Impact of environmental production conditions on productivity and efficiency: a case study of wheat farmers in Bangladesh

Environmental conditions significantly affect production, but are often ignored in studies analysing productivity and efficiency leading to biased results. In this study, we examine the influence of selected environmental factors on productivity and efficiency in wheat farming in Bangladesh. Results reveal that environmental production conditions significantly affect the parameters of the production function and technical efficiency, as well as correlates of inefficiency. Controlling for environmental production conditions improves technical efficiency by 4 points (p<0.01) from 86% to 90%. Large farms are more efficient relative to small and medium sized farms (p<0.01 and 0.05), with no variation among regions. Policy implications include soil fertility improvement through soil conservation and crop rotation, improvement in managerial practices through extension services and adoption of modern technologies, promotion of education, strengthening the research-extension link, and development of new varieties that have higher yield potential and are also suitable for marginal areas.     

Spatio-temporal analysis of climatic variables in the western part of Bangladesh

Monitoring and detecting trends of climatic variables like rainfall and temperature are essential for agricultural developments in the context of climate change. The present study has detected trends in annual and cropping seasonal rainfall and temperature data for the period of 1961–2011 using Mann–Kendall (MK) test, Spearman’s rho (SR) test and modified Mann–Kendall test that has been applied to the significant lag-1 serial correlated time series data, and slope has been estimated using Sen’s Slope estimator for twelve meteorological stations located in the western part of Bangladesh covering about 41 % of the country. Almost 71 % trends explored by MK test in annual rainfall are statistically insignificant, and SR test also complies it. The spatial distribution of rainfall trend shows insignificant positive trends in major part of the area. Significant positive trends both by MK test and by SR test at 95 % confidence levels are observed at rates of 8.56, 11.15 and 13.66 mm/year at Dinajpur, Rangpur and Khepupara stations, respectively, and the Kharif season rainfall of these stations also shows significant increasing trends except Dinajpur. On the other hand, significant decreasing trends in annual rainfall are found at Bhola (?11.67 mm/year) and Rajshahi (?5.951 mm/year) stations and decreasing trends in rainfall dominated the Pre-Kharif season over the area. But, 83.33 % of the stations show rising trends in annual mean temperature with significant positive trends (as observed by both MK test and SR test) at Rangpur, Bogra, Faridpur, Jessore and Bhola stations where the rate of changes vary from 0.013 °C/year at Faridpur to 0.08 °C/year at Bhola. Most of the trends in Rabi and Pre-Kharif seasons of mean temperatures are not statistically significant. However, all stations except Barisal show significant rising trends in temperature in Kharif season. To cope with this changing pattern of rainfall and temperature, effective adaptation strategies should be taken to keep up the agricultural production that is related to livelihood of the most people and to ensure the country’s food security.     

Effect of PCM on temperature fluctuation during the door opening of a household refrigerator

Temperature fluctuation inside the cabinet of a household refrigerator significantly affects the quality of preserved food. Phase change material (PCM) is a latent heat storage system that can store and release the heat energy by changing its phase from liquid to solid and solid to liquid respectively. Therefore, use of PCM inside the refrigerator cabinet has the potential for minimizing the temperature fluctuation during the door opening and the power failure. However, very few studies in the literature were dedicated to investigating the role of PCM to reduce the temperature fluctuation. The aim of this work is to experimentally investigate the effects of PCM on temperature fluctuation inside the cabinet of a household refrigerator during the door opening and power failure. The results found that a significantly lower temperature fluctuation can be obtained using PCM. It was found that during the door opening condition the air temperature in the cabinet rose rapidly. However, when a PCM container was used, temperature variation was reduced to 3–5°C. During the power failure, the system with PCM maintained a lower temperature inside the storage chamber for a long period of time (about 2 hours). Moreover, the test results indicate that PCM maintains more stable temperature in the foodstuffs inside the refrigerator. This reduction of temperature fluctuation ultimately improves the quality of preserved food.     

Real‐Time Analysis of Energy Generation of a Photovoltaic System Installed in the City of Lajeado,Rio Grande do Sul

Considering successive and costly increases in electricity rates, this article evaluates the generation of electricity from a photovoltaic system using solar energy, a renewable source. The solar photovoltaic system is installed at UNIVATES University Center, a public university in the state of Rio Grande do Sul, Brazil, and it is also connected to the electrical grid. Data related to the climatic conditions of the location, such as incident solar radiation, rainfall, and mean temperature, were obtained during the system's evaluation period and used along with bibliographic research on similar systems installed in southern Brazil. Our study quantified the energy produced over one calendar year (2014) and related it to the climatic variables and the conversion efficiency achieved by the system's photovoltaic modules. Our results show that there is both a strong relationship between the production of energy and climatic conditions and that the city, Lajeado, and the Brazilian state of Rio Grande do Sul, have good potential to supply energy using photovoltaic systems connected to the electrical grid. The horizontal global solar radiation average obtained in the study location was 4.14 kilowatts per square meter per day (kWh/m²/day), and the average monthly production of energy reached 243.93 kWh/m²/month, with a total of 2,927.10 kWh produced in 2014, achieving a monthly average conversion efficiency of 11.07%. This conversion efficiency is close to the value of 12.6% obtained in 2013 in a similar study of the same solar photovoltaic system conducted over a shorter time period.     

A comparative study of trace metals in male and female Caspian kutum (<Emphasis Type="Italic">Rutilus frisii kutum</Emphasis>) from the southern basin of Caspian Sea

This study focuses on the extent of zinc (Zn), copper (Cu), cadmium (Cd), cobalt (Co), manganese (Mn), lead (Pb), mercury (Hg), and arsenic (As) bioaccumulation in edible muscles of Caspian kutum (Rutilus frisii kutum), in both male and female sexes at Noor and Babolsar coastal regions from the southern basin of Caspian Sea. These values were compared with the WHO and the UNFAO safety standards regarding the amount of the abovementioned heavy metals in fish tissues (mg/kg ww). Results showed that the accumulation of these elements (except for Zn) was not significantly different between sexes of male and female in Babolsar coastal regions (P?>?0.05). In the other hand, accumulation of Hg and As at edible muscles of Caspian kutum has significant difference between two sexes of male and female in Noor coastal regions (P?<?0.05), the female had higher concentration than the male. Furthermore, it was not significantly correlated with sex and rivers in length and weight of fish (R ²?<?0.50; P?>?0.05). Based on the results, the concentration of heavy metals in the studied fish tissues proved to be significantly lower than international standards (P?<?0.05), so its consumption is not a threat to the health of consumers.     

Performance and emission study of biodiesel from leather industry pre-fleshings

The possible use of pre-fleshing wastes from tanneries in the production of biodiesel fuel was examimed in our previous study in 2005. In this study, engine performance and emission values of biodiesel obtained from these wastes have been investigated and compared to petrodiesel fuel. The test results demonstrated that although the wheel force and power of biodiesel fuel is slightly lower than petrodiesel and the acceleration periods are accordingly longer, the emission values of hydrocarbons and particulate matter were found to be considerably lower with biodiesel. Thus, it has been shown that a waste byproduct can be utilized in the production of an environmentally friendly fuel, which can be used in some diesel engines without a need for major adjustment, providing economic and ecological benefits.     

Assessment of some trace heavy metals and radioactivity concentration in water of Bendimahi River Basin (Van, Turkey)

The levels of heavy metals were determined in the water of Bendimahi River Basin, statistically analysed and compared to natural gross radioactivity concentration. Fifteen samples of water were collected from Bendimahi River and Van Lake for two seasons in 2005. Water samples were analyzed for eight trace elements and concluded together with gross-alpha and gross-beta radioactivity concentrations. Atomic absorption spectrometry (AAS) was used to determine the concentrations of heavy metals in water samples collected from Bendimahi River basin. Correlation analysis was made for radioactivity and heavy metal concentrations and the Pearson correlation coefficients between gross-alpha and gross-beta radioactivity and heavy metal were determined. The concentrations of all metals were found to be higher than WHO, EC, EPA and TSE-266 guidelines for drinking water, except for Zn and Cu. Generally, the heavy metal concentrations in water samples obtained in May and in August were found to be in sequence of Fe>Zn>Pb>Cr>Cu>Mn>Co>Cd and Fe>Zn>Cu>Pb>Cr>Mn>Co>Cd, respectively. The gross-alpha and gross-beta activity concentration varies between 0.063 and 0.782, 0.021 and 0.816 Bq l(-1) in samples collected in May, and 0.009 and 0.037, 0.081 and 3.116 Bq l(-1) in samples collected in August.     

Problems caused by land-misuse; the sample of Erzurum

In especially urban areas and their proximity, environmental pollution has reached a level which threatens both people and public health. Although environmental problems in Turkey have been studied for many cities, including Erzurum, no study is present combining all the environmental matters of the city with short definitions of problems it faces, therefore, this study attempts to reveal the definition of the scope and problem of pollution and land use problems in Erzurum and use of studies from developing cities elsewhere in the world for comparison of methods and solutions.     

Gross alpha and beta radioactivity concentration in water, soil and sediment of the Bendimahi River and Van Lake (Turkey)

The concentrations of the natural radioactivity in water, soil and sediment samples collected from Bendimahi River which originates near the Tendürek Mountain (Van, Turkey), its tributaries and Van Lake (Turkey) were measured. The gross-alpha and gross-beta radioactivity concentrations were investigated in May and August in 2005. Determination of the gross-alpha and gross-beta radioactivity of river water, soil and sediment samples was obtained by using gas-flow proportional counter, PIC-MPC 9604-alpha/beta counter. In water samples, the obtained results show that in May; gross-alpha and gross-beta activity concentrations varied between 0.063-0.782 and 0.021-0.816 Bq l(-1) and in August the values were 0.009-0.037 and 0.081-3.116 Bq l(-1), respectively. The gross-alpha and gross-beta activity concentrations in soil samples ranged from 0.800 to 4.277 Bq g(-1) and 0.951 to 11.773 Bq g(-1) in May and 0.686 to 4.713 Bq g(-1) and 0.073 to 9.524 Bq g(-1) in August, respectively. Concentrations ranging from 0.782 to 4.596 Bq g(-1) and from 0.482 to 10.372 Bq g(-1) in May and from 0.580 to 5.824 Bq g(-1) and from 0.303 to 9.702 Bq g(-1) in August for gross-alpha and gross-beta radioactivity were observed in sediments, respectively.     

A simple extraction procedure for determination of total mercury in crude oil

The determination of mercury in crude oil and petroleum products is particularly difficult due to the volatile nature of both mercury and the matrix, which may lead to significant loss of the analyte. A simple extraction method for total mercury has been developed to determine total mercury in crude oil using cold vapor atomic fluorescence spectrometry. The homogenized crude oil sample was diluted to 5, 10, and 20 % (w/w) in toluene. The diluted crude oil samples were spiked with 10 and 40 μg/kg (w/w). The samples were extracted using an oxidant/acid solution, BrCl/HCl. The mercury was extracted into the aqueous phase; the ionic mercury was then reduced to volatile elemental mercury (Hg⁰) by stannous chloride (SnCl₂). The mercury vapor was detected by Merlin cold vapor atomic fluorescence spectrometry at a 253.7-nm wavelength. The average recoveries for mercury in spiked diluted crude oil (10 and 40 μg/kg, w/w) were between 96 and 103 %, respectively, in 5 and 10 % spiked diluted crude oil. Whereas, low recoveries (<50 %) were recorded in 20 % diluted spiked crude oil. The method detection limit was calculated as t _{(0.01)(n ? 1)}?×?SD where t is the student's value for 99 % confidence level and standard deviation estimate with n???1 degrees of freedom. The method detection limit was found to be 0.38 μg/kg based on 5 g of diluted crude oil sample. The method is sensitive enough to determine low levels of mercury in crude oil.