Severity of zinc and iron malnutrition linked to low intake through a staple crop: a case study in east-central Pakistan

Environmental Geochemistry and Health - Micronutrients deficiency in soil–plant and human is well-addressed; however, little is known about their spatial distribution, magnitude of deficiency...     

Developing the first halophytic turfgrasses for the urban landscape from native Arabian desert grass

Environmental Science and Pollution Research - Climate change is occurring and is influencing biological systems through augmented temperatures, more inconstant precipitation, and rising CO2 in the...     

Assessing the economic value of urban green spaces in Kuala Lumpur

Environmental Science and Pollution Research - This study assessed the economic value of public urban green spaces (UGSs) in Kuala Lumpur (KL) city by using the hedonic price method (HPM). It...     

Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide–tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96 MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported.     

Spatial distribution and source apportionment of PCBs in sediments around İzmit industrial complexes, Turkey

The spatial distribution, degree of pollution and major sources of PCBs were evaluated in surficial sediments within the heavily urbanized and industrialized ?zmit Bay and its main freshwater inputs. ΣPCB concentrations range from 2.90 to 85.4ngg(-1) in marine sediments and from ND to 47.7ngg(-1) in freshwater sediments. Results suggest that high concentrations of ΣPCBs were localized around a chlor-alkali plant and an industry that handles bulk liquid, dry and drummed chemicals, and petroleum products in the Bay. Using a chemical mass balance receptor model (CMB), major sources of PCBs in the region were investigated. The CMB model identified Aroclor 1254 and 1260 to be the major PCB sources in marine sediments and the less chlorinated Aroclor 1248 and 1242 as the major PCB sources in freshwater sediments. The potential sources for the PCBs were briefly discussed in terms of their use in various industrial applications.     

Development of a novel mathematical model using a group contribution method for prediction of ionic liquid toxicities

A new mathematical model has been developed that expresses the toxicities (EC₅₀ values) of a wide variety of ionic liquids (ILs) towards the freshwater flea Daphnia magna by means of a quantitative structure-activity relationship (QSAR). The data were analyzed using summed contributions from the cations, their alkyl substituents and anions. The model employed multiple linear regression analysis with polynomial model using the MATLAB software. The model predicted IL toxicities with R² = 0.974 and standard error of estimate of 0.028. This model affords a practical, cost-effective and convenient alternative to experimental ecotoxicological assessment of many ILs.     

Tensile,Flexural and Chemical Resistance Properties of Sisal Fibre Reinforced Polymer Composites: Effect of Fibre Surface Treatment

In this study, effect of fibre surface treatment on tensile, flexural and chemical resistance properties were studied for sisal fibre reinforced composites. Natural ligno cellulosic sisal fibre reinforced composites were prepared by different surface treatments by hand lay-up method. Fibre surface treatments were carried out to produce good interface between the fibre and the matrix to improve the mechanical properties. Fibre surface treatments were done by boiled the sisal fibres in different % of NaOH and treated the fibres in different % of NaOH, treated in acetic acid and methanol. Unsaturated polyester resin was used as the matrix for preparing the composites. For comparison, these properties for untreated sisal fibre reinforced composites were also studied. From the results it was observed that 18% aqueous NaOH boiled sisal fibre reinforced composites have higher tensile, flexural properties than other composites. Untreated sisal fibre composites show lower properties than treated composites. Chemical resistance properties indicate that all sisal fibre reinforced composites are resistance to all chemicals except carbon tetra chloride. The tests are carried out as per the ASTM standards.     

Inactivation of pathogenic micro-organisms in hospital waste using a microwave

The aim of this study was to investigate the efficiency of dry sterilization by microwave in the inactivation of pathogenic bacteria in blood wastes. Eight bacteria strains were selected for this purpose and these are S. aureus, Salmonella sp., E. faecalis, K. pneumonia, P. aeruginosa, E. coli, Streptococcus Group B and Bacillus sp. Sterilization by microwave was carried out at 385, 450 and 700 watts for 1, 5 and 10 min, respectively. Isolation and enumeration of pathogenic bacteria before and after treatments were carried out using direct plate technique and inactivation was determined in terms of log reduction. Increasing the running time and power to 10 min and 700 watts did not increase log reduction of most of pathogenic bacteria especially of gram negative bacteria. Revival of pathogenic bacteria during the storage period might be aided by the presence of a low moisture content which helps bacterial cells to revive but not to reproduce or over-grow. It can be concluded that dry sterilization of blood wastes by microwave reduces the number and limited re-growth of these pathogenic bacteria during storage time, due to the lower moisture content in the blood wastes.     

Oil-Induced environmental Kuznets curve in organization of petroleum exporting countries (OPEC)

This study investigates the environmental Kuznets curve (EKC) hypothesis in 10 of the Organization of Petroleum Exporting Countries (OPEC). To realize the study’s aims a time series model is built based on the period 1977–2008, utilizing the ecological footprint as an environmental indicator and income, labour, capital, oil consumption and oil price as economic indicators. Employing the Autoregressive Distributed Lag (ARDL) approach, by comparing the short and long-run income elasticities, the EKC hypothesis is present in six OPEC countries namely Algeria, Iraq, Venezuela, Nigeria, Qatar and Kuwait. Moreover, the Toda–Yamamoto–Dolado–Lütkepohl (TYDL) causality tests outcome show that, after oil consumption, the most significant factors in increasing ecological footprint are labor and capital. This implies the relocation of pollution intensive industries to almost all of the OPEC countries. However, oil prices reduce environmental damage by its negative effect on the ecological footprint. From the outcome of this study it is important for the investigated countries to reduce their consumption of fossil fuel energy since it represents an important source of pollution. This can be achieved by allocating more labor and capital in projects and investments on renewable energy, energy efficiency and energy saving.     

Cytotoxicity,genotoxicity and oxidative stress of malachite green on the kidney and gill cell lines of freshwater air breathing fish Channa striata

The cytotoxicity, genotoxicity and oxidative stress of malachite green (MG) was investigated using the fish Channa striata kidney (CSK) and Channa striata gill (CSG) cell lines. Five concentrations ranging from 0.001 to 10 μg mL^?1 were tested in three independent experiments. Cytotoxicity was assessed by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, Rhodamine 123 and Alamar Blue. The mitochondrial changes and apoptosis of MG-exposed cells were observed by Rhodamine 123 and acridine orange/ethidium bromide (AO/EB) staining, respectively. In vitro potential DNA damaging effect of MG was tested using comet assay. Mitochondrial damage, apoptosis and DNA fragmentation increased in a concentration-dependent manner. Additionally, DNA electrophoretic mobility experiments were carried out to study the binding effect of MG to double-stranded DNA (dsDNA) of cells. DNA shift mobility experiments showed that MG is capable of strongly binding to linear dsDNA causing its degradation. Biochemical parameters such as lipid peroxidation (MDA), catalase (CAT) activity and reduced glutathione (GSH) levels were evaluated after exposure to MG. In CSK and CSG cell lines exposed to MG for 48 h, a significant increase in lipid peroxidation, which might be associated with decreased levels of reduced glutathione and catalase activity in these cell lines (p?相似文献