Spectroscopic Analysis of NIR-Dye Sensitization in Bulk Heterojunction Polymer Solar Cells

The photovoltaic conversion efficiency for near-infrared (NIR) sunlight is improved successfully by dye sensitization of bulk heterojunction polymer solar cells, in which the active layer was prepared by a ternary blend of poly(3-hexylthiophene), a fullerene derivative (1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene), and an NIR dye, silicon phthalocyanine bis(trihexylsilyl oxide). The mechanism of the NIR-dye sensitization is studied by femtosecond transient absorption spectroscopy.     

Removal of thiobencarb in aqueous solution by zero valent iron

A cost-effective method with zero valent iron (ZVI) powder was developed for the purification of thiobencarb (TB)-contaminated water. The removal treatment was performed in the batch system. A sample solution of 10 ml containing 10 microg ml(-1) of TB could be almost completely treated by 100mg of ZVI at 25 degrees C for 12h of treatment time. Since the formation of chloride ion in the aqueous solution during the treatment of TB was observed, the removal of TB with ZVI may contain two processes: reduction (degradation) and adsorption. Because the present treatment for TB is simple, easy handling and cheap, the developed technology with ZVI can contribute to the treatment of agricultural wastewaters.     

Separation and characterization of the colored material from sugarcane molasses

The colored material (X) was effectively separated from sugarcane molasses using reversed-phase chromatography. Characterization of the molecular structure of sample X was performed using infrared absorption (IR) spectrometry, mass spectrometry (MS), and dynamic light scattering (DLS). The IR spectrum was similar to that of commercial humic acid, and the MS analysis showed that the sample possessed relatively small heterogeneous molecules with molecular masses around 234, 446, 657, 868, and 1079 Da. On the other hand, X sample showed an inhibitory activity toward the cysteine proteinase papain. Furthermore, the inhibitory (G-1) and weak inhibitory (G-2) fractions were separated from sample X using gel permeation chromatography. Samples G-1 and G-2 inhibited papain partial-noncompetitively and had the inhibition constants of 5.01 x 10(-5) and 1.08 x 10(-3)M, respectively. Interestingly, in the DLS experiment, the Stokes radius of sample G-1 was approximately 2 nm, about twice one of sample G-2.     

Sources and distribution of hexabromocyclododecanes (HBCDs) in Japanese river sediment

The distribution of hexabromocyclododecane (HBCD) in the sediment of three Japanese rivers with different characteristics (i.e., population and potential source in the catchment) was investigated and compared with the results estimated using a multimedia fate model (ChemCAN). High concentrations of HBCD in sediments in the range of 134-2060 ng g(-1) were found in a river receiving textile wastewater. This contrasted with the much lower concentrations (0.8-4.8 ng g(-1)) observed for an urban river (with a surrounding population of 1.8 million). The medians of observed HBCD concentrations in each river were close to those estimated based on the assumed input source (e.g., 1810 ng g(-1) for the observed median concentration, and 1436 ng g(-1) for the estimation, in the Kuzuryu River). These results demonstrated the importance of considering source contributions of HBCD, including both industrial and consumer sources, to aquatic environments, for reliable risk management.     

Perceived predation risk and mate defense jointly alter the outcome of territorial fights

Virtually all animal conflicts occur over access to mates or resources that affect survival, the two key components of fitness. In this paper, we report that predation risk and mate defense jointly affect the outcomes of contests between male sand crabs (Scopimera globosa) for burrows in which crabs mate and take shelter from predators. We observed the contests under three different conditions: (1) the natural condition of low predation risk and without the presence of a female; (2) the first experiment in which we imposed upon only intruding males the perception of predation risk—by digging them from their burrows, capturing and handling them, and placing them into other males’ burrows—to increase the value of the burrows for the intruders as shelter, and (3) the second experiment in which we repeated this treatment but increased the resource value of the burrow to the resident by placing a female in his burrow. The difference in body size between contestants was the main determinant of victory in all analyses. However, perceived predation risk also partly affected the outcomes of the fights: The motivated intruders were likely to win even when they were a little smaller than the residents. In addition, defense of a female had a significant effect on the outcomes of fights: The motivated residents won more fights than the motivated intruders, indicating that these two treatments caused asymmetric increases of the resource value. This is the first report of two external factors simultaneously raising resource value, affecting motivation of contestants, and altering the outcome of fights.     

Rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar

The rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar was carried out in a hydrogen atmosphere at 1073 K and 973 K. The assumed oligomers were partially pyrolyzed epoxy resin with biomass tar as solvent for the resin. The product distributions obtained from rapid hydropyrolysis of phenol and bisphenol-A are shown. We also discuss the effects of reaction temperature and hydrogen partial pressure on the product yield. In particular, more phenol was produced from bisphenol-A at 973 K than at 1073 K. The yield of methane, which was the final hydropyrolysis product, increased with increasing hydrogen partial pressure, whereas benzene and phenol were believed to behave as intermediate products in the hydropyrolysis reaction. The results suggest that phenol could be obtained with high selectivity from tar by optimizing the reaction conditions.     

Thermal cracking of oils from waste plastics

Thermal cracking of decomposed waste plastic oil produces a good yield of olefins. The solvent extraction of such waste plastic oil seems to be efficient for increasing gas yields and recycling monomers. To assess the potential of monomer recovery from municipal waste plastics, the oils were cracked using a laboratory-scale quartz-tube reactor. The waste plastic oils were provided by two commercial plants of the Sapporo Plastic Recycle Co. and the Dohoh Recycle Center Co. in Japan. A model waste plastic oil made in a laboratory was also examined. Yields of ethene, propene, and other products were measured at different temperatures. Two-step pyrolysis reduces coking compared with the direct thermal degradation of plastics. The raffinates from waste plastic oils extracted by sulfolane were also cracked. The primary products were almost the same as those from nontreated oils. The maximum total gas yield was 78wt%–85wt% at 750°C, an increase of about 20wt% compared with that of nonextracted oil. Solvent extraction removes stable aromatic hydrocarbons such as styrene, which is more coked than cracked.     

An empirical model of soil chemical properties that regulate methane production in Japanese rice paddy soils

To understand which soil chemical properties are the best predictors of CH4 production in rice paddy soils, a model was developed with empirical data from nine types of rice soils collected around Japan and anaerobically incubated at 30 degrees C for 16 wk in laboratory conditions. After 1, 2, 4, 8, and 16 wk of incubation, CO2, CH4, and Fe(II) were measured to understand soil organic matter decomposition and iron (Fe) reduction. Available N (N ava) was also measured at the end of incubation. The results showed that decomposable C and reducible Fe are two key parameters that regulate soil CH(4) production (P CH4). There was a significant relationship between decomposable C and available N (N ava) (r2 = 0.975**). Except for a sandy soil sample, a significant relationship between total Fe (Fe total) and reducible Fe was found. From this experiment, a simple model of soil CH4 production was developed: P CH4 = 1.593N(ava) - 2.460Fe total/1000 (each unit was mg kg(-1) soil). After simulated CH4 production by two soil chemical properties as above, there was a significant consistency between model simulation and actual measurement (r2 = 0.831**).