Unemployment effects of climate policy

This paper models the unemployment effects of restrictions on greenhouse gas emissions, embodying two of the most significant types of short-term economic imperfections that generate unemployment: sectoral rigidities in labor mobility and sectoral rigidities in wage adjustments. A labor policy is also analyzed that would reduce the direct negative economic effects of the emissions restrictions.The politics of limiting greenhouse gas emissions are often dominated by relatively short-term considerations. Yet the current economic modeling of emissions limitations does not embody economic features that are likely to be particularly important in the short term, in particular, the politically sensitive unemployment rate. Moreover, only a few of these studies also consider policies that would offset the negative direct economic effects of emissions restrictions. For plausible estimates of the parameters, the model shows that, with the labor market imperfections, if there were no offsetting policies, the reductions in GNP in the U.S. in the first 10 years after emissions restrictions were imposed would be as much as 4%. However, if there were two policies, instead of just one: a counteracting labor market policy, as well as the emissions restrictions, the negative direct economic effects could be completely eliminated.     

Power matters in closing the phenotyping gap

Much of our understanding of physiology and metabolism is derived from investigating mouse mutants and transgenic mice, and open-access platforms for standardized mouse phenotyping such as the German Mouse Clinic (GMC) are currently viewed as one powerful tool for identifying novel gene-function relationships. Phenotyping or phenotypic screening involves the comparison of wild-type control mice with their mutant or transgenic littermates. In our study, we explored the extent to which standardized phenotyping will succeed in detecting biologically relevant phenotypic differences in mice generated and provided by different collaborators. We analyzed quantitative metabolic data (body mass, energy intake, and energy metabolized) collected at the GMC under the current workflow, and used them for statistical power considerations. Our results demonstrate that there is substantial variability in these parameters among lines of wild-type C57BL/6 (B6) mice from different sources. Given this variable background noise in mice that serve as controls, subtle phenotypes in mutant or transgenic littermates may be overlooked. Furthermore, a phenotype observed in one cohort of a mutant line may not be reproducible (to the same extent) in mice coming from a different environment or supplier. In the light of these constraints, we encourage researchers to incorporate information on intrastrain variability into future study planning, or to perform advanced hierarchical analyses. Both will ultimately improve the detectability of novel phenotypes by phenotypic screening. Carola W. Meyer and Ralf Elvert contributed equally to this work.     

A participatory approach to the establishment of a baseline scenario for a reforestation Clean Development Mechanism project

This paper is part of a two-year study to investigate the feasibility of initiating a Clean Development Mechanism (CDM) project in an indigenous community of Eastern Panamá, Ipetí-Emberá. We use participatory mapping and matrices as well as household surveys to develop a land-use/land-cover baseline scenario and examine the role of local participation in assessing land-use change. In Ipetí, land-use change has not occurred in a linear way over the last decades, and our data unveils socio-economic factors as potential key drivers of change. The concordance that we observed between geographic information and individual and collective perceptions of land-use change substantiates the possibility of using local knowledge in the establishment of baseline data for CDM projects. Our calculations suggest that the total carbon (C) stocks in the Tierra Colectiva (TC) of Ipetí-Emberá in 2004 represents a 47% reduction from the estimated C stock at the onset of settlement in the early 1970’s. Results from the participatory assessments predict that, in 2024 and in absence of a CDM project, the C stocks will decline from 301,859 t C in 2004 to 155,730 t C, which constitutes a reduction of 52%. The scenario with CDM estimates C stocks of 305,853 t C for 2024, a value slightly superior to the 2004 value. In the TC there is ground to believe that cattle ranching is likely to become an ever more important activity as the population is young and growing and cannot easily move elsewhere. Forests tend to be cleared for cultivation while pastures are established on short fallows. Our baseline scenario underlines the potential for a CDM project to make a significant difference in the future C stocks of this landscape.     

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

The development and implementation of a microstructure-based finite element model for the machining of carbon fiber-reinforced polymer composites is presented. A new approach to interfacial modeling is introduced where the material interface is modeled using continuum elements, allowing failure to take place in either tension or compression. The model is capable of describing the fiber failure mode occurring throughout the chip formation process. Characteristic fiber length in the chips, and machining forces for microstructures with fibers orientated at 0°, 45°, 90°, and 135° are examined. For model validation purposes, the model-based machining performance predictions are compared to the machining responses from a set of orthogonal machining experiments. A parametric study is presented that identifies a robust tool geometry, which minimizes the effects of fiber orientation and size on the machining forces.     

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Tool life has been a vital issue in machining titanium alloys. Recently, an atomization-based cutting fluid (ACF) application has been found to be an effective approach for cooling and lubrication in micromachining operations. In this study, an ACF spray system is developed for macro-scale turning of Ti–6Al–4V. The spray system is designed to minimize interaction between the fluid droplets, and the gas nozzle to control the divergence of the fluid droplets. Experiments are conducted to study the effect of five specific ACF spray parameters including fluid flow rate, spray distance, impingement angle, and type and pressure level of the droplet carrier gas on cutting forces, tool life, and chip characteristics. It has been observed that the combination of lower pressure (150 psi) air-mixed CO₂ with a higher flow rate (20 ml/min) and a larger spray distance (35 mm) produces a significantly longer tool life and broken chips. The results also reveal that the ACF spray system can extend tool life up to 40–50% over flood cooling.     

Do spotless starlings place feathers at their nests by ultraviolet color?

A considerable number of bird species carry feathers to their nests. Feathers’ presence in the nests has traditionally been explained by their insulating properties. Recently, however, it has been suggested that feathers carried to the nests by females of the spotted starling (Sturnus unicolor L.) could have an ornamental function based on their ultraviolet (300–400 nm) and human-visible longer wavelength (400–700 nm) coloration. In our population, 95.7% of feathers found inside next-boxes occupied by nesting starlings were rock dove fly feathers. Of these feathers, 82.7% were naturally positioned with their reverse side oriented toward the entrance hole and 42.4% of all found feathers were situated within the nest-cup. Here we experimentally assess the signaling function of ultraviolet coloration of feathers in nests of spotless starlings by providing nests with a number of pigeon flight feathers that were respectively treated on their obverse, reverse, both, or neither side with a UV blocker. Starlings placed 42.5% of the experimental feathers in the nest-cup irrespective of the UV block treatment. Orientation of feathers toward the entrance hole was not related with their ultraviolet radiation. However, feathers placed within the nest-cup were more likely found with their reverse side oriented toward the entrance hole confirming our correlative findings. These results suggest a minor role of ultraviolet coloration on feather location by spotless starlings.     

An Integrated Assessment of Climate Change and the Accelerated Introduction of Advanced Energy Technologies - An Application of MiniCAM 1.0

We report results from the application of an integrated assessment model, MiniCAM 1.0. The model is employed to explore the full range of climate change implications of the successful development of cost effective, advanced, energy technologies. These technologies are shown to have a profound effect on the future magnitude and rate of anthropogenic climate change. We find that the introduction of assumptions developed by a group of ‘bottom-up’ modelers for the LEESS scenarios into a ‘top-down’ model, the Edmonds-Reilly-Barns Model, leads to ‘top down’ emissions trajectories similar to those of the LEESS. The cumulative effect of advanced energy technologies is to reduce annual emissions from fossil fuel use to levels which stabilize atmospheric concentrations below 550 ppmv. While all energy technologies play roles, the introduction of advanced biomass energy production technology is particularly important. The consideration of all greenhouse related anthropogenic emissions, and in particular sulfur dioxide, is found to be important. We find that the consideration of sulfur dioxide emissions coupled to rapid reductions in carbon dioxide emissions leads to higher global mean temperatures prior to 2050 than in the reference case. This result is due to the short-term cooling impact of sulfate aerosols, which dominates the long-term warming impact of CO₂ and CH₄ in the years prior to 2050. We also show that damage calculations which use only mean global temperature and income may be underestimating damages by up to a factor of five. Disaggregating income reduces this to a factor of two, still a major error. Finally, the role of the discount rate is shown to be extraordinarily important to technology preference.     

Foreword

Mitigation and Adaptation Strategies for Global Change -     

Tolerance of Chrysantemum maximum to heavy metals: The potential for its use in the revegetation of tailings heaps

To find if ornamental plants are applicable to the remediation of metal-polluted areas, the tolerance of chrysanthemum plants (Chysanthemum maximum) var. Shasta to different metals under hydroponic conditions was studied. Their responses as influenced by the mycorrhizal fungus Glomus mosseae (Nicol. & Gerd.) Gerdemann & Trappe BEG25 on substrates containing mine residues were also investigated. Our results showed that chrysanthemum is a metal-tolerant plant under hydroponic conditions, plants behaving as Pb-excluders, whereas Cd, Cu and Ni were accumulated in roots. Low accumulation in flowers was observed for Cd and Cu but it was concentration-dependent. Ni and Pb were not translocated to flowers. Shoot biomass was not significantly affected by the different rates of mine residue addition for both mycorrhizal and non-mycorrhizal plants. Mycorrhizal plants accumulated less Pb and Cu in both shoots and roots than non-mycorrhizal plants. Chysanthemum could be a prospective plant for revegetation of tailings and the use of inoculation may decrease plant metal accumulation in polluted soils.