Characterization and prediction of highway runoff constituent event mean concentration

Highway stormwater runoff quality data were collected from throughout California during 2000-2003. Samples were analyzed for conventional pollutants (pH, conductivity, hardness, and temperature); aggregates (TSS, TDS, TOC, DOC); total and dissolved metals (As, Cd, Cr, Cu, Ni, Pb, and Zn); and nutrients (NO(3)-N, TKN, total P, and ortho-P). Storm event and site characteristics for each sampling site were recorded. A statistical summary for chemical characteristics of highway runoff is provided based on statewide urban and non-urban highways. Constituent event mean concentrations (EMCs) were generally higher in urban highways than in non-urban highways. The chemical characteristics of highway runoff in California were compared with national highway runoff chemical characterization data. The results obtained in California were generally similar to those found in other states. The median EMC for Pb measured in studies conducted in previous decades was much higher than the current median Pb EMC in California. The lower Pb EMC in California compared to previous highway runoff monitoring is believed to be due to the elimination of leaded gasoline. An attempt was also made to identify surrogate constituents within a general family of water quality categories using Spearman correlations and selected pairs with Spearman coefficients greater than 0.8. The strongest correlations were observed among parameters associated with dissolved minerals (EC, TDS, and chloride); organic carbon (TOC and DOC); petroleum hydrocarbons (TPH and O & G); and particulate matter (TSS and turbidity). Within the metals category, total iron concentration was highly correlated with most total metal concentrations. The correlations between total and dissolved concentrations were all less than 0.8, even between total and dissolved concentrations of the same metals. Multiple linear regression (MLR) analyses were performed to evaluate the impact of various site and storm event variables on highway runoff constituent EMCs. Parameters found to have significant impacts on highway runoff constituent EMCs include: total event rainfall (TER); cumulative seasonal rainfall (CSR); antecedent dry period (ADP); contributing drainage area (DA); and annual average daily traffic (AADT). Surrounding land use and geographic regions were also determined to have a significant impact on runoff quality. The MLR model was also used to predict constituent EMCs. Model performance determined by comparing predicted and measured values showed good agreement for most constituents.     

Predicted taxonomic patterns in pheromone production by longhorned beetles

Males of five species of three tribes in the longhorned beetle subfamily Cerambycinae produce volatile pheromones that share a structural motif (hydroxyl or carbonyl groups at carbons two and three in straight-chains of six, eight, or ten carbons). Pheromone gland pores are present on the prothoraces of males, but are absent in females, suggesting that male-specific gland pores could provide a convenient morphological indication that a species uses volatile pheromones. In this article, we assess the taxonomic distribution of gland pores within the Cerambycinae by examining males and females of 65 species in 24 tribes using scanning electron microscopy. Gland pores were present in males and absent in females of 49 species, but absent in both sexes of the remaining 16 species. Pores were confined to indentations in the cuticle. Among the species that had male-specific gland pores were four species already known to produce volatile compounds consistent with the structural motif. These findings support the initial assumption that gland pores are associated with the production of pheromones by males. There were apparently no taxonomic patterns in the presence of gland pores. These findings suggest that volatile pheromones play an important role in reproduction for many species of the Cerambycinae, and that the trait is evolutionarily labile.     

Risk homeostasis theory, utility and accident loss in a simulated driving task

The suggestion that utility is logically necessary for behavioural adjustments to be made in response to changes in intrinsic risk is fundamental to risk homeostasis theory (RHT). However, the methodology used to investigate RHT — analysis of road traffic accidents — is ill-suited to the investigation of this assertion. The role of utility and intrinsic risk as possible determinants of behavioural compensation were therefore examined experimentally across 14 specific behaviours using the Aston Driving Simulator. RHT predicts that these two factors act in a multiplicative way to form a statistical interaction. It also predicts that the behavioural pathways through which the effect manifests itself should be reconcilable with the concept of utility. Both predictions received little support in this experiment, suggesting that utility and intrinsic risk operate as independent factors: both factors produced significant main effects across a number of behaviours. This finding, if it can be generalised, implies that, contrary to mathematically-based models of danger compensation and the traditional model of risk homeostasis, utility is not logically necessary for behavioural compensation in response to a change in intrinsic risk.     

Testing of a GIS model ofEucalyptus Iargiflorens health on a semiarid,saline floodplain

Irrigated agriculture has resulted in substantial changes in water flows to the lower reaches of the River Murray. These changes have led to large-scale occurrences of dieback inEucalyptus largiflorens (black box) woodlands as well as increased inputs of salt to the river. Management options to address problems of this scale call for the use of spatial data sets via geographic information systems (GIS). A GIS exists for one floodplain of the River Murray at Chowilla, and a simple model predicted six health classes ofEucalyptus largiflorens based on groundwater salinity, flooding frequency, and groundwater depth.To determine the usefulness of the model for vegetation management, the quality of both the model and the GIS data sets were tested. Success of the testing procedure was judged by the degree of spatial matching between the model's predictions of health and that assessed from aerial photographs and by field truthing. Analyses at 80 sites showed that tree health was significantly greater where groundwater salinity was less than 40 dS/m or flooding occurred more frequently than 1 in 10 years or depth to groundwater exceeded 4 m. Testing of the GIS data sets found that vegetation was misclassified at 15% of sites. Association was shown between GIS-predicted values and field-truthed values of groundwater salinity but not groundwater depth. The GIS model of health is a useful starting point for future vegetation management and can be further improved by increasing the quality of the data coverages and further refining of the model to optimize parameters and thresholds.     

CONTINUOUS SIMULATION FOR WATER QUALITY PLANNING1

ABSTRACT: This paper describes a methodology for the evaluation of water quality plans analogous to procedures used in flood control planning, where flood damage frequency curves provide the basis for determining flood control benefits. The proposed method uses continuous water quality simulation to develop long term information from which water quality frequency curves can be obtained. This frequency information allows the evaluation of the impact of proposed water quality control plans taking into consideration the variable nature of the water resource. Using treatment costs and other economic indicators of water quality, the frequency information can be used to estimate the cost-effectiveness and economic efficiency of alternative plans. The method is demonstrated in a semi-hypothetical environment; real hydrologic and climatic characteristics are assigned to a hypothetical watershed configuration. Alternative management plans are simulated and analyzed for both physical and economic impacts. The advantages of continuous simulation and its use in water quality planning are explored.     

Modeling of gas-phase photodegradation of chloroform and carbon tetrachloride

The relationship between the irradiance in a photoreactor and the rate of photodegradation of organics is essential in the scaling-up of photoreactors to treat large volumes of air contaminated with organic pollutants. In this study, the analysis is adopted to compare results obtained from two different photoreactors. Initially, the applicability of two light models in calculating the irradiance in two photoreactors was evaluated. Thereafter, kinetic models of ultraviolet (UV) photooxidation of chloroform (CHCl3) and carbon tetrachloride (CCl4) from the archived literature were tested using experimental data under various operating conditions and different irradiances. Sensitivity analyses were conducted using different values of model parameters to determine the significance of each parameter on the photodegradation of the two chlorinated organics. For compounds that undergo photolysis as a primary mode of degradation, the rate of photodegradation at low initial concentrations can be predicted easily by the following equation: d[C]/dt = -2.303Iave, lambdaepsilonlambdaphilambda[C]. Although the photodegradation of chlorinated organic compounds in dry and humid air can be predicted well, it is difficult to predict the Cl* sensitized oxidation occurring at high initial concentrations. A good agreement between the simulated and experimental data provides a sound basis for the design of large-scale reactors.     

INFLUENCING WATER LEGISLATWE DEVELOPMENT WHAT TO DO AND WHAT TO AVOID1

ABSTRACT: Whomever would affect water policy development must influence the water legislative process. This paper discusses in the context of the Model State Water Allocation Code the following ten ideas about doing that: (1) seek the right timing for enactment; (2) set modest goals; (3) prepare a well-drafted proposal; (4) recognize diversity by offering legislative choices; (5) consider the impacts of adoption; (6) make alliances; (7) respect executive influence; (8) become involved in legislative interaction; (9) be flexible; and (10) persist. Heeding these ideas, although not guaranteeing enactment, is sure to be educational for participants and useful to legislators.     

Using community relations to reduce costs during remediation projects

Almost everyone who has been involved in a site remediation project has seen schedules slip and costs escalate due to political pressure from the public or the press. While focusing on remediation technologies and containment techniques to control costs, many organizations have neglected a major cost driver—public opinion. This article examines community relations from the perspective of an organization trying to control costs during a site remediation project. It details the strong correlation between the cost of a site cleanup and the level of public dissatisfaction and provides an organization with specific strategies on how to use proven communications techniques to lower costs. Examination of several case studies is provided, including a study involving a site in which community representatives actively worked to reduce project costs. It is clear that any responsible cleanup must be protective of public health and the environment. But it is becoming increasingly apparent that wise allocation of available resources has a profound effect on the program's ability to ensure public and environmental safety. In many cases, it has been proven that some costly cleanups—for example, involving excavation—sometimes actually increase risk by creating an exposure pathway where none existed before. In turn, such cleanups waste resources that are needed elsewhere. The challenge in dealing with this complicated issue is to help stakeholders understand the true ramifications of the choices that are faced at each site. If these stakeholders feel uninformed, powerless, or excluded from the process, it is likely that they will be unable to enter a productive discussion. The community relations programs outlined in documents such as a Superfund guidance can be helpful in familiarizing the community with site-related issues and with gathering public input. These activities act as a baseline for the programs discussed in this article. However, existing programs are not focused on providing a strategic advantage in reaching cleanup solutions and balancing health and environmental considerations with economic considerations.