Possible options to slow down the advancement rate of Tarbela delta

The pivot point of delta in Tarbela dam has reached at about 10.6 km from the dam face which may result in blocking of tunnels. Tarbela delta was modeled from 1979 to 2060 using hec-6 model. Initially, the model was calibrated for year 1999 and validated for years 2000, 2001, 2002, and 2006 by involving the data of sediment concentration, reservoir cross sections (73 range lines), elevation-area capacity curves, and inflows and outflows from the reservoir. Then, the model was used to generate future scenarios, i.e., run-1, run-2, and run-3 with pool levels; 428, 442, and 457 m, respectively, till 2060. Results of run-1 and run-2 showed advancement to choke the tunnels by 2010 and 2030, respectively. Finally, in run-3, the advancement was further delayed showing that tunnels 1 and 2 will be choked by year 2050 and pivot point will reach at 6.4 km from the dam face.     

Role of economic growth and innovative technologies in the outlook of energy and environmental efficiency: a way forward for developing Asian economies

Environmental Science and Pollution Research - Energy consumption is widely regarded as the primary driver of economic development and environmental degradation. The current study examines how...     

Protective effects of curcumin on antioxidant status,body weight gain,and reproductive parameters in male rats exposed to subchronic 2,3,7,8-tetrachlorodibenzo-p-dioxin

The aim of this study was to investigate the effects of curcumin (CUR) on antioxidant status, body weight (BW) gains, and some reproductive parameters in male rats exposed to subchronic doses of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Thirty-two rats were divided into four groups. The first group was kept as control. The second group (TCDD group) was given TCDD at a dose of 50 ng·kg^?1 BW per day; the third group (CUR group) was treated with CUR at a dose of 80 mg·kg^?1 BW per day. The fourth group (TCDD + CUR group) was given TCDD and CUR at the same doses simultaneously. Malondialdehyde (MDA) levels were significantly increased in the TCDD group. In addition, TCDD exposure decreased liver superoxide dismutase (SOD) activity, catalase (CAT) activities of kidney and brain, glutathione peroxidase (GSH-Px) activities of liver, kidney, and brain, and glutathione levels of liver, kidney, and heart. However, CUR treatment with TCDD exposure decreased MDA levels in all tissues and increased SOD activities of liver, kidney, and brain, CAT activity of heart, and GSH-Px activities of heart and brain. TCDD caused a decrease in BW gain, and CUR partially eliminated this effect of TCDD. In addition, while reproductive organ weights, sperm concentration, and sperm motility tended to decrease with TCDD exposure, these effects tended to be close to normal levels by CUR treatment. In conclusion, CUR was seen to be effective in the treatment and prevention of toxicity induced by subchronic TCDD exposure.     

Constrains on mangrove forests and conservation projects in Pakistan

Mangroves forests are facing serious stresses which jeopardize their sustainability and their existence in Pakistan. Theses coastal forests are found in the Indus delta in Sindh and the coastal areas of Sonmiani, Kalmat and Gawatar bay in Balochistan. A significant reduction in the fresh water supply and increased marine water pollution in from industries as well as over harvesting of mangroves and fishes by the local peoples, sedimentation, population stress and coastal erosion are usually considered to be the immediate causes of mangrove loss in Pakistan. Various Projects have been under taken in the past and in current scenario to conserve the resources of mangrove areas. Strong planning with the collaboration of the local institutes at the grass-root levels will be helpful to strengthen their capacity and to achieve the targets easily, and they will also help in achieving the conservation goals in a sustainable manner. It is predictable that large-scale plantation of this mangroves species in these areas would increase the resources in coastal areas, resulting economic benefit to the local people.     

Energy and environmental applications of carbon nanotubes

Energy and environment are major global issues inducing environmental pollution problems. Energy generation from conventional fossil fuels has been identified as the main culprit of environmental quality degradation and environmental pollution. In order to address these issues, nanotechnology plays an essential role in revolutionizing the device applications for energy conversion and storage, environmental monitoring, as well as green engineering of environmental friendly materials. Carbon nanotubes and their hybrid nanocomposites have received immense research attention for their potential applications in various fields due to their unique structural, electronic and mechanical properties. Here, we review the applications of carbon nanotubes (1) in energy conversion and storage such as in solar cells, fuel cells, hydrogen storage, lithium ion batteries and electrochemical supercapacitors, (2) in environmental monitoring and wastewater treatment for the detection and removal of gas pollutants, pathogens, dyes, heavy metals and pesticides and (3) in green nanocomposite design. Integration of carbon nanotubes in solar and fuel cells has increased the energy conversion efficiency of these energy conversion applications, which serve as the future sustainable energy sources. Carbon nanotubes doped with metal hydrides show high hydrogen storage capacity of around 6?wt% as a potential hydrogen storage medium. Carbon nanotubes nanocomposites have exhibited high energy capacity in lithium ion batteries and high specific capacitance in electrochemical supercapacitors, in addition to excellent cycle stability. High sensitivity and selectivity towards the detection of environmental pollutants are demonstrated by carbon nanotubes based sensors, as well as the anticipated potentials of carbon nanotubes as adsorbent to remove environmental pollutants, which show high adsorption capacity and good regeneration capability. Carbon nanotubes are employed as reinforcement material in green nanocomposites, which is advantageous in supplying the desired properties, in addition to the biodegradability. This article presents an overview of the advantages imparted by carbon nanotubes in electrochemical devices of energy applications and green nanocomposites, as well as nanosensor and adsorbent for environmental protection.     

Response of tomato (Lycopersicon esculentum Mill.) to salinity in the early growth stages for agricultural cultivation in saline environments

Salinity is a serious environmental problem. Growing of plants like tomato can be solution for coping with soil salinity. For this purpose, response of tomato to salinity has been tested in the early growth stages. Characteristics of germination (percentage and period; length and fresh-dry weight of radicle and hypcotyl) and seedling (length and fresh-dry weight of root, shoot and whole plant; leaf number and area based on Relative Growth Rate); Na+ and K+ content of leaf; K+/Na+ rate of leaf has been studied at the 0, 50, 100 and 150 mM NaCl levels. Thus, it determined that tomato can be indicator for agricultural cultivation at the salinity environments at the early growth stages.     

The effects of a coal power plant on the environment and wildlife in southeastern Turkey

This study was carried out to determine the possible effects of the Afsin-Elbistan Coal Power Plant (AECPP) on the environment.. The soil and plant samples were collected, based on the dominant wind direction, which is from northeast to southwest and we defined the northeast part of the plant as the less contaminated direction (LCD) and the southwest part as the more contaminated direction (MCD). The results indicated that the AECPP created environmental problems and caused contaminations especially in the MCD. The results of the statistical analysis for the measured attributes between the LCD and the MCD showed that there were significant differences for pH, SO4(-2)-S, Ni and Pb. Significant correlations were found between the distance from the AECPP and some of the measured soil and plant parameters in the MCD. The concentrations of SO4(-2)-S, Ni and Pb decreased as the distance increased. The discharge water carries a potential risk for the aquatic life and soil health in the area. The honey quality was also affected negatively by fly ash and emission.     

Degradation of 14C-glyphosate and aminomethylphosphonic acid (AMPA) in three agricultural soils

Glyphosate (N-phosphonomethyl glycine) is the most used herbicide worldwide. The degradation of 14C-labeled glyphosate was studied under controlled laboratory conditions in three di erent agricultural soils: a silt clay loam, a clay loam and a sandy loam soil. The kinetic and intensity of glyphosate degradation varied considerably over time within the same soil and among di erent types of soil. Our results demonstrated that the mineralization rate of glyphosate was high at the beginning of incubation and then decreased with time until the end of the experiment. The same kinetic was observed for the water extractable residues. The degradation of glyphosate was rapid in the soil with low adsorption capacity (clay loam soil) with a short half-life of 4 days. However, the persistence of glyphosate in high adsorption capacity soils increased, with half-live of 19 days for silt clay loam soil and 14.5 days for sandy loam soil. HPLC analyses showed that the main metabolite of glyphosate, aminomethylphosphonic acid (AMPA) was detected after three days of incubation in the extracts of all three soils. Our results suggested that the possibility of contamination of groundwater by glyphosate was high on a long-term period in soils with high adsorption capacity and low degrading activities and/or acid similar to sandy loam soil. This risk might be faster but less sustainable in soil with low adsorption capacity and high degrading activity like the clay loam soil. However, the release of non-extractable residues may increase the risk of contamination of groundwater regardless of the type of soil.     

Isolation of Cr(Ⅵ) reducing bacteria from industrial effluents and their potential use in bioremediation of chromium containing wastewater

The present study is aimed at assessing the ability of Bacillus sp.JDM-2-1 and Staphylococcus capitis to reduce hexavalent chromium into its trivalent form.Bacillus sp.JDM-2-1 could tolerate Cr(Ⅵ) (4800 μg/mL) and S.capitis could tolerate Cr(Ⅵ) (2800 μg/mL).Both organisms were able to resist Cd2+ (50 μg/mL),Cu2+ (200 μg/mL),Pb2+ (800 μg/mL),Hg2+ (50 μg/mL) and Ni2+ (4000 μg/mL).S.capitis resisted Zn2+ at 700 μg/mL while Bacillus sp.JDM-2-1 only showed resistance up to 50 μg/mL.Bacillus sp.JDM-2-1 and S.capitis showed optimum growth at pH 6 and 7,respectively,while both bacteria showed optimum growth at 37℃.Bacillus sp.JDM-2-1 and S.capitis could reduce 85% and 81% of hexavalent chromium from the medium after 96 h and were also capable of reducing hexavalent chromium 86% and 89%,respectively,from the industrial effluents after 144 h.Cell free extracts of Bacillus sp.JDM-2-1 and S.capitis showed reduction of 83% and 70% at concentration of 10 μg Cr(Ⅵ)/mL,respectively.The presence of an induced protein having molecular weight around 25 kDa in the presence of chromium points out a possible role of this protein in chromium reduction.The bacterial isolates can be exploited for bioremediation of hexavalent chromium containing wastes,since they seem to have the potential to reduce the toxic hexavalent form to its nontoxic trivalent form.