同的变化规律.(图4参45)     

Hydraulic jumps with low inflow Froude numbers: air–water surface patterns and transverse distributions of two-phase flow properties

Environmental Fluid Mechanics - Hydraulic jumps are commonly employed as energy dissipators to guarantee long-term operation of hydraulic structures. A comprehensive and in-depth understanding of...     

Evidence for the involvement of Fe(IV) in water treatment by Fe(III)-activated sulfite

Water contamination by emerging organic pollutants is calling for advanced methods of remediation such as iron-activated sulfite-based advanced oxidation. Sulfate radical, SO₄^??, and hydroxyl radical, ^?OH, are the primary reactive intermediates formed in the Fe(III)/sulfite system, yet the possible involvement of Fe(IV) produced from Fe(II) and persulfates is unclear. Here we explored the role of Fe(IV) in the Fe(III)/sulfite system by methyl phenyl sulfoxide (PMSO) probe assay, electron paramagnetic resonance spectra analysis, alcohol scavenging experiment, and kinetic simulation. Results show that PMSO is partially transformed into methyl phenyl sulfone (PMSO₂), thus evidencing Fe(IV) formation. The remaining degradation of PMSO is due to SO₄^?? and ^?OH. The contribution of Fe(IV) versus free radicals is progressively promoted when the Fe(III)-sulfite reaction proceeds, with an upper limit of 80–90%. The contribution of Fe(IV) versus free radicals increases with Fe(III) and sulfite dosages, and decreases with increasing pH. Overall, our findings demonstrate the involvement of Fe(IV) in the Fe-catalyzed sulfite auto-oxidation process.