The effects of opening an artificial tidal inlet on hydrography and estuarine macrofauna in Corpus Christi, Texas

Packery Channel is part of a complex of storm washover channels which, before 1912, have opened intermittently, linking the Laguna Madre and Corpus Christi Bay, Texas with the Gulf of Mexico. On 21 July 2005, with the assistance of Hurricane Emily, Packery Channel was prematurely opened to the Gulf of Mexico, months before construction of a dredged channel was scheduled to be completed. A before-versus-after, control-versus-impact (BACI) design was used to assess the effects of reopening Packery Channel on water quality and estuarine macrofauna in Mollie Beattie Coastal Habitat Community (MBCHC), Corpus Christi Bay. Two deep (approximately 1 m below m.s.l.) and two shallow (approximately 0.2 m below m.s.l.) stations were sampled monthly for physical and biological characteristics at both control and impact sites between November 2003 and March 2009. The opening of Packery Channel created a unique situation where salinities decreased after the channel opening by ameliorating hypersalinity in Laguna Madre rather than increasing salinities as would occur in most estuaries worldwide. Salinity also fluctuated in a diurnal pattern after the opening of Packery Channel. Apart from salinity, Packery Channel has caused little hydrographic change in MBCHC since opening in July 2005. There was little effect on the macrofaunal community composition. There was a greater difference in community composition between deep and shallow stations than between either before and after or control and impact sites. There have been no significant changes in abundance, biomass, or N1 diversity caused by the opening of Packery Channel.     

Framework for participative reflection on the accomplishment of transdisciplinary research programs

In response to the increasingly complex social–ecological issues facing society, there is a growing trend to conduct environmental research in large collaborative programs. This approach is described as transdisciplinary research as it transcends formal disciplinary boundaries, explicitly acknowledges that many different perspectives are relevant to the resolution of complex problems, and actively involves the users of research. This poses challenges for the evaluation of “impact” as any evaluation process must take into consideration the different expectations, values, culture, language and reward structures of the main participating groups, the funders, researchers and end users. How can these participating groups learn about the progress of a transdisciplinary research program in a way that is purposeful and structured, continues through the life of the program, and includes explicit feedback mechanisms that facilitate adaptation during the course of the program? This paper presents a framework for co-reflecting on the accomplishment of transdisciplinary research programs. The framework incorporates the perspectives of funders, researchers and users, and recognizes that while they place different emphasis on measures of achievement such as efficiency, rigor and relevance, ultimate accomplishment in terms of translating knowledge into practice requires that the needs and expectations of all three groups are adequately addressed. What emerges from the framework is the importance of early investment in processes, behaviors and relationships that foster social learning and the co-production of the knowledge and understanding that are required to ensure relevance; while maintaining emphasis in the traditional areas of formally testing evidence and mentoring young researchers to ensure rigor and build confidence and capacity in transdisciplinary approaches.     

Ionic composition of TSP and PM2.5 during dust storms and air pollution episodes at Xi'an,China

TSP and PM_2.5 samples were collected at Xi'an, China during dust storms (DSs) and several types of pollution events, including haze, biomass burning, and firework displays. Aerosol mass concentrations were up to 2 times higher during the particulate matter (PM) events than on normal days (NDs), and all types of PM led to decreased visibility. Water-soluble ions (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, F^?, Cl^?, NO₃^?, and SO₄^2?). were major aerosol components during the pollution episodes, but their concentrations were lower during DSs. NH₄⁺, K⁺, F^?, Cl^?, NO₃^?, and SO₄^2? were more abundant in PM_2.5 than TSP but the opposite was true for Mg²⁺ and Ca²⁺. PM collected on hazy days was enriched with secondary species (NH₄⁺, NO₃^?, and SO₄²) while PM from straw combustion showed high K⁺ and Cl^?. Firework displays caused increases in K⁺ and also enrichments of NO₃^? relative to SO₄^2?. During DSs, the concentrations of secondary aerosol components were low, but Ca²⁺ was abundant. Ion balance calculations indicate that PM from haze and straw combustion was acidic while the DSs samples were alkaline and the fireworks' PM was close to neutral. Ion ratios (SO₄^2?/K⁺, NO₃^?/SO₄^2?, and Cl^?/K⁺) proved effective as indicators for different pollution episodes.     

Bioaccessibility of trace elements as affected by soil parameters in smelter-contaminated agricultural soils: a statistical modeling approach

An investigation was undertaken to identify the most significant soil parameters that can be used to predict Cd, Pb, and Zn bioaccessibility in smelter-contaminated agricultural soils. A robust model was established from an extended database of soils by using: (i) a training set of 280 samples to select the main soil parameters, to define the best population to be taken into account for the model elaboration, and to construct multivariate regression models, and (ii) a test set of 110 samples to validate the ability of the regression models. Total carbonate, organic matter, sand, P(2)O(5), free Fe-Mn oxide, and pseudototal Al and trace element (TE) contents appeared as the main variables governing TE bioaccessibility. The statistical modeling approach was reasonably successful, indicating that the main soil factors influencing the bioaccessibility of TEs were taken into account and the predictions could be applicable for further risk evaluation in the studied area.     

Detecting diclofenac in livestock carcasses in India with an ELISA: a tool to prevent widespread vulture poisoning

Diclofenac, a non-steroidal anti-inflammatory drug (NSAID), has caused catastrophic vulture declines across the Indian sub-continent. Here, an indirect ELISA is used to detect and quantify diclofenac in 1251 liver samples from livestock carcasses collected across India between August 2007 and June 2008, one to two years after a ban on diclofenac manufacture and distribution for veterinary use was implemented. The ELISAs applicability was authenticated with independent data obtained using LC-ESI/MS. Of 1251 samples, 1150 (91.9%) were negative for diclofenac using both methods, and 60 (4.8%) were positive at 10-4348 and 10-4441 μg kg(-1) when analysed by ELISA and LC-ESI/MS, respectively. The residue level relationship in the 60 positive samples was highly significant (p < 0.001, r(2) = 0.644). Data suggest that this immunological assay could be used not only for cost effective sample screening, but also for residue level semi-quantification.     

Analysis and comparison of inertinite-derived adsorbent with conventional adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 degrees C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

Responses of Hyalella azteca and phytoplankton to a simulated agricultural runoff event in a managed backwater wetland

We assessed the aqueous toxicity mitigation capacity of a hydrologically managed floodplain wetland following a synthetic runoff event amended with a mixture of sediments, nutrients (nitrogen and phosphorus), and pesticides (atrazine, S-metolachlor, and permethrin) using 48-h Hyalella azteca survival and phytoplankton pigment, chlorophyll a. The runoff event simulated a 1 h, 1.27 cm rainfall event from a 16 ha agricultural field. Water (1 L) was collected every 30 min within the first 4 h, every 4 h until 48 h, and on days 5, 7, 14, 21, and 28 post-amendment at distances of 0, 10, 40, 300 and 500 m from the amendment point for chlorophyll a, suspended sediment, nutrient, and pesticide analyses. H. azteca 48-h laboratory survival was assessed in water collected at each site at 0, 4, 24, 48 h, 5 d and 7 d. Greatest sediment, nutrient, and pesticide concentrations occurred within 3 h of amendment at 0 m, 10 m, 40 m, and 300 m downstream. Sediments and nutrients showed little variation at 500 m whereas pesticides peaked within 48 h but at <15% of upstream peak concentrations. After 28 d, all mixture components were near or below pre-amendment concentrations. H. azteca survival significantly decreased within 48 h of amendment up to 300 m in association with permethrin concentrations. Chlorophyll a decreased within the first 24 h of amendment up to 40 m primarily in conjunction with herbicide concentrations. Variations in chlorophyll a at 300 and 500 m were associated with nutrients. Managed floodplain wetlands can rapidly and effectively trap and process agricultural runoff during moderate rainfall events, mitigating impacts to aquatic invertebrates and algae in receiving aquatic systems.     

Kinetics and pathways for the debromination of polybrominated diphenyl ethers by bimetallic and nanoscale zerovalent iron: effects of particle properties and catalyst

Polybrominated diphenyl ethers (PBDEs) are recognized as a new class of widely-distributed and persistent contaminants for which effective treatment and remediation technologies are needed. In this study, two kinds of commercially available nanoscale Fe⁰ slurries (Nanofer N25 and N25S), a freeze-dried laboratory-synthesized Fe⁰ nanoparticle (nZVI), and their palladized forms were used to investigate the effect of particle properties and catalyst on PBDE debromination kinetics and pathways. Nanofers and their palladized forms were found to debrominate PBDEs effectively. The laboratory-synthesized Fe⁰ nanoparticles also debrominated PBDEs, but were slower due to deactivation by the freeze-drying and stabilization processes in the laboratory synthesis. An organic modifier, polyacrylic acid (PAA), bound on N25S slowed PBDE debromination by a factor of three to four compared to N25. The activity of palladized nZVI (nZVI/Pd) was optimized at 0.3 Pd/Fe wt% in our system. N25 could debrominate selected environmentally-abundant PBDEs, including BDE 209, 183, 153, 99, and 47, to end products di-BDEs, mono-BDEs and diphenyl ether (DE) in one week, while nZVI/Pd (0.3 Pd/Fe wt%) mainly resulted in DE as a final product. Step-wise major PBDE debromination pathways by unamended and palladized Fe⁰ are described and compared. Surface precursor complex formation is an important limiting factor for palladized Fe⁰ reduction as demonstrated by PBDE pathways where steric hindrance and rapid sequential debromination of adjacent bromines play an important role.     

Flammability of hydrocarbon and carbon dioxide mixtures

The effect of carbon dioxide (CO₂) concentration on the ignition behaviour of hydrocarbon and CO₂ gas mixtures is examined in both jets and confined explosions. Results from explosion tests are presented using a 20 l explosion sphere and an 8 m long section of 1.04 m diameter pipeline. Experiments to assess the flame stability and ignition probability in free-jets are reported for a range of different release velocities. An empirically-based flammability factor model for free-jets is also presented and results are compared to ignition probability measurements previously reported in the literature and those resulting from the present tests.The results help to understand how CO₂ changes the severity of fires and explosions resulting from hydrocarbon releases. They also demonstrate that it is possible to ignite gas mixtures when the mean concentration is outside the flammable range. This information may be useful for risk assessments of offshore platforms involved in carbon sequestration or enhanced oil recovery, or in assessing the hazards posed by poorly-inerted hydrocarbon processing plant.