Single-laboratory evaluation and modification of U.S. EPA methods 7470 and 7471 for the determination of mercury in aqueous and solid hazardous wastes

The current U.S. Environmental Protection Agency (U.S. EPA) protocols for mercury determinations in aqueous and solid waste samples (SW-846 Methods 7470 and 7471) using recirculating cold-vapor atomic absorption spectrometry (CV-AAS) have been evaluated. The U.S. EPA methods are not sufficiently flexible to permit special quality control (QC) measures, have limited detectability for low-level mercury concentrations, and are plagued by spectral interferences caused by the nonspecific absorption of primary mercury radiation by volatile organic vapors. The U.S. EPA protocols have been modified in a single-laboratory study to facilitate additional QC measures, to enhance detectability for low-level mercury concentrations, and to eliminate nonspecific vapor absorption interferences. Volumetric manipulations for additional QC measures, if required, are facilitated by performing the sample digestions in Erlenmeyer flasks rather than in the current Biochemical Oxygen Demand (BOD) reduction-aeration bottles. Typical manipulations for additional QC measures that are now feasible include dilution of concentrated samples and multiple aliquot sampling for post-digestion spike and replicate analyses. Instrument detectability is improved 10-fold by using a gas sparging bottle as a dedicated reduction-aeration vessel and a silver wool-amalgamation CV-AAS system operated in an open configuration. The on-line amalgamation/thermal desorption process of the modified CV-AAS system eliminates interfering water and organic matrix vapors prior to the mercury absorption measurement. Good accuracy and precision have been obtained with the amalgamation CV-AAS system for the analyses of four reference sediment materials. The amalgamation CV-AAS measurements on the reference sediment digests have been successfully performed at absolute mercury concentration levels that are only 1 to 4 times above the instrumental detection limit of the U.S. EPA recirculating CV-AAS method.     

Aquaculture practices and potential human health risks: current knowledge and future priorities

Annual global aquaculture production has more than tripled within the past 15 years, and by 2015, aquaculture is predicted to account for 39% of total global seafood production by weight. Given that lack of adequate nutrition is a leading contributor to the global burden of disease, increased food production through aquaculture is a seemingly welcome sign. However, as production surges, aquaculture facilities increasingly rely on the heavy input of formulated feeds, antibiotics, antifungals, and agrochemicals. This review summarizes our current knowledge concerning major chemical, biological and emerging agents that are employed in modern aquaculture facilities and their potential impacts on public health. Findings from this review indicate that current aquaculture practices can lead to elevated levels of antibiotic residues, antibiotic-resistant bacteria, persistent organic pollutants, metals, parasites, and viruses in aquacultured finfish and shellfish. Specific populations at risk of exposure to these contaminants include individuals working in aquaculture facilities, populations living around these facilities, and consumers of aquacultured food products. Additional research is necessary not only to fully understand the human health risks associated with aquacultured fish versus wild-caught fish but also to develop appropriate interventions that could reduce or prevent these risks. In order to adequately understand, address and prevent these impacts at local, national and global scales, researchers, policy makers, governments, and aquaculture industries must collaborate and cooperate in exchanging critical information and developing targeted policies that are practical, effective and enforceable.     

Perfluoroalkyl carboxylates and sulfonates and precursors in relation to dietary source tracers in the eggs of four species of gulls (Larids) from breeding sites spanning Atlantic to Pacific Canada

In the present study, we identified and examined the spatial trends, sources and dietary relationships of bioaccumulative perfluorinated sulfonate (PFSA; C(6), C(8), and C(10) chain lengths) and carboxylate (PFCA; C(6) to C(15) chain lengths) contaminants, as well as precursor compounds including several perfluorinated sulfonamides, and fluorotelomer acids and alcohols, in individual eggs (collected in 2008) from four gull species [glaucous-winged (Larus glaucescens), California (Larus californicus), ring-billed (Larus delawarensis) and herring (Larus argentatus) gulls] from 15 marine and freshwater colony sites in provinces across Canada. The pattern of PFSAs was dominated by perfluorooctane sulfonate (PFOS; >89% of ΣPFSA concentration) regardless of egg collection location. The highest ΣPFSA concentrations were found in the eggs collected in the urbanized areas in the Great Lakes and the St. Lawrence River area [Big Chicken Island 308 ng/g ww, Toronto Harbour 486 ng/g ww, and Ile Deslauriers (HG) 299 ng/g ww]. Also, eggs from all freshwater colony sites had higher ΣPFSA concentrations, which were significant (p<0.05) in many cases, compared to the marine sites with the exception of the Sable Island colony in Atlantic Canada off the coast of Nova Scotia. C(6) to C(15) chain length PFCAs were detected in the eggs, although the pattern was variable among the 15 sites, where PFUnA and PFTrA dominated the pattern for most colonies. Like the ΣPFSA, the highest concentrations of ΣPFCA were found in the eggs from Big Chicken Island, Toronto Harbour, Ile Deslauriers (HG), and Sable Island, although not all freshwater sites had higher concentrations compared to marine sites. Dietary tracers [δ(15)N and δ(13)C stable isotopes (SIs)] revealed that PFSA and PFCA exposure is colony dependent. SI signatures suggested that gulls from most marine colony sites were exposed to PFCs via marine prey. The exception was the Mandarte Island colony in Pacific British Columbia, where PFSA and PFCA exposure appeared to be via terrestrial and/or freshwater prey consumption. The same was true for the freshwater sites where egg SIs suggested both aquatic and terrestrial prey consumption as the source for PFC exposure depending on the colony. Both aquatic (marine and freshwater) and terrestrial prey are likely sources of PFC exposure to gulls but exposure scenarios are colony-specific.     

Managing petroleum refining wastes by thermal desorption

The U.S. Environmental Protection Agency has developed regulations under the Hazardous and Solid Waste Amendments (HSWA) of 1984 to restrict the land disposal of hazardous wastes. As a result of the regulations, all hazardous wastes to be placed on the land must meet treatment standards based on the performance of the best demonstrated available technology (BDAT) identified for individual waste classifications. The Marathon Oil Company is currently evaluating innovative technologies for managing listed waste materials, with a focus on waste minimization and recycling. Remediation Technologies, Inc. (ReTeC) has conducted testing on wastewater treatment sludges from three Marathon refineries using a proprietary thermal desorption technology. The results from these tests have demonstrated that the technology has the ability to consistently meet BDAT treatment standards, while preferentially separating and condensing residual moisture and oils from the material.     

Evaluation of the california environmental quality act

The California Environmental Quality Act (CEQA) has evolved from a mini-NEPA, first enacted in 1970, into a procedural act that affects the approval process of all large developments in California. In 1990, California local governments produced over 1600 environmental impact reports and 30,000 initial studies under CEQA. Because of its widespread use, CEQA has periodically drawn the attention of the state legislature, most recently in 1993, when over 60 CEQA reform bills were introduced. This paper describes the CEQA process and evaluates its success at meeting its explicit and implicit goals. The research includes a statewide survey of CEQA practice, sent to the planning departments of all 513 local governments in California in 1991. Survey respondents agreed that CEQA helps in evaluating environmental impacts, reducing impacts, informing the public, and coordinating public agency review. It is effective in reducing the environmental impacts of individual projects, but is not as effective in improving environmental quality on an areawide scale. This research concludes that CEQA has led to positive outcomes and is not as deeply flawed as many of its critics claim. Still, CEQA as currently designed may not be the optimal vehicle for ensuring environmental quality.     

Financing Landslide Hazard Mitigation in the United States

Landslides continue to be an expensive problem in the U nited States. This paper explores the difficult problem of how to pay for reducing existing landslide risks. The paper examines a hierarchy of methods to cover repair and long term maintenance of unstable areas: assessment districts; homeowner associations; and insurance. It looks at several examples, and finds that costs in all but the worst cases average about $5000 to $15 000 per property. Landslide insurance is shown to be feasible and could be designed so as to encourage mitigation. The paper concludes that an optimal approach for mitigation and compensation would combine insurance with assessment districts.     

A mathematical model of field population dynamics of the southern pine beetle, dendroctonus frontalis

The southern pine beetle, Dendroctonus frontalis Zimmermann, is a major insect pest of pines in the southern U.S.A. A population dynamic model of D. frontalis within an infestation was developed. The model is based on the integration of several component submodels that describe individual life stage processes of the beetle. The inclusion of variable forest stand density and microclimate conditions results in a model response which closely follows actual field responses. A sensitivity analysis was performed to investigate effects of weather conditions and the importance of the spatial patterns within the forest.