Concentration of bioactive compounds in mussels Mytilus galloprovincialis as an indicator of pollution

The polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organotins were analyzed in mussels Mytilus galloprovincialis from polluted and unpolluted sites from Mokpo Bay, Korea. The total PAH's concentrations (10(-3)mgkg(-1)) measured by GC-MS were in the range from 31+/-23 to 1+/-1. Among the eight PAHs the predominant ones were fluoranthene, phenanthrene and pyrene and accounted approximately 63% of the total PAHs. Among the four detected PCBs the highest content was of PCB 153, which accounted about 47% of the total PCBs. The main organotin compounds were dibutyltindichloride (DBT) and tributyltinchloride (TBT) and their composition was approximately 33% and 24%. PAHs, PCBs and organotins were found only in the mussels from polluted site. The antioxidant activity by ABTS [2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] test was higher in mussels from polluted than from unpolluted sites (P<0.05). It was found a correlation between the determined compounds (PAHs, PCBs and organotins) and the antioxidant activity of the mussel tissue from polluted site and the correlation coefficients were 0.96, 0.92 and 0.80, respectively. Such correlation can be explained by the properties of mussels. Since the mussel cell wall and tissues are hydrophobic, they can concentrate a number of hydrophobic pollutants like PAHs and PCBs from the marine environment by solubility rules. On the other hand, proteins are lipophilic compounds having antioxidant properties. Certain amino acid residues and thiol (-SH) groups, contained in proteins, respond to the ABTS antioxidant activity assay. Thus there may be a correlation between the total antioxidant activity of the organism and the PAH-PCB pollutants which were concentrated from its environment. The studied properties of mussels from polluted site can be used as an additional indicator of pollution.     

Comparison of analytical techniques for the determination of aldehydes in test chambers

The level of carbonyl compounds in indoor air is crucial due to possible health effects and the high prevalence of their potential sources. Therefore, selecting a convenient and rapid analytical technique for the reliable detection of carbonyl compound concentrations is important. The acetyl acetone (acac) method is a widely used standard procedure for detecting gaseous formaldehyde. For measuring formaldehyde along with other carbonyl compounds, the DNPH-method is commonly applied. The recommended procedure for measuring volatile organic compounds (VOCs) is sampling on Tenax TA, followed by thermal desorption and GC/MS analysis. In this study, different analytical techniques for the quantification of formaldehyde, pentanal, and hexanal are critically compared. It was found that the acac- and DNPH-method are in very good agreement for formaldehyde. In contrast, the DNPH-method significantly underestimates indoor air concentrations of the higher aldehydes in comparison to sampling on Tenax TA, although both methods are strongly correlated. The reported results are part of the EURIMA-WKI study on levels of indoor air pollutants resulting from construction, building materials and interior decoration.     

Absorption of nitro-polycyclic aromatic hydrocarbons by biomembrane models: effect of the medium lipophilicity

To demonstrate the relationship between the structure of nitro-polycyclic aromatic hydrocarbons and their effect on biomembranes, we have investigated the influence of three structurally different nitro-polycyclic aromatic hydrocarbons, 2-nitrofluorene, 2,7-dinitrofluorene and 3-nitrofluoranthene, on the thermotropic behavior of dimyristoylphosphatidylcholine multilamellar vesicles, used as biomembrane models, by means of differential scanning calorimetry. The obtained results indicate that the studied nitro-polycyclic aromatic hydrocarbons affected the thermotropic behavior of multilamellar vesicles to various extents, modifying the pretransition and the main phase transition peaks and shifting them to lower temperatures. The effect of the aqueous and lipophilic medium on the absorption process of these compounds by the biomembrane models has been also investigated revealing that the process is hindered by the aqueous medium but strongly allowed by the lipophilic medium.     

Determination of the origin of groundwater nitrate at an air weapons range using the dual isotope approach

Nitrate is one of the most common contaminants in shallow groundwater, and many sources may contribute to the nitrate load within an aquifer. Groundwater nitrate plumes have been detected at several ammunition production sites. However, the presence of multiple potential sources and the lack of existing isotopic data concerning explosive degradation-induced nitrate constitute a limitation when it comes to linking both types of contaminants. On military training ranges, high nitrate concentrations in groundwater were reported for the first time as part of the hydrogeological characterization of the Cold Lake Air Weapons Range (CLAWR), Alberta, Canada. Explosives degradation is thought to be the main source of nitrate contamination at CLAWR, as no other major source is present. Isotopic analyses of N and O in nitrate were performed on groundwater samples from the unconfined and confined aquifers; the dual isotopic analysis approach was used in order to increase the chances of identifying the source of nitrate. The isotopic ratios for the groundwater samples with low nitrate concentration suggested a natural origin with a strong contribution of anthropogenic atmospheric NOx. For the samples with nitrate concentration above the expected background level the isotopic ratios did not correspond to any source documented in the literature. Dissolved RDX samples were degraded in the laboratory and results showed that all reproduced degradation processes released nitrate with a strong fractionation. Laboratory isotopic values for RDX-derived NO(3)(-) produced a trend of high delta(18)O-low delta(15)N to low delta(18)O-high delta(15)N, and groundwater samples with nitrate concentrations above the expected background level appeared along this trend. Our results thus point toward a characteristic field of isotopic ratios for nitrate being derived from the degradation of RDX.     

A new tracer technique for monitoring groundwater fluxes: the Finite Volume Point Dilution Method

Quantification of pollutant mass fluxes is essential for assessing the impact of contaminated sites on their surrounding environment, particularly on adjacent surface water bodies. In this context, it is essential to quantify but also to be able to monitor the variations with time of Darcy fluxes in relation with changes in hydrogeological conditions and groundwater - surface water interactions. A new tracer technique is proposed that generalizes the single-well point dilution method to the case of finite volumes of tracer fluid and water flush. It is called the Finite Volume Point Dilution Method (FVPDM). It is based on an analytical solution derived from a mathematical model proposed recently to accurately model tracer injection into a well. Using a non-dimensional formulation of the analytical solution, a sensitivity analysis is performed on the concentration evolution in the injection well, according to tracer injection conditions and well-aquifer interactions. Based on this analysis, optimised field techniques and interpretation methods are proposed. The new tracer technique is easier to implement in the field than the classical point dilution method while it further allows monitoring temporal changes of the magnitude of estimated Darcy fluxes, which is not the case for the former technique. The new technique was applied to two experimental sites with contrasting objectives, geological and hydrogeological conditions, and field equipment facilities. In both cases, field tracer concentrations monitored in the injection wells were used to fit the calculated modelled concentrations by adjusting the apparent Darcy flux crossing the well screens. Modelling results are very satisfactory and indicate that the methodology is efficient and accurate, with a wide range of potential applications in different environments and experimental conditions, including the monitoring with time of changes in Darcy fluxes.     

28-homobrassinolide protects chickpea (Cicer arietinum) from cadmium toxicity by stimulating antioxidants

In the present experiment the seeds of Cicer arietinum (L.) cv. Uday were inoculated with specific Rhizobium grown in sandy loam soil and were allowed to grow for 15 days. At this stage, the seedlings were supplied with 0, 50, 100 or 150 microM of cadmium in the form of cadmium chloride and sprayed with 0.01 microM of 28-homobrassinolide (HBL) at 30-day stage. The data indicated that plant fresh and dry mass, number of nodules, their fresh and dry mass, leghemoglobin content, nitrogen and carbohydrate content in the nodules, leaf chlorophyll content, nitrate reductase and carbonic anhydrase activities decreased proportionately with the increasing concentrations of cadmium but the content of proline and the activities of catalase, peroxidase and superoxide dismutase increased. The ill effect, generated by cadmium, was overcome if the stressed plants were sprayed with HBL.     

油气集输站安全监控预警及管理信息系统的开发

提出油气集输站安全监控预警及管理信息系统建设的调研内容、需求分析以及安全相关控制系统的风险分析流程。设计了该系统建设的4层结构框架和拓扑图,深入研究了实时参数监控、分级报警与安全保护控制、智能诊断与预警、多媒体监控、安全生产管理信息子系统的主要开发内容和功能实现。     

扁平圆环局限空间蒸气云爆炸数值模拟及其在事故调查中的应用

传统方法不能深入描述扁平圆环局限空间蒸气云爆炸过程,笔者利用AutoReaGas软件对这一特殊形状和边界条件的蒸气云爆炸过程进行了数值模拟.其结果表明:对于单一点火源,扁平圆环局限空间蒸气云爆炸冲击波传播方向有2个,相向传播的2个冲击波最后会发生叠加效应而使冲击波超压增大;数值模拟结果和事故现场结果对照相吻合,能为事故调查确定最初起爆点位置等提供依据.     

HAN阻隔防爆模型研究

通过合理简化,利用多方气体状态方程,分别建立油品储运容器内可燃混合气体定容爆炸模型和装设阻隔防爆材料的油品储运容器内可燃混合气体爆炸模型,获得了阻隔防爆性能测试装置的燃爆容器抗爆设计限值,以及其在HAN阻隔防爆测试中燃爆容器试爆压力量级的控制下限值,同时,还给出HAN工程应用中容器留空率的计算方法,具有实际指导意义。