Toxicity to freshwater organisms from oils and oil spill chemical treatments in laboratory microcosms

Toxicity and temporal changes in toxicity of freshwater-marsh-microcosms containing South Louisiana Crude (SLC) or diesel fuel and treated with a cleaner or dispersant, were investigated using Chironomus tentans, Daphnia pulex, and Oryzias latipes. Bioassays used microcosm water (for D. pulex and O. latipes) or soil slurry (for C. tentans) taken 1,7, 31, and 186 days after treatment. SLC was less toxic than diesel, chemical additives enhanced oil toxicity, the dispersant was more toxic than the cleaner, and toxicities were greatly reduced by day 186. Toxicities were higher in the bioassay with the benthic species than in those with the two water-column species. A separate experiment showed that C. tentans' sensitivity was intermediate to that of Tubifex tubifex and Hyallela azteca. Freshwater organisms, especially benthic invertebrates, thus appear seriously effected by oil under the worst-case-scenario of our microcosms. Moreover, the cleaner and dispersant tested were poor response options under those conditions.     

Effect of silica sand on activation energy for diffusion of sodium ions in montmorillonite and silica sand mixture

The effect of silica sand on the diffusion of sodium ions in mixtures of montmorillonite and silica sand was studied by measuring the apparent diffusion coefficients, activation energies for diffusion, and the basal spacing of the mixed samples. These diffusion experiments suggest that the apparent diffusion coefficients of sodium ions in the mixed samples were almost the same as those of pure montmorillonite samples having the same partial dry densities of montmorillonite. The activation energy dependence for diffusion of sodium ions on the partial dry density was different between the mixed samples and the pure montmorillonite samples. The activation energy increased by adding silica sand at the partial dry density of 1.0 Mg m(-3), and decreased by adding silica sand at the partial dry densities higher than 1.2 Mg m(-3). A change in the XRD profile was observed after adding silica sand at the partial dry density of 1.6 Mg m(-3). Here, a three-water-layer hydrate state of montmorillonite was found in the mixed sample whereas only a two-water-layer hydrate state was observed in the pure montmorillonite sample. These experimental results suggest that silica sand changed the montmorillonite microstructure in the mixed samples, which then altered the sodium-ion diffusion process.     

Spatio-temporal behaviour and mass balance of fluorine in forest soils near an aluminium smelting plant: short- and long-term aspects

With the help of a large number of monitoring sites, the behaviour of F in forested ecosystems of a formerly polluted area (M?hlin and Rheinfelden, Switzerland) could be studied over 30 years. An aluminium smelting plant originated the pollution of this area in the past: however, after the installation of a filtration plant in 1958 the F emissions were reduced and since 1991 almost absent the primary production of aluminium was stopped. The present-day area with elevated F contents (water-soluble F with >20 mg/kg) is restricted to a radius of about 1000 m from the plant. In 1969 this area had a radius of about 3 and 5 km. Between 1969 and 2000 a significant decrease in the soluble F content in the soil was observed together with a substantial decrease of F in the vegetation. The net losses of water-soluble F in the soil were in the range of 35 up to more than 70% of the original concentration and the F losses in the vegetation between 60 up to more than 80%. After the reduction of high F deposition rates the accumulated SOM was decomposed within the observation period 1969-1993. The combined decrease in F and humus led to chain reactions with losses of major elements and a dealumination of clay minerals, i.e. removal of interlayered Al of 2:1 minerals and consequent formation of smectites.     

A simplified method for sampling and analysis of high volume surface water for organic contaminants using XAD-2

A simple compressed-gas driven system for field processing and extracting water for subsequent analyses of hydrophobic organic compounds is presented. The pumping device is a pneumatically driven pump and filtration system that can easily clarify at 4 L/min. The extraction device uses compressed gas to drive filtered water through two parallel XAD-2 resin columns, at about 200 mL/min. No batteries or inverters are required for water collection or processing. Solvent extractions were performed directly in the XAD-2 glass columns. Final extracts are cleaned-up on Florisil cartridges without fractionation and contaminants analyzed by GC-MS. Method detection limits (MDLs) and recoveries for dissolved organic contaminants, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides are reported along with results of surface water analysis for the San Francisco Bay, CA.     

The characterisation of polycyclic aromatic hydrocarbons emissions from burning of different firewood species in Australia

Four kinds of woods used for residential heating in Australia were selected and burned under two burning conditions in a domestic wood heater installed in a laboratory. The selected wood species included pine (Pinus radiata), red gum (Eucalvptus camaldulensis), sugar gum (Eucalyptus cladocalyx) and yellow box (Eucalyptus melliodora). The two different burning conditions represented fast burning and slow burning, with the air inlet of the combustion chamber respectively 'full open' and 'half open'. By sampling and analysing particulate and gaseous emissions from the burning of each load of wood under defined experimental conditions, PAHs emissions and their profiles in the particulate and gaseous phases were obtained. 16 species out of the 18 selected PAHs were detected. Of these, seven species were detected in the gaseous phase and most were lower molecular weight compounds.Similarly, more than 10 species of PAHs were detected in the particulate phase and these were mostly heavier molecular weight compounds. Under both burning conditions, emission levels for total PAHs and total genotoxic PAHs were the highest for pine and lowest for sugar gum, with red gum being the second highest, followed by yellow box. Using the specific sampling method, gaseous PAHs accounted for above 90% mass fraction of total PAHs in comparison to particulate PAHs (10%). The majority of the genotoxic PAHs were present in the particulate phase. PAHs emission levels in slow burning conditions were generally higher than those in fast burning conditions.     

Validation of pyrithiobac sodium (Staple herbicide) ELISA for Australian cotton soils

An enzyme-linked immunosorbent assay (ELISA) for pyrithiobac-sodium (Staple) produced by DuPont was validated in Australian soils. This pyrithiobac-sodium ELISA was shown to be highly sensitive with the limit of detection of 4-5 ppt. Soil samples were extracted either in PBS buffer by shaking or by accelerated solvent extraction (ASE). While pyrithiobac sodium can be analyzed directly by ELISA after ASE extraction with 1/10 or more dilutions, the analysis of PBS extract required filtration and dilution 1/20 or more depending on the concentration. Immunoassay results compared favorably with GC-MS results for both ASE and PBS extract of incurred residue of pyrithiobac sodium in soil samples, indicating that this ELISA can be an inexpensive and reliable alternative to conventional residue analysis methods for quantification of pyrithiobac-sodium. This validation provided the basis for applying the ELISA to a field study of pyrithiobac-sodium.     

Specific accumulation of polychlorinated biphenyls and organochlorine pesticides in Japanese common squid as a bioindicator

Organochlorines (OCs) representing Persistent Organic Pollutants (POPs) such as PCBs (polychlorinated biphenyls), DDTs (DDT and its metabolites), CHLs (chlordane compounds), HCHs (hexachlorocyclohexane isomers) and HCB (hexachlorobenzene) were determined in the liver of Japanese common squid (Todarodes pacificus) collected from the waters around Japan (Japan Sea and western North Pacific Ocean). Among OCs concentrations, PCBs (upto 5600 ng/g lipid wt.) were the highest, and those of other OCs were in the order of DDT> CHLs > HCHs > HCB. Studies on growth trend and seasonal variation of OCs in this species suggest a rapid reflection of the pollution levels in seawater where and when they were collected, regardless of body-length and time of collection. These results indicate that Japanese common squid is a suitable bioindicator for monitoring OCs pollution in waters around Japan. With regard to the geographical distribution of OCs in this species collected from waters around Japan, OCs concentrations in specimens from Japan Sea were higher than those from the Pacific Ocean. This result might reflect some existing of local pollution sources of OCs around Japan Sea, and slower water exchange between Japan Sea and open ocean.     

US Army Chemical Corps Vietnam veterans health study: preliminary results

The long-term health consequences of exposure to phenoxyherbicides used in Vietnam has been a great concern to the veterans. In addition to the Air Force Ranch Hand personnel, Army Chemical Corps personnel who served in Vietnam are thought to have had some of the highest herbicide exposures. The Department of Veterans Affairs commenced a study of veterans who served in Vietnam as members of the Army Chemical Corps and a comparison cohort of Army Chemical Corps personnel who served elsewhere. A total of 2872 Vietnam veterans and 2737 non-Vietnam veterans who served in the Army Chemical Corps were identified for inclusion in a telephone health interview survey with a random 20% sample of veterans receiving serum dioxin and other congeners assessments. In a feasibility study which included 284 Vietnam veterans and 281 non-Vietnam veterans, 100 serum assessments were conducted of which 95 were included in the analysis. Vietnam veterans with a history of spraying herbicides were found to have a statistically significant elevation in their current serum 2,3,7,8-TCDD concentrations compared to non-Vietnam veterans without a spray history (P = 0.05). Other 2,3,7,8-substituted dioxins levels were comparable to the levels found in the non-Vietnam veterans. This feasibility study demonstrated that serum dioxin concentrations from a sample of the study participants can be used to identify exposure variables in the health survey that can serve as a surrogate measure of phenoxyherbicide exposure.     

Atmospheric deposition of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls in the Kanto Region, Japan

The atmospheric bulk (dry and wet) deposition of dioxins was investigated at four locations (Tokyo, Yokohama, Tsukuba, and Tanzawa) in the Kanto region (in Japan) over one year using a stainless-steel pot. Annual average polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/PCDF) deposition fluxes were estimated to be from 450 to 1300 ng/m2/yr, and the annual average TEQ fluxes from 5.7 to 17 ng-TEQ/m2/yr at the four locations. The PCDD/PCDF deposition flux was higher in winter than in summer. The deposition flux could be related to ambient temperature, particularly for less chlorinated PCDDs/PCDFs, while the deposition flux is not necessarily related to the amount of precipitation. The PCDD/PCDF deposition flux increased as the particle deposition flux increased, for the winter samples. Based on the ratio of the PCDD/PCDF deposition fluxes to the particle deposition fluxes, the contribution of the reentrainment of soil particles to the TEQ of PCDD/PCDF deposition was considered to be negligible in this region. Based on the air concentrations monitored near our deposition sampling points by the municipalities, the ratio of the annual deposition flux to the annual average air concentration was roughly estimated to be 0.082 cm/s. The range of deposition flux in the Kanto region was estimated to be from 1.5 to 31 (median: 9.8) ng-TEQ/m2/yr based on the range of air concentration data measured by the municipalities. The total annual deposition flux in the entire Kanto region was estimated to range from 50 to 900 g-TEQ/yr (median 320 g-TEQ/yr). This estimated flux was of the same order as the sum of estimated emissions from municipal solid waste incinerators and industrial waste incinerators in the Kanto region. The contributions of dioxin-like PCBs in Yokohama, Tsukuba, and Tanzawa depositions were less than 10% of the total TEQ; however, in Tokyo it was almost equal to or more than 50%.     

Non-aqueous-phase-liquid breakthrough during evaporative drying of clay barriers

In this study, an attempt has been made to model a real field scenario, whereby an initially almost saturated clay liner in a waste site is gradually drying, due to evaporation at its lower boundary. A detailed conceptual model that deals with the penetration and breakthrough of non-aqueous-phase-liquid (NAPL) in clay liners is introduced. Water content of clay samples was monitored during ambient evaporation through apertures at the base of sample holders. Clay drying rate served as the primary parameter for the NAPL breakthrough study. The interconnection between drying rates, structural damage formation (cracks and suction) and NAPL penetration is especially addressed. The processes taking place in the clay samples during drying appear to be associated with the capillary effects between the different fluid phases in the vicinity of either the NAPL-clay or the clay-air boundaries. A conceptual model of NAPL penetration and breakthrough of the clay layer has been considered, based on both indirect and direct observations of structural damages produced on either clay boundaries. A mutual interaction between these two boundaries is suggested and discussed. NAPL breakthrough is suggested to take place through cracks initiated on the upper soil surface.