Investigation of activated carbon/ethanol for low temperature adsorption cooling

Commercially available adsorption cooling systems use water/silica gel, water/zeolite and ammonia/ chloride salts working pairs. The water-based pairs are limited to work above 0°C due to the water high freezing temperature, while ammonia has the disadvantage of being toxic. Ethanol is a promising refrigerant due to its low freezing point (161 K), nontoxicity, zero ozone depletion, and low global warming potential. Activated carbon (AC) is a porous material with high degree of porosity (500–3000 m²/g) that has been used in wide range of applications. Using Dynamic Vapour Sorption (DVS) test facility, this work characterizes the ethanol adsorption of eleven commercially available activated carbon materials for cooling at low temperature of ?15°C. DVS adsorption results show that Maxsorb has the best performance in terms of ethanol uptake and adsorption kinetics compared to the other tested materials. The Maxsorb/ethanol adsorption process has been numerically modeled using computational fluid dynamics (CFD) and simulation results are validated using the DVS experimental measurements. The validated CFD simulation of the adsorption process is used to predict the effects of adsorbent layer thickness and packing density on cycle uptake for evaporating temperature of ?15°C. Simulation results show that as the thickness of the Maxsorb adsorbent layer increases, its uptake decreases. As for the packing density, the amount of ethanol adsorbed per plate increases with the packing density reaching maximum at 750 kg/m³. This work shows the potential of using Maxsorb/ethanol in producing low temperature cooling down to ?15°C with specific cooling energy reaching 400 kJ/kg.     

Predictors of poor outcomes among patients of acute methanol intoxication with particular reference to Sequential Organ Failure Assessment (SOFA) score

Environmental Science and Pollution Research - Methanol intoxication is a global problem with serious morbidities and mortalities. Apart from the lifelong disabilities experienced by methanol...     

Management of hospitals solid waste in Khartoum State

This research had been conducted during year 2012 to review existing data on hospital waste management for some of Khartoum town hospitals and to try to produce appropriate proposals acceptable for waste management and final treatment methods. The overall status of hospital waste management in Khartoum has been assessed through direct visits and designated questionnaires. Eight main hospitals were covered in the study with an overall bed capacity of 2,978. The current waste management practice observed at all studied hospitals was that most of waste, office, general, food, construction debris, and hazardous chemical materials were all mixed together as they are generated, collected, and finally disposed of. Only a small portion of waste in some hospitals (part of potentially infectious, body parts, and sharps) are collected separately and treated in a central incinerator. The estimated value of per bed generation rate in the studied hospitals was found to be 0.87 kg/day, which lies within the range for the low-income countries. In all studied hospitals, it was found that workers were working under very poor unsafe conditions with very low salaries ($35 to $45 per month on average). About 90 % were completely illiterate or had very low education levels. At the national level, no laws considering hospital waste, or even hazardous waste, were found; only some federal general environmental regulations and some procedures from town and city localities for controlling general municipal waste exist. At the hospital level, no policies or rules were found, except in the radiotherapy center, where they manage radioactive wastes under the laws of the Sudanese Atomic Agency. Urgent actions are needed for the remediation and prevention of hazards associated with this type of waste.     

Respiratory,hepatic, renal,and hematological disorders among adolescent females environmentally exposed to pesticides,Menoufia governorate,Egypt

Environmental Science and Pollution Research - Adolescent females are often environmentally exposed to pesticides by living near agricultural fields, by using pesticides at home, or by having...     

Occupational exposure to gasoline in gasoline station male attendants promotes M1 polarization in macrophages

Environmental Science and Pollution Research - Several studies have reported the toxicological implications of exposure to petroleum hydrocarbon fumes in animal models. There is little...     

Detection of oxidative stress and DNA damage in freshwater snail <Emphasis Type="Italic">Lymnea leuteola</Emphasis> exposed to profenofos

Extensive production and use of organophosphate pesticide in agriculture, has risen concerned about its ecotoxicity and risk assessment of insecticides, which are more important. Therefore, the present investigation was aimed to study the induction of oxidative stress and DNA damage by organophosphate insecticide profenofos (PFF) in freshwater snail Lymnea luteola (L. luteola). The median lethal value (96 h LC₅₀) of PFF was estimated as 1.26 mg/L for L. luteola in a semi-static system and on the basis of LC₅₀ value three concentrations viz., 0.126 (1/10 of LC₅₀, Sublethal I), 0.63 (1/2 of LC₅₀, Sublethal II) and 0.84 mg/L (2/3 of LC₅₀, Sublethal III) were determined. Snails were exposed to above-mentioned concentrations of PFF along with solvent control (acetone) and negative control for 96 h. The haemolymph was collected at 24 and 96 h of after treatment. In heamolymph of PFF exposed snail, lipid peroxide, glutathione reduced glutathione S transferase and superoxide dismutase activities at the tested concentrations significantly differ from those in the control. The genotoxicity induced in hemocytes of treated snails was measured by alkaline single cell gel electrophoresis assay. The data of this experiment demonstrated significantly enhancement of oxidative stress and DNA damage in the treated snails as compared to controls. Also, we observed statistically significant correlations of ROS with DNA damage (% tail DNA) (R² = 0.9708) for 24 h and DNA damage (R2 = 0.9665) for 96 h.

Results of the current experiment can be useful in risk evaluation of PFF among aquatic organisms. The study confirmed the use of comet assay for in vivo laboratory experiments using freshwater snail for selecting the toxic potential of industrial chemicals and environmental contaminants.

Open image in new window

     

Effects of physicochemical factors on PAH degradation by Planomicrobium alkanoclasticum

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants that are mutagenic, carcinogenic, and toxic to living organisms. Here, the ability and effectiveness of selected bacteria isolated from an oil‐contaminated area in biodegrading PAHs were evaluated, and the optimal conditions conducive to bacterial PAH biodegradation were determined. Of six bacterial isolates identified based on their 16S rRNA sequences, Planomicrobium alkanoclasticum could subsist on and consume nearly all hydrocarbons according to the 2,6‐dichlorophenolindophenol assay. The efficacy of this isolate at PAH biodegradation was then empirically confirmed. After 30 days of incubation, P. alkanoclasticum degraded 90.8% of the 16 PAH compounds analyzed and fully degraded eight of them. The optimum P. alkanoclasticum growth conditions were 35°C, pH 7.5, and NaNO₃ as the nitrogen source. Under these biostimulant conditions, P. alkanoclasticum degraded 91.4% of the total PAH concentration and completely decomposed seven PAHs after 15 days incubation. Hence, P. alkanoclasticum is an apt candidate for the biodegradation of PAHs and the bioremediation of sites contaminated by them.     

Life-cycle assessment: A survey of current implementation

Life-Cycle Assessment (LCA) is an analytical tool that evaluates the environmental consequences of a product, process, or activity across its entire life cycle. LCA is used internationally by government and industry to obtain a comprehensive perspective of the interactions between an activity and the environment and provides a method to systematically identify opportunities for improvement. The framework is integrated into environmental management programs motivated by market awareness, public perception, and cost savings. The use of LCA is driven by external forces such as eco-labels and the recent development of the ISO 14000 standards. However, LCA has many shortcomings that need to be addressed. The concerns of poor data quality, data availability, high implementation costs, subjectivity, and lack of standardization have sent LCA into a state of flux. In light of the recent surge of interest in LCA, the authors of this article have conducted a corporate survey that targets the implementation of LCA. Their goal is to determine the level of activity of LCA among known practitioners and to elucidate common themes. This article presents their findings from responses by 34 companies that were known to be actively involved in LCA or contemplating its future use.     

Potential health hazard of drinking water in restaurants and tea stalls

Potable and equitable drinking water (DW) is a fundamental human right and essential for human health. This study is conducted to assess the groundwater and jar water quality of the roadside restaurants and tea stalls used for drinking by the local people around the Gazipur City area in Bangladesh. Water samples from 173 restaurants and tea stalls are collected. The physico-chemical and biological parameters are analyzed according to the guidelines and standards. The results illustrate that the color, EC, and Mn of 41%, 80%, and 62% of the samples, respectively, exceed the WHO and Environmental Conservation Rules (ECR) standards. In addition, E. coli and total coliform exceeding the threshold standards are found in 47% and 64% of the water samples, respectively. The contamination of DW by fecal coliforms is confirmed and supported by prior studies, which indicates that the DW supplied in restaurants and tea stalls are unsafe because of the possible presence of pathogens. These may cause potential health hazards to consumers from various water-borne diseases. Poor sanitation, unhygienic practices, and improper disposal of wastewater are responsible for the microbial contamination of DW. So, the authorities in charge of these places should take the right regulatory steps, such as regular sanitation inspections, DW quality monitoring, hand-washing practices, and better sanitation in these places.