NHDPlusHR: A National Geospatial Framework for Surface‐Water Information

The U.S. Geological Survey is developing a new geospatial hydrographic framework for the United States, called the National Hydrography Dataset Plus High Resolution (NHDPlusHR), that integrates a diversity of the best‐available information, robustly supports ongoing dataset improvements, enables hydrographic generalization to derive alternate representations of the network while maintaining feature identity, and supports modern scientific computing and Internet accessibility needs. This framework is based on the High Resolution National Hydrography Dataset, the Watershed Boundaries Dataset, and elevation from the 3‐D Elevation Program, and will provide an authoritative, high precision, and attribute‐rich geospatial framework for surface‐water information for the United States. Using this common geospatial framework will provide a consistent basis for indexing water information in the United States, eliminate redundancy, and harmonize access to, and exchange of water information.     

Analytical solution for estimating storage efficiency of geologic sequestration of CO2

During injection of carbon dioxide (CO₂) into deep saline aquifers, the available pore volume of the aquifer may be used inefficiently, thereby decreasing the effective capacity of the repository for CO₂ storage. Storage efficiency is the fraction of the available pore space that is utilized for CO₂ storage, or, in other words, it is the ratio between the volume of stored CO₂ and the maximum available pore volume. In this note, we derive and present simple analytical expressions for estimating CO₂ storage efficiency under the scenario of a constant-rate injection of CO₂ into a confined, homogeneous, isotropic, saline aquifer. The expressions for storage efficiency are derived from models developed previously by other researchers describing the shape of the CO₂-brine interface. The storage efficiency of CO₂ is found to depend on three dimensionless groups, namely: (1) the residual saturation of brine after displacement by CO₂; (2) the ratio of CO₂ mobility to brine mobility; (3) a dimensionless group (which we call a “gravity factor”) that quantifies the importance of CO₂ buoyancy relative to CO₂ injection rate. In the particular case of negligible residual brine saturation and negligible buoyancy effects, the storage efficiency is approximately equal to the ratio of the CO₂ viscosity to the brine viscosity. Storage efficiency decreases as the gravity factor increases, because the buoyancy of the CO₂ causes it to occupy a thin layer at the top of the confined formation, while leaving the lower part of the aquifer under-utilized. Estimates of storage efficiency from our simple analytical expressions are in reasonable agreement with values calculated from simulations performed with more complicated multi-phase-flow simulation software. Therefore, we suggest that the analytical expressions presented herein could be used as a simple and rapid tool to screen the technical or economic feasibility of a proposed CO₂ injection scenario.     

Assessing multiple novel tracers to improve the understanding of the contribution of agricultural farm waste to diffuse water pollution

A study was undertaken on drained and undrained 1 ha grassland lysimeters to assess the effectiveness of multiple novel tracing techniques in understanding how agricultural slurry waste moves from land to water. Artificial fluorescent particles designed to mimic the size and density of organic slurry particles were found to move off the grassland via inter-flow (surface + lateral through-flow) and drain-flow. Where both pathways were present the drains carried the greater number of particles. The results of the natural fluorescence and δ13C of water samples were inconclusive. Natural fluorescence was higher from slurry-amended lysimeters than from zero-slurry lysimeters, however, a fluorescence decay experiment suggested that no slurry signal should be present given the time between slurry application and the onset of drainage. The δ13C values of >0.7 microm and <0.7 microm material in drainage were varied and unrelated to discharge. The mean value of >0.7 microm δ13C in water from the drain-flow pathways was higher from the lysimeter which had received naturally enriched maize slurry compared to the lysimeter which received grass slurry indicating a contribution of slurry-derived material. Values of <0.7 microm δ13C from the same pathway, however, produced counter intuitive trends and may indicate that different fractions of the slurry have different δ13C values.     

Atmospheric transport of persistent organic pollutants (POPs) to Bjørnøya (Bear island)

A first medium term monitoring of atmospheric transport and distribution for persistent organic pollutants (POPs) in Bj?rn?ya (Bear island) air samples has been performed in the period between week 51/1999 and week 28/2003. A total of 50 single compounds consisting of polychlorinated biphenyls (33 congeners), hexachlorobenzene (HCB), hexachlorocyclohexane isomers (alpha-, beta-, gamma-HCH), alpha-endosulfan, cyclodiene pesticides (chlordanes, nonachlor-isomers, oxy-chlordane, heptachlor and chlordane) as well as dichlorodiphenyltrichloroethane (DDT) derivatives were analysed and quantified. Atmospheric transport of POPs was identified as an important contamination source for the island. PCBs, HCB and HCH isomers were the predominant POP groups, contributing with 70-90% to the overall POP burden quantified in the Bj?rn?ya air samples. The highest concentration levels for a single compound were found for HCB (25-35 pg m(-3)). However, the sum of 33 PCB congeners was found to be in the same concentration range (annual means between 15 and 30 pg m(-3)). Cyclodiene pesticides, DDT derivatives and alpha-endosulfan were identified as minor contaminants. Several atmospheric long-range transport episodes were identified and characterised. Indications for industrial emissions as well as agricultural sources were found for the respective atmospheric transport episodes. A first simple statistical correlation assessment showed that for long-range transport of pollution, the local meteorological situation is not as important as the air mass properties integrated over the time period of the transport event. The local weather situation, on the other hand, is important when investigating deposition rates and up-take/accumulation properties in the local ecosystem. Based upon chemical data interpretation, valuable information about the influence of primary and secondary sources on the air mass contamination with chlorinated insecticides (e.g., HCHs) was found and discussed. The interdisciplinary interpretation of contaminant data using statistical methods, chemical analysis, meteorological modelling and classical meteorological information for a comprehensive evaluation of atmospheric long range transport into the European Arctic (Bj?rn?ya) has proven to be a highly versatile tool not only for atmospheric scientists but also with strong potential for regulatory purposes.     

Critical Loads of Acidity for Forest Soils and Relationship to Forest Decline in the Northern Czech Republic

Critical load calculations in the Czech part of 'the Black Triangle' show exceedance of critical load in 75% of the forest area. A comparison with forest damage data shows an insignificant tendency toward more forest damage in areas with high exceedance. We conclude that high exceedance of critical load is a probable contributing factor to forest damage in the area.     

DATA ANALYSIS OF WATER QUALITY TIME SERIES IN LAKE ERIE1

ABSTRACT: A comprehensive data analysis study is carried out for detecting trends and other statistical characteristics in water quality time series measured in Long Point Bay, Lake Erie. In order to glean an optimal amount of useful information from the available data, the exploratory and confirmatory data anslysis stages are adhered to. To test a range of hypotheses regarding the statistical properties of the time series, a wide variety of both parametric and nonparametric techniques are employed. A particularly useful nonparametric method for discovering trends is the seasonal Mann-Kendall test.     

Multicenter clinical experience with non-invasive cell-free DNA screening for monosomy X and related X-chromosome variants

Objective

We aimed to investigate how the presence of fetal anomalies and different X chromosome variants influences Cell-free DNA (cfDNA) screening results for monosomy X.

Methods

From a multicenter retrospective survey on 673 pregnancies with prenatally suspected or confirmed Turner syndrome, we analyzed the subgroup for which prenatal cfDNA screening and karyotype results were available. A cfDNA screening result was defined as true positive (TP) when confirmatory testing showed 45,X or an X-chromosome variant.

Results

We had cfDNA results, karyotype, and phenotype data for 55 pregnancies. cfDNA results were high risk for monosomy X in 48/55, of which 23 were TP and 25 were false positive (FP). 32/48 high-risk cfDNA cases did not show fetal anomalies. Of these, 7 were TP. All were X-chromosome variants. All 16 fetuses with high-risk cfDNA result and ultrasound anomalies were TP. Of fetuses with abnormalities, those with 45,X more often had fetal hydrops/cystic hygroma, whereas those with “variant” karyotypes had different anomalies.

Conclusion

Both, 45,X or X-chromosome variants can be detected after a high-risk cfDNA result for monosomy X. When there are fetal anomalies, the result is more likely a TP. In the absence of fetal anomalies, it is most often an FP or X-chromosome variant.     

Dynamisiertes Emissionskataster für den Freistaat Sachsen

A computer aided tool was created for the calculation of emission values in Saxony. It is based on the Geographic Information System ArcInfo and enables the emission values for past, present and future periods to be assessed. At present, the anthropogenic air pollutants SO₂, NO_x, CO, NH₃, NMVOC, TSP, CO₂, CH₄ and N₂O can be calculated by means of emission factors and statistical values. The tool is open to future expansions. The moduls represent the following emission groups: Power stations, large agricultural farms and large industrial plants as point sources, as well as transport, households, small consumer and the total emission of agriculture as area sources. The local resolution of emission values, the relationship of emission values to geographic or political territories, the inclusion of a high resolved digital street network, and the use of actual data concerning land use, density of population and density of build up areas are realized by GIS ArcInfo. The dynamic emission inventory can be used, alone or in conjunction with an atmospheric dispersion model, to assess trends in air quality.