New investigation findings on the 2006 Danvers,MA explosion

On November 22, 2006 the largest explosion in the history of Massachusetts occurred in Danvers, MA at approximately 2:46 am. This paper presents a detailed analysis into the potential causes and lessons learned from the Danvers explosion. Other investigative groups concluded that the cause of the explosion was an overheated production tank. However, the analyses presented here demonstrate that their proposed scenario could not have occurred and that other potential causes are more likely.Using the computational fluid dynamics tool FLACS, it was possible to investigate the chain of events leading to the explosion, including: (1) evaluating various leak scenarios by modeling the dispersion and mixing of gases and vapors within the facility, (2) evaluating potential ignition sources within the facility of the flammable fuel–air mixture, and (3) evaluating the explosion itself by comparing the resulting overpressures of the exploding fuel–air cloud with the structural response of the facility and the observed near-field and far-field blast damage. These results, along with key witness statements and other analyses, provide valuable insight into the likely cause of this incident. Based on the results of our detailed analysis, lessons learned regarding the investigative procedure and methods for mitigating this and future explosions are discussed.     

Alcohol ignition interlock programs

The alcohol ignition interlock is an in-vehicle DWI control device that prevents a car from starting until the operator provides a breath alcohol concentration (BAC) test below a set level, usually .02% (20 mg/dl) to .04% (40 mg/dl). The first interlock program was begun as a pilot test in California 18 years ago; today all but a few US states, and Canadian provinces have interlock enabling legislation. Sweden has recently implemented a nationwide interlock program. Other nations of the European Union and as well as several Australian states are testing it on a small scale or through pilot research. This article describes the interlock device and reviews the development and current status of interlock programs including their public safety benefit and the public practice impediments to more widespread adoption of these DWI control devices. Included in this review are (1) a discussion of the technological breakthroughs and certification standards that gave rise to the design features of equipment that is in widespread use today; (2) a commentary on the growing level of adoption of interlocks by governments despite the judicial and legislative practices that prevent more widespread use of them; (3) a brief overview of the extant literature documenting a high degree of interlock efficacy while installed, and the rapid loss of their preventative effect on repeat DWI once they are removed from the vehicles; (4) a discussion of the representativeness of subjects in the current research studies; (5) a discussion of research innovations, including motivational intervention efforts that may extend the controlling effect of the interlock, and data mining research that has uncovered ways to use the stored interlock data record of BAC tests in order to predict high risk drivers; and (6) a discussion of communication barriers and conceptual rigidities that may be preventing the alcohol ignition interlock from taking a more prominent role in the arsenal of tools used to control DWI. Whether interlock programs can help public policymakers achieve their expressed goals of substantially reducing the level of impaired driving will remain uncertain until procedural barriers and intransigent judiciary practices can be overcome that provide for more systematic routine use of interlock programs. Despite strong effectiveness evidence in all studies to date, the real potential of this technology to reduce the road toll cannot be estimated until they are more widely adopted.     

Patterns of drinking four weeks prior to an alcohol-related vehicular crash

OBJECTIVE: The primary objective of the study was to determine if drinking patterns on the days immediately prior to an alcohol-related motor vehicle crash (ARMVC) were significantly different than drinking patterns in the weeks prior to the crash. METHODS: Following ARMVC, 187 hospitalized non-alcohol dependent young-adults (43 females, 144 males) were enrolled. Mean age was 29.03 years, mean blood alcohol level was 165.18 mg/dL, and mean injury severity score was 10.50. When alcohol-free, subjects were interviewed by nurse clinicians to determine the quantity/frequency of alcohol consumption during the 28 days prior to the crash. Subjects reported the number of standard drinks using the Timeline Followback procedure. Total drinks/day were determined, with day 1 considered 4 weeks prior to the crash and day 28 the day of the crash. A random-intercepts general linear mixed model (GLMM) was used to test the effect of several covariates (segment 1 [days 1-26], segment 2 [days 27-28], age, sex, race, holiday/non-holiday period, driver/passenger status, and weekend/weekday crash) on the amount of standard drinks/day. RESULTS: There was no significant interaction among the covariates. The only significant predictors of drinks/day were segment 2 (b = .322, p < .0001) and gender (b = -.221, p = .016). The positive, statistically significant slope for segment 2 indicated an increase in consumption of drinks/day in the two-day period prior to the ARMVC and the negative slope for gender indicated greater consumption of drinks/day for men than women. CONCLUSION: Persons injured in an ARMVC had a significant increase in alcohol consumption on the day before and the day of vehicular crashes (days 27 and 28) as compared to the first 26 days in the 28-day period preceding the crash. When non-alcohol-dependent subjects are counseled to reduce their risk of traffic crashes, they should be alerted that when their patterns of drinking change, they are at higher risk than usual for a crash.     

Towards the improvement of UN N.5 test method for the characterization of substances which in contact with water emit flammable gases

This paper deals with a sensitivity analysis of main parameters affecting the measurement of the gas flowrate emitted during testing substances for their potential to emit flammables gases in dangerous quantities where in contact with water, according to the UN N.5 test procedure. UN N.5 is described in the Manual of Tests and Criteria of United Nations (part of the Orange Book) (ONU Manual of Test and Criteria, 2008), serving both applications of international transport regulations as well as classifications of dangerous substances according to Globally the Harmonized System (GHS) and the derived regulation applying in the EU known as “CLP” Regulation (Regulation (EC) No 1271/2008). The main reason that justifies the present research is that the measurement of emitted gases is highly critical in the final classification resulting from the interpretation of the test results. Moreover, that idea has been raised to adapt the UN N.5 test protocol for classifying, in the future, substances that by contact with water would emit dangerous quantities of toxic gases.Experiments have been carried out to cover the analysis of the influence of ambient temperature, overall volume of glassware, nature of aqueous media, mass sample and sample-to-liquid mass ratio, since such parameters are not fixed within any defined range in the UN N.5 test procedure. The influence of the flow rate measuring device was also considered. Results confirm that the above mentioned parameters may play a significant role to such an extent as to finally alter the final classification resulting from the testing. Guiding principles have also been derived from our measurements and observations towards an improved and more robust UN test protocol in the future.     

Flammability of hydrocarbon and carbon dioxide mixtures

The effect of carbon dioxide (CO₂) concentration on the ignition behaviour of hydrocarbon and CO₂ gas mixtures is examined in both jets and confined explosions. Results from explosion tests are presented using a 20 l explosion sphere and an 8 m long section of 1.04 m diameter pipeline. Experiments to assess the flame stability and ignition probability in free-jets are reported for a range of different release velocities. An empirically-based flammability factor model for free-jets is also presented and results are compared to ignition probability measurements previously reported in the literature and those resulting from the present tests.The results help to understand how CO₂ changes the severity of fires and explosions resulting from hydrocarbon releases. They also demonstrate that it is possible to ignite gas mixtures when the mean concentration is outside the flammable range. This information may be useful for risk assessments of offshore platforms involved in carbon sequestration or enhanced oil recovery, or in assessing the hazards posed by poorly-inerted hydrocarbon processing plant.     

Identifying best practices states in motorcycle rider education and licensing

PROBLEM: After decreasing to a historic low in 1997, motorcycle crash-related fatalities are increasing. Although causes remain unclear, motorcycle rider education and licensing play key roles in reducing motorcycle crashes and injuries. Yet, little is known about what constitutes effective rider training and licensing. This study develops a model of best practices in motorcycle rider education and licensing and combines primary and secondary data to identify states that most closely adhere to this model. Evidence on the validity of the model is also examined. METHOD: States were rated along three areas of best practices: (a) program administration; (b) rider education; and (c) licensing based on 2001 data collected for a National Highway Traffic Safety Administration (NHTSA)-sponsored study. RESULTS: Results indicate wide variation in states' adherence to best practices; several states meet most, others very few. When the areas of best practices are considered separately, a state tends to behave similarly on all three. Initial evidence supports the validity of the model, with high best practices states having the lowest rates of motorcycle fatalities. IMPACT ON TRAFFIC SAFETY: As motorcycle-related crashes increase and state and federal support for rider education programs diminishes, it is critical that states identify deficiencies in their program and learn from successful states about efficient, cost-effective strategies for increasing best practices in motorcycle rider education and licensing.     

Wet oxidative regeneration of activated carbon loaded with reactive dye

Wet Oxidative Regeneration (WOR) of powdered activated carbon (PAC) and granular activated carbon (GAC) loaded with the reactive dyes, namely chemictive brilliant blue R and cibacron turquoise blue G, was studied. Attempts were made to regenerate the loaded carbons designated now as spent carbon. A slurry (10% w/v) of spent carbon in distilled water was oxidized by wet oxidation in the temperature range of 150-250 degrees C using oxygen partial pressures between 0.69-1.38 MPa in an 1 1 SS 316 autoclave. The percent regeneration was determined from a ratio, X(RC)/X(VC), corresponding to an equilibrium adsorption capacity of regenerated carbon/equilibrium adsorption capacity of virgin carbon from an initial adsorption period of 3 h. It was observed that the regeneration mainly occurred due to the oxidation of the adsorbates taking place on the surface of carbon. It was possible to regenerate the spent GAC and PAC to the extent of more than 98% (approximately X(RC)/X(VC) > 0.98) by wet oxidation. After four consecutive cycles of adsorption and regeneration using the same stocks of GAC, carbon weight loss observed at 200 degrees C was about 40%. SEM studies of the regenerated carbon showed widening of the pores and loss of structure between the adjacent pores as compared with the virgin carbon. PAC was found to be more suitable as compared with GAC for the adsorption and wet oxidative regeneration processes to treat the aqueous solution containing lower concentration of unhydrolyzed reactive dye. The suitability of wet oxidative regeneration is demonstrated at a bench scale to treat the synthetic reactive dye solution.