组合钢管混凝土式防屈曲支撑

由于河北省图书馆加固改造工程的实际需要,开发出了一种新型组合钢管混凝土式防屈曲支撑。该新型支撑解决了全钢型防屈曲支撑在大长度时难以满足稳定性的问题,而且比起传统钢管混凝土约束的防屈曲支撑,无需考虑内芯与混凝土之间的粘结力问题,加工过程简便、施工速度快,且质量容易控制。现已对此类新型支撑完成了短试件和足尺试件的拟静力滞回性能试验,试验结果表明,新型支撑的滞回曲线饱满稳定,整体稳定性和局部稳定性较好,满足工程要求。     

沉积物与土壤有机质化学发光分析技术研究

文章提出了一种新的快速、现场分析沉积物和土壤中有机质含量以及组成特征的方法。该方法的提出建立在臭氧与沉积物和土壤中有机质发生氧化反应过程中会产生化学发光现象基础上。研究发现,不同沉积物和土壤样品由于组成结构不同,所产生的化学发光动力学曲线具有明显特异性差异。利用这种差异,通过原理试验样机所获取的样品化学发光动力学曲线,文章针对沉积物和土壤中有机质进行了初步的定量、定性含量研究,并结合现有检测方法,验证了臭氧氧化发光分析方法分析沉积物和土壤中有机质的可行性。根据实验中得到的不同沉积物和土壤样品化学发光动力学曲线具有很大信息差异的现象,进一步提出了建立沉积物和土壤中有机质特征编码"有机质指纹"的概念。     

垂直流人工湿地处理稠油废水的实验研究

采用垂直流人工湿地模拟装置对新疆油田外排含盐稠油废水进行了处理。实验表明:对于进水CODCr为402～406mg/L,盐度5701～5712mg/L,石油类40.62mg/L的含盐稠油废水,该系统的出水指标为CODCr35～38mg/L,盐度1535～1542mg/L,湿地系统对CODCr和盐分的去除率达到91%和73%;当水力停留时间为11d以上,出水石油类<5mg/L,处理后出水CODCr、石油类达到《污水综合排放标准》(GB8978-1996)的一级标准。     

机柜振动、冲击响应特性的试验研究

机柜是设备的安装架,当其受到某一安装平台的振动与冲击作用后,随着安装位置的不同,机柜内安装的单元设备所经受的振动、冲击量值和谱型也有很大不同。因此对于单元设备的振动、冲击考核条件不应等同于整系统的要求,而应该根据其安装平台的响应制定。     

隧道半横向排烟模式下不同排烟口分布的温度场数值模拟研究

结合某过江盾构隧道,基于三维流体动力学模拟仿真软件平台,建立三维仿真模型,研究火灾发生在隧道盾构段典型区段时,排烟开口在火源上下游不同的分布模式时烟气层的温度场分布。通过分析模拟结果可知:随着火源上游排烟开口逐步增加,火源上游烟气逆流长度和蔓延速度都相对稳定而后又逐步增长,火源下游的烟气蔓延长度先减小而后又基本趋于稳定,下游烟气沉降高度则有所升高;火源位置处正上方温度则随着上游排烟开口的个数逐步增加而逐渐升高。而从其他的排烟开口变化模式模拟结果可知:随着排烟开口面积或者开口间距的逐步增大,烟气蔓延的速度先增加而后又逐步减小,且开口间距为30m左右时烟气蔓延速度相对较慢;排烟开口宽高比对烟气蔓延影响较小。所获得的结论将有助于相关类型工程的设计和管理。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

[HPMo][OTAC]2/SiO2的制备及其催化柴油氧化脱硫的研究

采用溶胶-凝胶法制备不同负载量的[HPMo][OTAC]2/SiO2,通过红外光谱、比表面积和孔结构分析对[HPMo][OTAC]2/SiO2进行表征,考察负载量、催化剂用量、氧化剂用量、反应温度和反应时间对模拟柴油脱硫效果的影响。结果表明,掺杂后的催化剂保持了Keggin结构,[HPMo][OTAC]2/SiO2在最佳反应条件下,苯并噻吩的脱除率达到48.3%,二苯并噻吩的脱除率达到67.2%。     

Acute toxicity tests with Daphnia magna, Americamysis bahia, Chironomus riparius and Gammarus pulex and implications of new EU requirements for the aquatic effect assessment of insecticides

Threshold concentrations for treatment related effects of 31 insecticides, as derived from aquatic micro-/mesocosm tests, were used to calibrate the predictive value of the European Tier-1 acute effect assessment on basis of laboratory toxicity tests with Daphnia magna, Chironomus spp., Americamysis bahia and Gammarus pulex. The acute Tier-1 effect assessment on basis of Daphnia (EC(50)/100) overall was protective for organophosphates, carbamates and most pyrethroids but not for neonicotinoids and the majority of insect growth regulators (IGRs) in the database. By including the 28-day water-spiked Chironomus riparius test, the effect assessment improves but selecting the lowest value on basis of the 48-h Daphnia test (EC50/100) and the 28-day Chironomus test (NOEC/10) is not fully protective for 4 out of 23 insecticide cases. An assessment on basis of G. pulex (EC(50)/100) is sufficiently protective for 15 out of 19 insecticide cases. The Tier-1 procedure on basis of acute toxicity data (EC(50)/100) for the combination of Daphnia and A. bahia and/or Chironomus (new EU dossier requirements currently under discussion) overall is protective to pulsed insecticide exposures in micro-/mesocosms. For IGRs that affect moulting, the effect assessment on basis of the 48-h Chironomus test (EC(50)/100) may not always be protective enough to replace that of the water-spiked 28-day C. riparius test (NOEC/10) because of latency of effects.     

Operational leeway in work situations: do ergonomic risk assessment tools consider operational leeway for job analysis?

Our study shows that information on operational leeway is limited in the originator articles of the ergonomic risk assessment tools for prevention of musculoskeletal disorders (MSDs). The tools’ underlying theoretical models do not consider the indicators of operational leeway, and they cannot determine the sufficiency of the situational operational leeway in a work situation. Consequently, regulation of the activity, which ensures the performance goals and the individual's health, has been overlooked. The lack of literature on indicators of situational operational leeway is one of the reasons for this deficit. Defining the indicators for this concept would be an innovation in the approach of MSD risk prevention. Developing empirically the concept of situational operational leeway in risk assessment tools would help to progress the current approach of MSD prevention. This study therefore proposes indicators of situational operational leeway to increase the representativeness and reliability of the risk assessment tools for MSDs.     

化工火灾事故调查方法研究

为克服化工火灾调查中人为因素的影响,增强事故调查的科学性和准确性,在总结化工火灾现场特点的基础上,提出化工火灾事故调查时应遵循的假设推理法,通过证据收集、分析资料、建立假设、检验假设和选择假设,构建化工火灾事故调查的证据系统,包括实物证据,位置证据、文件证据和人证,从火灾动力学角度分析了火灾痕迹的影响因素。结果表明:假设推理法重视证据收集,综合使用归纳推理和演绎推理,有助于避免主观判断的影响;采用系统方法收集证据,扩大证据收集的范围,列举证据清单和优先考虑敏感性证据的方法有助于提高调查效率;火灾行为、材料的热响应和灭火行动对火灾痕迹的形成有直接影响,分析时应充分考虑,以免作出错误的判断。