Performance and Diagnostic Evaluation of Ozone Predictions by the Eta-Community Multiscale Air Quality Forecast System during the 2002 New England Air Quality Study

Abstract

A real-time air quality forecasting system (Eta-Community Multiscale Air Quality [CMAQ] model suite) has been developed by linking the National Centers for Environmental Estimation Eta model to the U.S. Environmental Protection Agency (EPA) CMAQ model. This work presents results from the application of the Eta-CMAQ modeling system for forecasting ozone (O₃) over the Northeastern United States during the 2002 New England Air Quality Study (NEAQS). Spatial and temporal performance of the Eta-CMAQ model for O₃ was evaluated by comparison with observations from the EPA Air Quality System (AQS) network. This study also examines the ability of the model to simulate the processes governing the distributions of tropospheric O₃ on the basis of the intensive datasets obtained at the four Atmospheric Investigation, Regional Modeling, Analysis, and Estimation (AIRMAP) and Harvard Forest (HF) surface sites. The episode analysis reveals that the model captured the buildup of O₃ concentrations over the northeastern domain from August 11 and reproduced the spatial distributions of observed O₃ very well for the daytime (8:00 p.m.) of both August 8 and 12 with most of normalized mean bias (NMB) within [H11006]20%. The model reproduced 53.3% of the observed hourly O₃ within a factor of 1.5 with NMB of 29.7% and normalized mean error of 46.9% at the 342 AQS sites.The comparison of modeled and observed lidar O₃ vertical profiles shows that whereas the model reproduced the observed vertical structure, it tended to overestimate at higher altitude. The model reproduced 64 –77% of observed NO₂ photolysis rate values within a factor of 1.5 at the AIRMAP sites. At the HF site, comparison of modeled and observed O₃/nitrogen oxide (NO_x) ratios suggests that the site is mainly under strongly NO_x-sensitive conditions (>53%). It was found that the modeled lower limits of the O₃ production efficiency values (inferred from O₃-CO correlation) are close to the observations.     

Use of selected chemical markers in combination with a multiple regression model to assess the contribution of domesticated animal sources of fecal pollution in the environment

Human and animal wastes are major sources of environmental pollution. Reliable methods of identifying waste sources are necessary to specify the types and locations of measures that best prevent and mitigate pollution. This investigation demonstrates the use of chemical markers (fecal sterols and bile acids) to identify selected sources of fecal pollution in the environment. Fecal sterols and bile acids were determined for pig, horse, cow, and chicken feces (10-26 feces samples for each animal). Concentrations of major fecal sterols (coprostanol, epicoprostanol, cholesterol, cholestanol, stigmastanol, and stigmasterol) and bile acids (lithocholic acid, deoxycholic acid, cholic acid, chenodeoxycholic acid, ursodeoxycholic acid, and hyodeoxycholic acid) were determined using a gas chromatography and mass spectrometer (GC-MS) technique. The fecal sterol and bile acid concentration data were used to estimate parameters of a multiple linear regression model for fecal source identification. The regression model was calibrated using 75% of the available data validated against the remaining 25% of the data points in a jackknife process that was repeated 15 times. The regression results were very favorable in the validation data set, with an overall coefficient of determination between predicted and actual fecal source of 0.971. To check the potential of the proposed model, it was applied on a set of simulated runoff data in predicting the specific animal sources. Almost 100% accuracy was obtained between the actual and predicted fecal sources. While additional work using polluted water (as opposed to fresh fecal samples) as well as multiple pollution sources are needed, results of this study clearly indicate the potential of this model to be useful in identifying the individual sources of fecal pollution.     

Removal of estrogenic activity of natural and synthetic hormones from a municipal wastewater: efficiency of horseradish peroxidase and laccase from Trametes versicolor

Some researches studied the removal of steroid estrogens by enzymatic treatment, however none verified the residual estrogenicity after the enzymatic treatment at environmental conditions. In this study, the residual estrogenic activities of the key natural and synthetic steroid estrogens were investigated following enzymatic treatment with horseradish peroxidase (HRP) and laccase from Trametes versicolor. Synthetic water and municipal wastewater containing environmental concentrations of estrone, 17beta-estradiol, estriol, and 17alpha-ethinylestradiol were treated. Liquid chromatography-mass spectrometry analysis demonstrated that the studied steroid estrogens were completely oxidized in the wastewater reaction mixture after a 1-h treatment with either HRP (8-10 U ml(-1)) or laccase (20 U ml(-1)). Using the recombinant yeast assay, it was also confirmed that both enzymatic treatments were very efficient in removing the estrogenic activity of the studied steroid estrogens. The laccase-catalyzed process seemed to present great advantages over the HRP-catalyzed system for up-scale applications for the treatment of municipal wastewater.     

Critical review of EPS production, synthesis and composition for sludge flocculation

Extracellular polymeric substances(EPS) produced by microorganisms represent biological macromolecules with unfathomable potentials and they are required to be explored further for their potential application as a bioflocculant in various wastewater sludge treatment. Although several studies already exist on biosynthetic pathways of different classical biopolymers like alginate and xanthan, no dedicated studies are available for EPS in sludge. This review highlights the EPS composition, functionality, and biodegradability for its potential use as a carbon source for production of other metabolites. Furthermore, the effect of various extraction methods(physical and chemical) on compositional, structural, physical and functional properties of microbial EPS has been addressed. The vital knowledge of the effect of extraction method on various important attributes of EPS can help to choose the suitable extraction method depending upon the intended use of EPS. The possible use of different molecular biological techniques for enhanced production of desired EPS was summarized.     

Agriculture,dairy and fishery farming practices and greenhouse gas emission footprint: a strategic appraisal for mitigation

Rising global population would force farmers to amplify food production substantially in upcoming 3–4 decades. The easiest way to increase grain production is through expanding cropping area by clearing uncultivated land. This is attained by permitting deadly loss of carbon (C) stocks, jeopardizing ecosystem biodiversity and deteriorating environmental quality. We aim to propose key agronomical tactics, livestock management strategy and advance approaches for aquaculture to increase productivity and simultaneously reduce the environmental impacts of farming sector. For this, we considered three major sectors of farming, i.e. agriculture, fishery and dairy. We collected literatures stating approaches or technologies that could reduce GHG emission from these sectors. Thereafter, we synthesized strategies or options that are more feasible and accessible for inclusion in farm sector to reduce GHG emission. Having comprehensively reviewed several publications, we propose potential strategies to reduce GHG emission. Agronomic practices like crop diversification, reducing summer fallow, soil organic carbon sequestration, tillage and crop residue management and inclusion of N2-fixing pulses in crop rotations are some of those. Livestock management through changing animals’ diets, optimal use of the gas produced from manures, frequent and complete manure removal from animal housing and aquaculture management strategies to improve fish health and improve feed conversion efficiency could reduce their GHG emission footprint too. Adapting of effective and economic practices GHG emission footprint reduction potential of farming sector could make farming sector a C neutral enterprise. To overcome the ecological, technological and institutional barriers, policy on trade, tax, grazing practice and GHG pricing should be implemented properly.     

Abrasive jet machining by means of velocity shear instability in plasma

The material removal within different machining process can be performed in distinct modalities. One of the modality is based on the erosion phenomena. In this paper, theoretical model of abrasive jet machining based on erosion phenomenon is discussed. The material is removed from the surface due to erosion. In abrasive jet machining process, the output parameter is achieved by controlling various input parameters. This paper discusses the effects of various input parameters in abrasive jet machining (AJM) on the material removal rate (as the output parameter). The results presented in the paper are obtained from a theoretical study carried out with the help of mathematical model and computational technique. Theoretical investigation indicates that magnetic field, electric field and inhomogeneity in DC electric field have significant effect on metal removal by abrasive jet machining process.     

Induction of cytochrome p‐450 and phosphatidylcholine synthesis by endosulfan in liver of rats : Effect of quality of dietary proteins

Abstract

Administration of endosulfan significantly increased microsomal protein, cytochrome P‐450 content and the activity of aminopyrine N‐demethylase. Effect of endosulfan and actinomycin D either alone or together on microsomal protein, cytochrome P‐450, NADPH cytochrome c reductase, aniline hydroxylase, aminopyrine N‐demethylase, phosphatidylcholine content, incorporation of ³H‐choline and ¹⁴C‐methionine were studied in rats given amino acid deficient and supplemented diets. Administration of endosulfan significantly increased the above parameters in both the dietary groups, whereas administration of actinomycin D did not have any effect in rats fed supplemented diets, however, significant decrease in the PC and the incorporation of choline and methionine into PC of rats fed deficient diet were observed. A positive correlation in the effect of endosulfan on hepatic mixed function oxidase activity and hepatic phosphatidylcholine is observed.     

A study of the ozone formation by ensemble back trajectory-process analysis using the Eta–CMAQ forecast model over the northeastern U.S. during the 2004 ICARTT period

The integrated process rates (IPRs) estimated by the Eta–CMAQ model at grid cells along the trajectory of the air mass transport path were analyzed to quantitatively investigate the relative importance of physical and chemical processes for O₃ formation and evolution over the northeastern U.S. during the 2004 International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) period. The Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model is used to determine the back trajectory of air masses reaching the northeast by linking a downwind receptor to upwind source areas. The process analysis is applied to a high O₃ episode occurring on July 22, 2004 at three selected sites in the northeastern U.S. The process analysis at the location of the site shows that during the daytime, the O₃ concentrations in the surface layer are mainly enhanced by the vertical diffusion of O₃-rich air from aloft, followed by horizontal advection (HADV) and chemical production (CHEM), whereas dry deposition (DDEP) and vertical advection (ZADV) mainly deplete O₃ concentrations at the sites of Valley Central (VC), NY and Castle Spring (CS), NH. By integrating the effects of each process over the depth of the daytime planetary boundary layer (PBL), it was found that at the VC site, CHEM and HADV contributed about 53% and 41%, respectively, to O₃ levels within the PBL. This confirms the significance of regional transport of O₃ from the industrialized areas into the Northeast. On the other hand, the process analysis results for O₃ formation in moving air masses indicate that on July 22, large chemical production of O₃ along the transport path over the polluted urban regions leads to significant increase in O₃ in the air mass reaching the VC site, whereas the low chemical production of O₃ along the transport path over the low emission regions leads to the low O₃ concentration at the site of Belleayre Mountain (BM), NY. The dramatic buildup of O₃ concentration from 50 ppb to 102 ppb in the air masses before reaching the VC site after 12:00 EST on 7/22 indicates the significant impact of pollution from the northeastern urban corridor at this site. On the basis of the results at the CS site, it was found that high NO_x emissions along the transport path led to large chemical production of O₃ in the air mass reaching the CS site on July 22. In contrast, the low chemical production of O₃ associated with low emission (relatively clean conditions) along the transport path over the northern portions of the domain is responsible for the low O₃ concentration at the CS site on July 26.     

Work-Related Musculoskeletal Disorders,Job Stressors and Gender Responses in Foundry Industry

The main aim of this paper was to identify job stressors, gender responses and association of psychosocial work stressors with prevalence of work related musculoskeletal disorders (MSDs) among foundry workers. The data were obtained with ergonomics checklist using Likert scale. The results of this study showed a high prevalence of MSDs among workers. The male workers were more prone to pain in neck while the female workers were more prone to MSDs in upper back and shoulders. Correlation analysis showed significant relationship of dimensions of work aspects with pain and discomfort. It proved that the work-related MSDs are the results of interaction of multiple stressors associated with work and work environment, and other personal factors. ANOVA indicated that the perception of work aspects as stressors differed significantly between male and female workers.     

Comparative studies on accumulation of Cr from metal solution and tannery effluent under repeated metal exposure by aquatic plants: its toxic effects

The present study demonstrates comparison of Cr accumulatingpotential by the plants of Najas indica Cham. (submerged),Vallisneria spiralis L. (rooted submerged) and Alternanthera sessilis R. Br. (rooted emergent) under repeatedmetal exposure and its effect on chlorophyll and protein concentrations. These plants were treated with different concentrations of Cr under repeated exposure in controlled laboratory conditions to assess the maximum metal accumulationpotential. The plants of V. spiralis accumulated significantly high amount of Cr under laboratory conditions incomparison to N. indica and A. sessilis. The maximumaccumulation of 1378, 458 and 201 g g^-1 dw Cr was found in the leaves of V. spiralis, N. indica and A. sessilis, respectively at 8 mg L^-1 after 9 day of Cr exposure. These plants have shown a decrease in chlorophyll andprotein concentrations with increase in Cr concentrations. In view of high accumulation of Cr in V. spiralis, the plantswere treated with different concentrations of tannery effluent collected from Common Effluent Treatment Plant, Unnao (UP). Theplants of V. spiralis treated with 100% tannery wastewatershowed the maximum accumulation (57.5 g g^-1 dw) of Cr in the roots after 10 days of exposure. The plants were foundeffective in removing Cr from solution and tannery effluent.