Optimal design of additional sampling pattern for drinking-water quality control

A crucial step in complementary studies of the water quality determination is to design the additional sampling pattern or, in other words, to determine the number and location of the additional samples. Since location and number of samples highly affect decisions’ uncertainties, and because sampling process is quite costly and time-consuming, optimization of the sampling pattern will enhance the efficiency and productivity. Solution of such an optimization problem requires defining an objective function and constraints. There exist many previous studies regarding locating additional samples in other environmental problems wherein the objective function is defined as the minimization of the kriging variance (based on the problem nature), but the point is that kriging variance is not sensitive to local variability. Since manner and extent of small-scale variations are both important and necessary in water quality studies, it is required to resolve this shortcoming of the traditional objective function. Solution is to make use of the combined variance consisting of kriging and local variances. In this study, the applicability and efficiency of the minimization of combined variance as the objective function of the additional sampling was adopted and proved for a salt marsh (east of Iran) on the basis of a simulated annealing-based algorithm. It was shown, practically, that the locational distribution of additional sampling points is quite logical and more compatible with experts’ proposed methods using this objective function (compared to the traditional one).     

Induction of apoptosis and cytokine markers in colon cancer cells by magnesium oxide (MgO) nanoparticles

Magnesium oxide nanoparticles (MgONP) are predominantly utilized in industrial products. This study was undertaken to elucidate the mechanisms underlying toxic effect of MgONP in human colon cancer (HT 29) cells over 48 hr period. Cytotoxicity was evaluated by using MTT and neutral red uptake assays. Data demonstrated that MgONP reduced cell viability in concentration- and time-dependent manner. MgONP induced oxidative stress by decreasing glutathione (GSH) concentrations and elevation of reactive oxygen species (ROS) and lipid peroxidation levels. Increased caspase-3 enzyme activity and greater condensed, damaged chromosome was observed following MgONP exposure in HT 29 cells. The level of interleukin-4 (IL-4), tumor necrosis factor (TNF-α), and DNA fragmentation were significantly higher in MgONP incubated cells. The results showed that MgONP-induced toxicity in HT 29 cells may be mediated through oxidative stress.     

Investigation on the effect of impact location height on pedestrian safety using a legform impactor dynamic model

Because of rapid increase in the urban population and hence road traffic, the vehicle–pedestrian crashes are more frequent and have become a major concern in road traffic safety. Though the bumper of a vehicle plays an important role to protect the vehicle body damage in low speed impacts, many bumpers particularly in larger vehicles are too stiff for pedestrian protection and safety. To prevent lower extremity injuries in car–pedestrian collisions, it is important to determine the loadings that car front structures impart on the lower extremities and the mechanisms by which injuries are caused. In the present work, a dynamic legform impactor model is introduced and validated against EEVC/WG17 criteria. The collision mechanism between a GMT bumper and the legform impactor model is investigated numerically using LS-DYNA software. The effect of the height of the impact point of bumper assembly to lower extremity injuries is also investigated. In this paper, it is shown that changing the local stiffness of bumper assembly due to the change in the height of the bumper and distribution of stiffness from upper parts of the bumper assembly to lower parts are the most important parameters in the pedestrian’s leg injuries. As lower extremity injuries are related to the lower bumper height, developing special legform impactors for different countries with different average person height seems essential in investigating the effect of people’s height on lower extremity injuries.     

Spatial analysis of mortality rate of pedestrian accidents in Iran during 2012–2013

Objectives: Considering the high mortality rate of pedestrians in traffic accidents in Iran, the present study aimed to determine the high-risk and low-risk areas of accidents resulting in pedestrian deaths and the spatial analysis of their mortality rates.

Methods: This cross-sectional study included 4,371 deceased pedestrians reported by the Legal Medicine Organization in Iran from March 2012 to March 2013. For spatial analysis, the collected data were entered into ArcGIS software version 10.2 and a spatial map of the mortality rate was drawn according to the distribution of data in the provinces. Using this software, high-risk and low-risk areas were identified by calculating the spatial autocorrelation of the data. The Moran’s index of road accident patterns was surveyed and high-risk and low-risk points were identified using the local Getis index.

Results: The age-standardized incidence rate was 6.8 per 100,000. After analyzing the data using ArcGIS software, the local Moran’s index showed a cluster pattern with a high mortality rate in 3 provinces of Mazandaran, Gilan, and Qazvin. In identifying high-risk and low-risk points, the local Getis index showed 3 hot spots with a confidence interval of 99% in Qom, Qazvin, and Mazandaran and 5 hot spots with a 95% confidence interval in Markazi, Tehran, Zanjan, Gilan, and Golestan provinces.

Conclusions: According to the cluster pattern of accidents in the 3 provinces and the presence of hot spots in 9 provinces, it is necessary to identify factors that increase the risk of death in the study provinces in order to reduce the mortality rate among pedestrians due to traffic accidents. Therefore, to reduce the pedestrian mortality rate, especially in high-risk provinces, some studies need to be conducted to determine the risk factors in pedestrian mortality.     

Sustainable multi-trip periodic redesign-routing model for municipal solid waste collection network: the case study of Tehran

Environmental Science and Pollution Research - Daily transportation of wastes due to its environmental, financial, and social aspects has been considered a challenging issue in developing...     

Transport and deposition of functionalized CdTe nanoparticles in saturated porous media

Comprehensive understanding of the transport and deposition of engineered nanoparticles (NPs) in subsurface is required to assess their potential negative impact on the environment. We studied the deposition behavior of functionalized quantum dot (QD) NPs (CdTe) in different types of sands (Accusand, ultrapure quartz, and iron-coated sand) at various solution ionic strengths (IS). The observed transport behavior in ultrapure quartz and iron-coated sand was consistent with conventional colloid deposition theories. However, our results from the Accusand column showed that deposition was minimal at the lowest IS (1mM) and increased significantly as the IS increased. The effluent breakthrough occurred with a delay, followed by a rapid rise to the maximum normalized concentration of unity. Negligible deposition in the column packed with ultrapure quartz sand (100mM) and Accusand (1mM) rules out the effect of straining and suggests the importance of surface charge heterogeneity in QD deposition in Accusand at higher IS. Data analyses further show that only a small fraction of sand surface area contributed in QD deposition even at the highest IS (100mM) tested. The observed delay in breakthrough curves of QDs was attributed to the fast diffusive mass transfer rate of QDs from bulk solution to the sand surface and QD mass transfer on the solid phase. Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis were used to examine the morphology and elemental composition of sand grains. It was observed that there were regions on the sand covered with layers of clay particles. EDX spectra collected from these regions revealed that Si and Al were the major elements suggesting that the clay particles were kaolinite. Additional batch experiments using gold NPs and SEM analysis were performed and it was observed that the gold NPs were only deposited on clay particles originally on the Accusand surface. After removing the clays from the sand surface, we observed negligible QD deposition even at 100mM IS. We proposed that nanoscale charge heterogeneities on clay particles on Accusand surface played a key role in QD deposition. It was shown that the value of solution IS determined the extent to which the local heterogeneities participated in particle deposition.     

Spatio-temporal assessment of land use dynamics and urbanization: linking with environmental aspects and DPSIR framework approach

Environmental Science and Pollution Research - Urbanization is the main force of the global environmental as well as land use land cover changes (LULC). Urbanization is caused by prompt increase in...     

Investigation of land use changes in rural areas using MCDM and CA-Markov chain and their effects on water quality and soil fertility in south of Iran

The purpose of the study is to predict drought changes in Dariun, Fars Province, and their impact on water and soil quality. To prepare drought, water, and soil quality zoning maps, Landsat satellite images and the kriging method were used. The fuzzy maps and weights for each parameter were then determined using fuzzy and analytic hierarchy process (AHP) methods. Additionally, cellular automata (CA)-Markov chains were used in order to predict the impact of drought changes on water and soil quality. Using the fuzzy-AHP method, water quality and soil fertility in 2020 were lower compared to previous years, mainly because of land use changes that increased pollution. Based on results of the Markov and CA-Markov chains, approximately 31% of the region will have very poor levels of soil fertility and water quality in 2050. Further, based on remote sensing indicators, it is determined that about 25% of the region will be at high risk of drought in 2050. Thus, if adequate management of the region is not done, the possibility of living in these areas may diminish in the coming years due to drought and deteriorated water and soil quality.

     

IRRIGATION PLANNING BASED ON WATER DEFICITS1

ABSTRACT: The deliberate underwatering of a larger land area, as practiced in Southern Asia, has provided impetus for a systematic investigation into the effects of designing projects for crop water deficits on Benefit-Cost performance. The study began with the derivation, from published experimental results, of functions relating ultimate crop yield to the magnitude and timing of water deficits, i.e., of the productivity of irrigation water. To obtain the net benefit of the project, the relation between the harvested area and output and the on-farm production costs was then suggested. The cost of supplying the irrigation water to the proposed area and of distributing and applying it to the field was determined, thus completing the Benefit-Cost equation. A computer simulation model was then established to search for the irrigation project design capacity and area to maximize the net present value in the Benefit-Cost analysis for the development proposed.     

Biofuel types and membrane separation

Environmental Chemistry Letters - Global warming induced by greenhouse gases is major issue worldwide. There is therefore a need to develop renewable sources of energy, such as biofuels. Here, we...