High-level arsenite removal from groundwater by zero-valent iron

The objectives of this study were to conduct batch and column studies to (i) assess the effectiveness of zero-valent iron for arsenic remediation in groundwater, (ii) determine removal mechanisms of arsenic, and (iii) evaluate implications of these processes with regard to the stability of arsenic and long-term remedial performance of the permeable reactive barrier (PRB) technology. A high concentration arsenic solution (50 mg l(-1)) was prepared by using sodium arsenite (arsenic (III)) to simulate groundwater at a heavily contaminated Superfund site in the USA. Batch studies indicate that the removal of arsenic is a two-step reaction with fast initial disappearance of arsenite followed by a slow subsequent removal process. Flow-through columns were conducted at a flow rate of 17 ml h(-1) under reducing conditions for 6.6 mo. Kinetic analysis suggested that arsenic removal behaves as a zero-order reaction at high arsenic concentrations. Arsenic removal rate constants decreased with time and arsenic breakthrough was observed in the column study. Arsenic removal capacity of zero-valent iron was determined to be approximately 7.5 mg As/g Fe. Carbonate green rust was identified from the analysis of surface precipitates; arsenite uptake by green rust may be a major mechanism responsible for arsenic remediation by zero-valent iron. Analysis of HCl-extractable arsenic from iron samples indicated that approximately 28% of arsenic was in the form of arsenate suggesting that a surface oxidation process was involved in the arsenic removal with zero-valent iron.     

Biodegradation of juvenoid diastereoisomers: radio-HPLC and MS analysis

Microbial degradation of two diastereoisomeric forms 2 and 3 of a selected juvenoid (insect juvenile hormone bioanalog), ethyl N-{2-{4-[(2-hydroxycyclohexyl)methyl]phenoxy}ethyl}carbamate was studied and the degradation products analyzed. Degradation experiments were performed using simple modeling under laboratory conditions. A Candida sp. strain T1, isolated from soil, was chosen as a biodegradation species. Radiolabeling of the studied compounds 2 and 3 was used in combination with radio-HPLC and MS analysis to increase the limits of detection, monitoring and isolation of trace quantities of the products of degradation and/or transformation. Resulting from the microbial processes using 2 or 3 as source compounds, three identical products (4-6) of their biodegradation were produced. Compound 2 also afforded two additional products (7, 8). Radio-HPLC analysis and separation, and subsequent MS analysis of the degradation mixtures resulted in identification of the degradation products. The degree and the rate of biodegradation of 2 and 3 were analyzed after 1, 3 and 7 days from the beginning of the experiment.     

Feral swine disturbance at important archaeological sites

Feral swine are well known as environmentally destructive invasive animals in many areas around the world, where they degrade native habitats, harm rare plant and animal species, damage agricultural interests, and spread disease. We provide the first quantification of their potential as agents of disturbance at archaeological sites. Our study was conducted in south-central Florida at Avon Park Air Force Range, a base comprising over 40,000 ha and containing many archaeological sites. To determine the identifiable prevalence of feral swine disturbance, we examined 36 sites registered with the Florida State Historic Preservation Office and also eligible for inclusion in the National Register of Historic Places (NRHP). Moreover, we evaluated the extent of swine disturbance at a prehistoric site of extraordinary significance to Florida’s prehistory, “Dead Cow.” Fifteen of the 36 NRHP-eligible sites (42 %) had some level of swine disturbance, including 14 of 30 (47 %) sites known to have artifacts within 20 cm of the surface (well within swine rooting depths). At the Dead Cow site, we documented disturbance at 74 % of shovel test points. Sites with shallow artifact depositions appeared highly vulnerable to disturbance by feral swine, threatening destruction of artifact stratigraphy and provenience. Our observations likely are a minimal representation of accumulated damage. These irreplaceable sites tell the area’s land use story across the millennia. That they are under threat from feral swine should serve broad notice of potential threats that feral swine may pose to archaeological sites globally, making effective swine management imperative for site protection.     

Simulation of pesticide runoff at Rosemaund Farm (UK) using the SoilFug model

A validation exercise of the SoilFug model using field runoff data from Rosemaund Farm (UK) is described. A comparison has been made of modelled and measured concentrations of several pesticides in surface water and soil during and after specific rain events following application. The field experiments were designed to obtain data on rainfall, outflows of water, pesticide application rates and concentrations in soil and water. The results were satisfactory for the undissociated pesticides (atrazine, carbofuran, dimethoate, isoproturon, lindane, simazine and trifluralin), whose concentrations in water were mostly predicted within an order of magnitude of measured data. The results for the dissociated pesticides (dichlorprop, MCPA, mecoprop) were less satisfactory, giving generally much higher predicted concentrations in water. The use of the SoilFug model is suggested for the calculation of predicted environmental concentrations (PECs) in water, since it generally produces acceptable results from a relatively small set of input data, most of which is generally available.     

Use of (15)N-labelled nitrogen deposition to quantify the source of nitrogen in runoff at a coniferous-forested catchment at Gårdsjön, Sweden

To determine the source of dissolved inorganic nitrogen (N) in runoff, approx. 35kg N enriched with the stable isotope (15)N (2110 per thousand delta(15)N) was added to a mature coniferous forested catchment for one whole year. The total N input was approx. 50kg ha(-1) year(-1). The enrichment study was part of a long-term whole-catchment ammonium nitrate addition experiment at G?rdsj?n, Sweden. The (15)N concentrations in precipitation, throughfall, runoff and upper forest floor were measured prior to, during, and 3-9years following the (15)N addition. During the year of the (15)N addition the delta(15)N level in runoff largely reflected the level in incoming N, indicating that the leached NO(3)(-) came predominantly from precipitation. Only 1.1% of the incoming N was lost during the year of the tracer addition. The cumulative loss of tracer N over a 10-year period was only 3.9% as DIN and 1.1% as DON.     

Kinetics of chemoheterotrophic microbially mediated reduction of ferric EDTA and the nitrosyl adduct of ferrous EDTA for the treatment and regeneration of spent nitric oxide scrubber liquor.

Biomass from a prototype reactor was used to investigate the kinetics of chemoheterotrophic reduction of solutions of ferric ethylenediaminetetraacetic acid (EDTA) and solutions containing the nitrosyl adduct of ferrous EDTA using ethanol as the primary electron donor and carbon source. A series of batch experiments were conducted using biomass extracted from the scrubber solution treatment and regeneration stage of a prototype iron EDTA-based unit process for the absorption of nitric oxide with subsequent biological treatment. Using a linear-sweep voltammetric method for analysis of the ferric EDTA concentration, iron-reducing bacteria were found to behave according to the Monod kinetic model, at initial concentrations up to 2.16 g chemical oxygen demand (COD) as ethanol per liter, with a half-velocity constant of 0.532 g COD as ethanol/L and a maximum specific utilization rate of 0.127 mol/L of ferric ethylenediamine-tetraacetic acid [Fe(III)EDTA]*(g volatile suspended solids [VSS]/L)d(-1). Based on batch analyses, biomass yield and endogenous decay values of iron-reducing bacteria were estimated to be 0.055 g VSS/g COD and 0.017 L/d, respectively. An average of 1.64 times the theoretical (stoichiometric) demand of ethanol was used to complete reduction reactions. Kinetics of the reduction of the nitrosyl adduct of ferrous EDTA are summarized by the following kinetic constants: half-velocity constant (Ks) of 0.39 g COD/L, maximum specific utilization rate (k) of 0.2 mol/L [NO x Fe(II)EDTA(2-)](g VSS/L)d(-1), and inhibition constant (K(I)) of 0.33 g COD/L, as applied to the modified Monod kinetic expression described herein. Based on batch analyses, the biomass yield of nitrosyl-adduct-reducing bacteria was estimated to be 0.259 g VSS/g COD, endogenous decay was experimentally determined to be 0.0569 L/d, and an average of 1.26 times the stoichiometric demand of ethanol was used to complete reduction reactions.     

Information processing style and decision making

Information processing style, often termed cognitive style, has gained prominence in the organizational behavior literature as researchers use it as a basis for studying decision making behavior, conflict, strategy development, and group processes. However, the many operational definitions and measures of cognitive style have produced inconsistent and confusing results. This study tested the interrelationship among four measures of this construct: the Myers–Briggs Type Indicator, the Group Embedded Figures Test, the Learning Styles Inventory, and the Decision Style Inventory. Measures that appeared to be conceptually linked through their underlying theories were compared. Results indicate that the various measures are not strongly interrelated and appear to be measuring different aspects of information processing and decision making. Copyright © 1999 John Wiley & Sons, Ltd.     

The impact of a nationwide effort to reduce airbag-related deaths among children: an examination of fatality trends among younger and older age groups

INTRODUCTION: The purpose of this study was to examine the impact of a nationwide response to emerging airbag-related deaths among children. This response, implemented in 1996, focused on moving children to a rear seat and increasing proper restraint usage. METHOD: Fatality trends from 1992 through 1996 and from 1996 through 2003 were examined for younger children (ages 0-3) and for older children (ages 4-12). RESULTS: Prior to 1997, a steady reduction in unrestrained deaths (among younger children) was offset by increases in restrained deaths (among younger and older children), increases in rear-seat deaths (among younger children), and increases in front-seat deaths (among older children). After 1996, there were significant decreases in fatalities in both age groups, with larger and more immediate reductions among the younger children. The largest reductions were immediately after 1996, when younger-child deaths declined by 16%, and after 1999, when deaths among both age groups declined by about 16%. CONCLUSIONS: The immediate reduction in front-seat deaths among younger children, particularly infants, appears to have been closely associated with the nationwide public information efforts implemented in 1996. Later reductions in front-seat and unrestrained deaths, among both younger and older children, were likely associated with the combination of legislative, enforcement, and public information programs, which increased after 1999. IMPACT ON INDUSTRY: The findings suggest that a large expenditure of resources by public and private-sector organizations after 1996 resulted in the prevention of hundreds of deaths among young children. In addition, the results provide insights with regard to the categories of deaths most affected by such programs and issues that deserve additional attention.     

Comparing computing formulas for estimating concentration ratios

The purpose of this paper is to provide guidance on the choice of computing formulas (estimators) for estimating average concentration ratios and other ratio-type measures of radionuclides and other environmental contaminant transfers between ecosystem components. Mathematical expressions for the expected value of three commonly used estimators (arithmetic mean of ratios, geometric mean of ratios, and the ratio of means) are obtained when the multivariate lognormal distribution is assumed. These expressions are used to explain why these estimators will not in general give the same estimate of the average concentration ratio. They illustrate that the magnitude of the discrepancies depends on the magnitude of measurement biases, and on the variance and correlations associated with spatial heterogeneity and measurement errors. This paper also reports on a computer simulation study that compares the accuracy of eight computing formulas for estimating a ratio relationship that is constant over time and/or space. Statistical models appropriate for both controlled spiking experiments and observational field studies for either normal or lognormal distributions are considered. Our results indicate that for either type of study the geometric mean is generally preferred if the lognormal distribution applies. However, the geometric mean has the disadvantage that its expected value depends on n, the number of measurements taken. Ricker's estimator, $\text{R}\text{?}{}_{\mathrm{rt}}$, appears to perform worse than the other estimators studied when the observations are lognormal. All eight estimators appear to be equally accurate for the controlled spiking study when data are normally distributed. For observational field studies when data are normally distributed the ratio of means or slight modifications thereof are preferred to other estimators investigated. Before one chooses a computing formula for estimating a concentration ratio, thought should be given to what target value needs to be estimated to satisfy study objectives, and to whether the normal or lognormal distribution is a more realistic model. The geometric mean performs well for lognormal distributions, but comparison of geometric means or of a geometric mean with environmental limits can be misleading if n is small. The arithmetic mean of ratios is a conservative choice in that it will always give a larger estimate than will the geometric mean. It may also be severely biased when data are lognormal and the variances of measurement errors are large. The ratio of the means is a reasonable choice if the distribution is normal. The median of the observed ratios, $\text{R}\text{?}{}_{\mathrm{<mtext>md</mtext>}}$, is useful estimate since it is easily obtained and has an easily understood interpretation as the point above which and below which 50% of the observed ratios lie. Also, it is appropriate no matter what the distribution of the observed ratios may be. Confidence limits on the median are also easily obtained. Finally, while this paper emphasizes applications in radionuclide research, our results should be applicable to a wide range of environmental contaminants since many contaminants have approximately lognormal distributions.     

Objectives and status of fabric filter performance study

In October 1977, Southwestern Public Service Company executed a contract with the U.S. Environmental Protection Agency that called for a study to assess the performance of a fabric filter system installed on a large utility boiler that utilizes low sulfur Western coal. The project is now into its second year and the objectives of this paper are to describe the scope and intent of the study, as well as to report progress to date. In addition, some of the difficulties that we have encountered are discussed. Although some of these problems have resulted in procedural changes, the intent of the study has not been altered. This paper describes work being done in specific areas with which both the EPA and Southwestern are connected. These include fabric assessment, data collection, selection and installation of instrumentation, and overall fabric filter system performance. Results of the first performance test are also reviewed and the installation of a pilot baghouse is discussed.