Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur,Malaysia

This paper presents a forecasting study of municipal solid waste generation (MSWG) rate and potential of its recyclable components in Kuala Lumpur (KL), the capital city of Malaysia. The generation rates and composition of solid wastes of various classes such as street cleansing, landscape and garden, industrial and constructional, institutional, residential and commercial are analyzed. The past and present trends are studied and extrapolated for the coming years using Microsoft office 2003 Excel spreadsheet assuming a linear behavior. The study shows that increased solid waste generation of KL is alarming. For instance, the amount of daily residential SWG is found to be about 1.62 kg/capita; with the national average at 0.8–0.9 kg/capita and is expected to be increasing linearly, reaching to 2.23 kg/capita by 2024. This figure seems reasonable for an urban developing area like KL city. It is also found that, food (organic) waste is the major recyclable component followed by mix paper and mix plastics. Along with estimated population growth and their business activities, it has been observed that the city is still lacking in terms of efficient waste treatment technology, sufficient fund, public awareness, maintaining the established norms of industrial waste treatment etc. Hence it is recommended that the concerned authority (DBKL) shall view this issue seriously.     

Efficient DDT and trichlorophenol detoxification using NaBH4 and Devarda alloy

DDT—1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane—is a pesticide that has been widely used to control insects in agriculture. TCP—2,4,6-trichlorophenol—has been used in pesticide formulations as a preservative, disinfectant and antiseptic. Detoxification of DDT and TCP is very difficult due to their stable chemical structure. Here, a mixture of NaBH₄ and Devarda alloy was applied for the first time to detoxify DDT and TCP. Results show 94 % dechlorination of DDT at 100 °C and 97 % dechlorination of TCP at 80 °C. The presence of diphenyl ethane suggests the complete dechlorination of DDT. The formation of benzene suggests a strong reduction. The method is efficient, cost-effective and may be applied at the industrial-level.     

Evaluation and selection strategy for green supply chain using interval-valued q-rung orthopair fuzzy combinative distance-based assessment

Environment, Development and Sustainability - Environmental deterioration and global warming has created a substantial impact on international companies to incorporate eco-friendly, green supply...     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.     

Groundwater modeling of Saq Aquifer Buraydah Al Qassim for better water management strategies

Saudi Arabia is an arid country. It has limited water supplies. About 80?C90% of water supplies come from groundwater, which is depleting day by day. It needs appropriate management. This paper has investigated groundwater modeling of Saq Aquifer in Buraydah Al Qassim to estimate the impact of its excessive use on depletion of Saq Aquifer. MODFLOW model has been used in this study. Data regarding the aquifer parameters was measured by pumping tests. Groundwater levels and discharge of wells in the area for the year 2008 and previous record of year 1999 have been collected from Municipal Authority of Buraydah. Location of wells was determined by Garmin. The model has been run for different sets of pumping rates to recommend an optimal use of groundwater resources and get prolonged life of aquifer. Simulations have been made for a long future period of 27?years (2008?C2035). Model results concluded that pumping from the Saq Aquifer in Buraydah area will result into significant cones of depression if the existing excessive pumping rates prevail. A drawdown up to 28?m was encountered for model run for 27?years for existing rates of pumping. Aquifer withdrawals and drawdowns will be optimal with the conservation alternative. The management scheme has been recommended to be adopted for the future protection of groundwater resources in Kingdom of Saudi Arabia.     

Temporal variation in leachate composition of a newly constructed landfill site in Lahore in context to environmental pollution and risks

Environmental Science and Pollution Research - This study investigated the seasonal and temporal variations in the extent and source of physiochemical and toxic trace elements in the Lakhodair...     

Spatial distribution of polybrominated diphenyl ethers in coastal marine sediments receiving industrial and municipal effluents in Kuwait

Polybrominated diphenyl ether (PBDE) concentrations were measured in surficial sediments from coastal sediments receiving industrial and municipal effluents in Kuwait. The summation PBDE concentrations varied by two orders of magnitude ranging from 80 to 3800 pg g(-1)dw. The congener distribution was dominated by BDE 183, with minor contributions from BDEs 154 and 153. The similarity between the congener profile to that of the technical octa formulation (Bromkal 79-8DE) suggests a source of this product in Kuwait. The observed gradient in concentration distribution, with high summation PBDE concentrations near the shore and an exponential decrease seaward, indicates that wastewater discharge from industrial activities in the study area is the primary source of these compounds in the sediments.     

Isolation of Cr(VI) reducing bacteria from industrial e uents and their potential use in bioremediation of chromium containing wastewater

The present study is aimed at assessing the ability of Bacillus sp.JDM-2-1 and Staphylococcus capitis to reduce hexavalent chromium into its trivalent form.Bacillus sp.JDM-2-1 could tolerate Cr(Ⅵ) (4800 μg/mL) and S.capitis could tolerate Cr(Ⅵ) (2800 μg/mL).Both organisms were able to resist Cd2+ (50 μg/mL),Cu2+ (200 μg/mL),Pb2+ (800 μg/mL),Hg2+ (50 μg/mL) and Ni2+ (4000 μg/mL).S.capitis resisted Zn2+ at 700 μg/mL while Bacillus sp.JDM-2-1 only showed resistance up to 50 μg/mL.Bacillus sp.JDM-2-1 and S.capitis showed optimum growth at pH 6 and 7,respectively,while both bacteria showed optimum growth at 37℃.Bacillus sp.JDM-2-1 and S.capitis could reduce 85% and 81% of hexavalent chromium from the medium after 96 h and were also capable of reducing hexavalent chromium 86% and 89%,respectively,from the industrial effluents after 144 h.Cell free extracts of Bacillus sp.JDM-2-1 and S.capitis showed reduction of 83% and 70% at concentration of 10 μg Cr(Ⅵ)/mL,respectively.The presence of an induced protein having molecular weight around 25 kDa in the presence of chromium points out a possible role of this protein in chromium reduction.The bacterial isolates can be exploited for bioremediation of hexavalent chromium containing wastes,since they seem to have the potential to reduce the toxic hexavalent form to its nontoxic trivalent form.     

Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil

In the present study, response surface methodology (RSM) involving central composite design (CCD) was applied to optimize the reaction parameters of biodiesel production from yellow mustard (Sinapis alba L.) seed oil during the single-step transesterification process. A total of 30 experiments were designed and performed to determine under the effects of variables on the biodiesel yield such as methanol to oil molar ratio (2:1–10:1), catalyst concentration (0.2–1.0 wt.% NaOH), reaction temperature (50–70°C), and reaction time (30–90 min). The second order polynomial model was used to predict the biodiesel yield and coefficient of determination (R²) was found to be at 0.9818. The optimum biodiesel yield was calculated as 96.695% from the model with the following reaction conditions: 7.41:1 of methanol to oil molar ratio, 0.63 wt. % NaOH of catalyst concentration, 61.84°C of reaction temperature, and 62.12 min of reaction time. It is seen that the regression model results were in agreement with the experimental data. The results showed that RSM is a suitable statistical technique for optimizing the reaction parameters in the transesterification process in order to maximize the biodiesel yield.     

Traffic accident reconstruction and an approach for prediction of fault rates using artificial neural networks: A case study in Turkey

Objective: Currently, in Turkey, fault rates in traffic accidents are determined according to the initiative of accident experts (no speed analyses of vehicles just considering accident type) and there are no specific quantitative instructions on fault rates related to procession of accidents which just represents the type of collision (side impact, head to head, rear end, etc.) in No. 2918 Turkish Highway Traffic Act (THTA 1983). The aim of this study is to introduce a scientific and systematic approach for determination of fault rates in most frequent property damage–only (PDO) traffic accidents in Turkey.

Methods: In this study, data (police reports, skid marks, deformation, crush depth, etc.) collected from the most frequent and controversial accident types (4 sample vehicle–vehicle scenarios) that consist of PDO were inserted into a reconstruction software called vCrash. Sample real-world scenarios were simulated on the software to generate different vehicle deformations that also correspond to energy-equivalent speed data just before the crash. These values were used to train a multilayer feedforward artificial neural network (MFANN), function fitting neural network (FITNET, a specialized version of MFANN), and generalized regression neural network (GRNN) models within 10-fold cross-validation to predict fault rates without using software. The performance of the artificial neural network (ANN) prediction models was evaluated using mean square error (MSE) and multiple correlation coefficient (R).

Results: It was shown that the MFANN model performed better for predicting fault rates (i.e., lower MSE and higher R) than FITNET and GRNN models for accident scenarios 1, 2, and 3, whereas FITNET performed the best for scenario 4. The FITNET model showed the second best results for prediction for the first 3 scenarios. Because there is no training phase in GRNN, the GRNN model produced results much faster than MFANN and FITNET models. However, the GRNN model had the worst prediction results. The R values for prediction of fault rates were close to 1 for all folds and scenarios.

Conclusions: This study focuses on exhibiting new aspects and scientific approaches for determining fault rates of involvement in most frequent PDO accidents occurring in Turkey by discussing some deficiencies in THTA and without regard to initiative and/or experience of experts. This study yields judicious decisions to be made especially on forensic investigations and events involving insurance companies. Referring to this approach, injury/fatal and/or pedestrian-related accidents may be analyzed as future work by developing new scientific models.