Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream

TiO2 thin film photocatalyst was successfully synthesized and immobilized on glass reactor tube using sol-gel method. The synthesized TiO2 coating was transparent, which enabled the penetration of ultra-violet (UV) light to the catalyst surface. Two photocatalytic reactors with different operating modes were tested: (a) tubular photocatalytic reactor with re-circulation mode and (b) batch photocatalytic reactor. A new proposed TiO2 synthesized film formulation of 1 titanium isopropoxide: 8 isopropanol: 3 acetyl acetone: 1.1 H2O: 0.05 acetic acid (in molar ratio) gave excellent photocatalytic activity for degradation of phenol and methylene blue dye present in the water. The half-life time, t1/2 of photocatalytic degradation of phenol was 56 min at the initial phenol concentration of 1000 microM in the batch reactor. In the tubular photocatalytic reactor, 5 re-circulation passes with residence time of 2.2 min (single pass) degraded 50% of 40-microM methylene blue dye. Initial phenol concentration, presence of hydrogen peroxide, presence of air bubbling and stirring speed as the process variables were studied in the batch reactor. Initial methylene blue concentration, pH value, light intensity and reaction temperature were studied as the process variables in the tubular reactor. The synthesized TiO2 thin film was characterized using SEM, XRD and EDX analysis. A comparative performance between the synthesized TiO2 thin film and commercial TiO2 particles (99% anatase) was evaluated under the same experimental conditions. The TiO2 film was equally active as the TiO2 powder catalyst.     

Isolation of Cr(VI) reducing bacteria from industrial e uents and their potential use in bioremediation of chromium containing wastewater

The present study is aimed at assessing the ability of Bacillus sp.JDM-2-1 and Staphylococcus capitis to reduce hexavalent chromium into its trivalent form.Bacillus sp.JDM-2-1 could tolerate Cr(Ⅵ) (4800 μg/mL) and S.capitis could tolerate Cr(Ⅵ) (2800 μg/mL).Both organisms were able to resist Cd2+ (50 μg/mL),Cu2+ (200 μg/mL),Pb2+ (800 μg/mL),Hg2+ (50 μg/mL) and Ni2+ (4000 μg/mL).S.capitis resisted Zn2+ at 700 μg/mL while Bacillus sp.JDM-2-1 only showed resistance up to 50 μg/mL.Bacillus sp.JDM-2-1 and S.capitis showed optimum growth at pH 6 and 7,respectively,while both bacteria showed optimum growth at 37℃.Bacillus sp.JDM-2-1 and S.capitis could reduce 85% and 81% of hexavalent chromium from the medium after 96 h and were also capable of reducing hexavalent chromium 86% and 89%,respectively,from the industrial effluents after 144 h.Cell free extracts of Bacillus sp.JDM-2-1 and S.capitis showed reduction of 83% and 70% at concentration of 10 μg Cr(Ⅵ)/mL,respectively.The presence of an induced protein having molecular weight around 25 kDa in the presence of chromium points out a possible role of this protein in chromium reduction.The bacterial isolates can be exploited for bioremediation of hexavalent chromium containing wastes,since they seem to have the potential to reduce the toxic hexavalent form to its nontoxic trivalent form.     

Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil

In the present study, response surface methodology (RSM) involving central composite design (CCD) was applied to optimize the reaction parameters of biodiesel production from yellow mustard (Sinapis alba L.) seed oil during the single-step transesterification process. A total of 30 experiments were designed and performed to determine under the effects of variables on the biodiesel yield such as methanol to oil molar ratio (2:1–10:1), catalyst concentration (0.2–1.0 wt.% NaOH), reaction temperature (50–70°C), and reaction time (30–90 min). The second order polynomial model was used to predict the biodiesel yield and coefficient of determination (R²) was found to be at 0.9818. The optimum biodiesel yield was calculated as 96.695% from the model with the following reaction conditions: 7.41:1 of methanol to oil molar ratio, 0.63 wt. % NaOH of catalyst concentration, 61.84°C of reaction temperature, and 62.12 min of reaction time. It is seen that the regression model results were in agreement with the experimental data. The results showed that RSM is a suitable statistical technique for optimizing the reaction parameters in the transesterification process in order to maximize the biodiesel yield.     

Traffic accident reconstruction and an approach for prediction of fault rates using artificial neural networks: A case study in Turkey

Objective: Currently, in Turkey, fault rates in traffic accidents are determined according to the initiative of accident experts (no speed analyses of vehicles just considering accident type) and there are no specific quantitative instructions on fault rates related to procession of accidents which just represents the type of collision (side impact, head to head, rear end, etc.) in No. 2918 Turkish Highway Traffic Act (THTA 1983). The aim of this study is to introduce a scientific and systematic approach for determination of fault rates in most frequent property damage–only (PDO) traffic accidents in Turkey.

Methods: In this study, data (police reports, skid marks, deformation, crush depth, etc.) collected from the most frequent and controversial accident types (4 sample vehicle–vehicle scenarios) that consist of PDO were inserted into a reconstruction software called vCrash. Sample real-world scenarios were simulated on the software to generate different vehicle deformations that also correspond to energy-equivalent speed data just before the crash. These values were used to train a multilayer feedforward artificial neural network (MFANN), function fitting neural network (FITNET, a specialized version of MFANN), and generalized regression neural network (GRNN) models within 10-fold cross-validation to predict fault rates without using software. The performance of the artificial neural network (ANN) prediction models was evaluated using mean square error (MSE) and multiple correlation coefficient (R).

Results: It was shown that the MFANN model performed better for predicting fault rates (i.e., lower MSE and higher R) than FITNET and GRNN models for accident scenarios 1, 2, and 3, whereas FITNET performed the best for scenario 4. The FITNET model showed the second best results for prediction for the first 3 scenarios. Because there is no training phase in GRNN, the GRNN model produced results much faster than MFANN and FITNET models. However, the GRNN model had the worst prediction results. The R values for prediction of fault rates were close to 1 for all folds and scenarios.

Conclusions: This study focuses on exhibiting new aspects and scientific approaches for determining fault rates of involvement in most frequent PDO accidents occurring in Turkey by discussing some deficiencies in THTA and without regard to initiative and/or experience of experts. This study yields judicious decisions to be made especially on forensic investigations and events involving insurance companies. Referring to this approach, injury/fatal and/or pedestrian-related accidents may be analyzed as future work by developing new scientific models.     

Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.     

Geochemical fractionation and spectroscopic fingerprinting for evaluation of the environmental transformation of potentially toxic metal(oid)s in surface–subsurface soils

Environmental Geochemistry and Health - The contamination of soil by toxic metal(oid)s has emerged as a major concern worldwide, particularly in developing countries. A metals behavior in the soil...     

Correlation of cadmium and aluminum in blood samples of kidney disorder patients with drinking water and tobacco smoking: related health risk

The combined exposure to aluminum (Al) and cadmium (Cd) causes more pronounced adverse health effects on humans. The kidneys are the main organs affected by internal exposure to Cd and Al via food and non-food items. The objective of present study was to measure the Al and Cd concentrations in cigarettes tobacco (branded and non-branded) and drinking water (domestic treated, ground and lake water) samples in southern part of Pakistan, to assess the risk due to ingestion of water and inhalation of cigarettes smoke containing high concentrations of both elements. The study population (kidney disorder and healthy) divided into two group based on consuming lake and ground water, while smoking non-branded cigarette as exposed, while drinking domestic treated water and smoking branded cigarette as non-exposed. Electrothermal atomic absorption spectrometry was used to determined Cd and Al concentrations in tobacco, drinking water and blood samples. The resulted data indicated that the levels of Al and Cd in lake and underground water were higher than the permissible limit in drinking water recommended by the World Health Organization. The biochemical parameters of exposed and referent patients, especially urinary N-acetyl-h-glucosaminidase, were used as a biomarkers of kidney disorder. Exposed kidney disorder patients have higher levels of Cd and Al than the exposed referents subjects, while difference was significant when compared to resulted data of non-exposed patients and referents (p = 0.01–0.001). The pearson correlation showed positive correlation between both toxic element concentrations in water, cigarettes versus blood samples of exposed subjects (r = 0.20–0.67 and 0.71–0.82), while lower values were observed for non-exposed subjects (r = 0.123–0.423 and 0.331–0.425), respectively.

     

Episodic envy and counterproductive work behaviors: Is more justice always good?

The authors examined how perceived event‐specific procedural and distributive justice about own and envied others' outcomes interacts with episodic envy to predict counterproductive work behaviors. Our results were consistent with the attribution model of justice, finding that episodic envy significantly predicted counterproductive work behaviors aimed at envied others in the workplace and that this relationship was more pronounced when perceptions of procedural, but not distributive, justice about own or envied others' outcomes were high rather than low. We tested a moderated‐mediation model in which self‐attributions for the outcome mediated the effect of episodic envy on counterproductive work behaviors and that the effect of envy was stronger when perceptions of own or others' procedural justice were high rather than low. This research contributes to the literature on envy processes in the workplace and is the first to use a specific emotion, envy, as a proxy for a negative outcome in a demonstration of the attribution model of justice. Copyright © 2013 John Wiley & Sons, Ltd.     

The status of heavy metal levels in a Ramsar site,Kuala Gula bird sanctuary: the impact of the anthropogenic inputs

Distributions of Cd, Cu, Pb, and Zn in the surface sediments from two sites of the Kuala Gula Bird Sanctuary, Malaysia were monitored for a period of 6 months from October 2006 to March 2007. In December 2006, the concentration of Zn in one location was significantly (p??1) than the other metals at both sites, but in the oxidizable organic fraction it was highest at both sites during October; with mean concentrations of 18?mg?kg^?1 at both locations. In the acid-reducible fraction, high concentrations of Pb (2.3?mg?kg^?1) were detected at station 2 in February 2007, being highest among all four metals at both stations. The acid-reducible fraction found in Pb ranged from 0.10% to 3.1% in both stations. Percentages ranging from 51% to 96% were observed for all four metals in the resistant fraction throughout the sampling period. These results indicate low contributions from anthropogenic sources. The findings constitute a baseline data archive for future reference.     

Oxidative stress in the freshwater cyprinid crucian carp (Carassius carassius L.) upon chronic exposure to endosulfan

Oxidative stress and antioxidant responses of crucian carp, upon chronic exposure to endosulfan, were evaluated in vivo. The lethal concentration (LC_50–96?h) was 70 μg L^?1; on its basis, the fish were exposed to endosulfan at 20, 35, and 50 μg L^?1 and autopsy was done on days 1, 2, 3, 4, 7, 14, 21, 28, and 35. Lipid peroxidation was induced in a concentration-dependent manner, being highest at 50 μg L^?1 (3/4 LC_{50–96 h}, sub-lethal concentration-I, SL-I) on day 4 (720% versus control), followed in its extent (490%) at 30 μg L^?1 (1/2 LC_{50–96 h}, sub-lethal concentration-II, SL-II) on day 7 and lowest (260%) at 10 μg L^?1 (1/4 LC_{50–96 h}, sub-lethal concentration-III, SL-III) on day 14. Glutathione showed a concentration- and time-dependent elevation in the initial phase, with highest level on day 4 (180%) at SL-I, but showed significant reduction in all test concentrations from day 21 of post-exposure. Superoxide dismutase was decreased significantly throughout the study, with highest reduction (63%) on day 4 at SL-I; catalase increased in all test concentrations up to day 14 but showed a significant decrease from the day 28 of post-exposure. The potential role of these parameters as indicators of pesticide pollution in aquatic systems is discussed.