Error propagation in pesticide residue measurements estimated by computational simulations and inter-laboratory sample analysis

An assessment of the error associated with conventional pesticide residue analysis has been conducted based on computer simulations and inter-laboratory residue analysis. Computational simulations were conducted based on (i) typical performance and regulatory acceptance criteria of analytical methods, and (ii) field residue distributions. In addition, field samples with incurred residues were sent to different private laboratories and the results compared. The relative difference in pesticide residues obtained when samples from the same field or produce lot are analyzed at separate laboratories was used to quantify the uncertainty associated with residue analyses performed using common analytical technology, and methods that are in compliance with current regulatory requirements. The study showed that differences of > 100% are common and should be expected when samples from the same crop are analyzed at different laboratories. The results also suggest that the error within residue measurements can be particularly detrimental when a result is reported near the maximum residue limit (MRL).     

Environmental and lifestyle factors affect benzene uptake biomonitoring of residents near a petrochemical plant

Background

We monitored urinary benzene excretion to examine factors affecting benzene uptake in a sample of the general population living near a petrochemical plant.

Methods

Our study population included 143 subjects: 33 petrochemical plant workers (W) with low level occupational benzene exposure; 30 residents in a small town 2 km from the plant (2kmR); 26 residents in a second small town located 2 to 4 km from the plant (4kmR); and 54 urban residents 25 km from the plant (25kmR). Exposure to benzene was evaluated by personal air sampling during one work-shift for the W group, and from 8.00 to 20:00 for general population subgroups, and by urinary benzene (BEN-U).

Results

Median airborne benzene exposure was 25, 9, 7 and 6 μg/m³ benzene among the W, 2kmR, 4kmR, and 25kmR subgroups, respectively; the highest level was found among the workers, while there was no significant difference among the other groups. Median BEN-U was 2 to 14-fold higher in smokers compared to non-smokers; among non-smokers BEN-U was the highest in W (median 236 ng/L), and lower in the 2kmR (48 ng/L) and 4kmR (63 ng/L) subgroups than in the 25kmR (120 ng/L) subgroup. A multiple linear regression analysis, explaining up to 73% of BEN-U variability, confirmed that active smoking and airborne benzene most strongly affected BEN-U. Among the non-smoking, non-occupationally exposed study subjects, a positive association was found between BEN-U and the distance of residence from the plant. This association was explained by increased exposure to urban traffic emissions in the study group residing at a greater distance from the plant. Environmental tobacco smoke had a marginally positive role.

Conclusion

Among factors affecting benzene uptake in non-occupationally exposed individuals, urban residence contributes to benzene exposure more than residing in close proximity to a petrochemical plant.     

Determining C/N ratios for typical organic wastes using biodegradable fractions

It is well established that an optimal aerobic and anaerobic microbial metabolism is achieved with a C/N ratio between 20 and 30. Most studies are currently based on chemically-measured carbon and nitrogen contents. However, some organic wastes can be composed of recalcitrant carbon fractions that are not bioavailable. To know the biodegradable C/N ratio, two different methods to determine the aerobic and anaerobic biodegradable organic carbon (BOC_AE and BOC_AN) are proposed and used to analyze a wide variety of different organic samples. In general, raw wastes and digested products have more amount of BOC_AE. On the contrast, the samples collected after an aerobic treatment have higher content of BOC_AN. In any case, all the BOC fractions are lower than the total organic carbon (TOC). Therefore, the C/N ratios based on BOC are always lower than the total C/N ratio based on the TOC measure. The knowledge of the real bioavailable C/N ratio is crucial for the biological treatments of organic materials. To reduce the test time necessary for BOC determination, the values of BOC for all the samples obtained at different times were compared and correlated with the final BOC. A method that allows for the determination of BOC_AE in 4 d is proposed. In relation to the anaerobic assay, the biogas potential calculated after 21 and 50 d was positively correlated with the final potential defined after 100 d of assay.     

Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants

A common characteristic of carbon capture and storage systems is the important energy consumption associated with the CO₂ capture process. This important drawback can be solved with the analysis, synthesis and optimization of this type of energy systems. The second law of thermodynamics has proved to be an essential tool in power and chemical plant optimization. The exergy analysis method has demonstrated good results in the synthesis of complex systems and efficiency improvements in energy applications.In this paper, a synthesis of pinch analysis and second law analysis is used to show the optimum window design of the integration of a calcium looping cycle into an existing coal power plant for CO₂ capture. Results demonstrate that exergy analysis is an essential aid to reduce energy penalties in CO₂ capture energy systems. In particular, for the case of carbonation/calcination CO₂ systems integrated in existing coal power plants, almost 40% of the additional exergy consumption is available in the form of heat. Accordingly, the efficiency of the capture cycle depends strongly on the possibility of using this heat to produce extra steam (live, reheat and medium pressure) to generate extra power at steam turbine. The synthesis of pinch and second law analysis could reduce the additional coal consumption due to CO₂ capture 2.5 times, from 217 to 85 MW.     

First flush in a combined sewer system

Pollutant first flush was examined in an urban catchment with area of 12.7 ha and drained by a combined sewer system located in northern Italy. A total of 23 rainfall-runoff events were monitored and 281 samples were analyzed. The selected quality parameters were biochemical oxygen demand, chemical oxygen demand, suspended solids, settleable solids, total phosphorus, total nitrogen, ammonium nitrogen, lead, and zinc, specific conductivity and hydrocarbons. A subset of representative storms was selected for first flush analysis. The catchment presented a strong first flush for almost all storms and most constituents. The analysis shows that treating the maximum amount of the early part of the runoff is a better strategy than treating a constant flow rate. Best management practices that can treat or store the first runoff are favored in this kind of system for these water quality parameters.     

Waste management of electric and electronic equipment: comparative analysis of end-of-life strategies

This article analyzes diverse aspects of the waste management of electronic and electric equipment. The scope of the study focuses on end-of-life strategies currently implemented in industrialized economies such as Japan, the United States, and the European Union. The objective is a comparative analysis of such strategies in order to identify logistic issues that may contribute to the further improvement of waste management policies. The results indicate that although all strategies follow the extended producer responsibility principle, in practice several logistic differences arise due to particular interpretations of the concept. In general, it was observed that a direct comparison is rather difficult since the strategies consider different legal frameworks, they cover different types and numbers of products, and the resultant mass flows and related operational costs are highly context-dependent variables. Therefore, it is not possible to indicate which strategy presents the highest overall efficiency. The study concludes that a little contribution is feasible if the advantages and weaknesses of the models depicted and discussed here are considered in further regulatory decisions.Extended version of the poster presentation A comparative analysis of end-of-life strategies for home appliances in Japan, America, and the European Union, accepted at the 31st Annual Meeting of Environmental Systems Research, Japan Society of Civil Engineers (JSCE), October 24–25, 2003, Kitakyushu, Japan     

A stochastic model for the use of a country park

The subject of this theoretical study is a country park with a very delicate natural environment, located near large urban areas, as a result of which it receives a heavy inflow of visitors.The problem is that of determining the best organization of the park to achieve a distribution of visitors which is compatible with the protection of the natural environment. Therefore a mathematical model is sought which describes the distribution of visitors in relation to the various zones within the park.In this paper the mathematical model and its subsequent calibration are described.     

Individual- and population-level responses of a keystone predator to geographic variation in prey

Investigating how food supply regulates the behavior and population structure of predators remains a central focus of population and community ecology. These responses will determine the strength of bottom-up processes through the food web, which can potentially lead to coupled top-down regulation of local communities. However, characterizing the bottom-up effects of prey is difficult in the case of generalist predators and particularly with predators that have large dispersal scales, attributes that characterize most marine top predators. Here we use long-term data on mussel, barnacle, limpet, and other adult prey abundance and recruitment at sites spread over 970 km to investigate individual- and population-level responses of the keystone intertidal sunstar Heliaster helianthus on the coast of Chile. Our results show that this generalist predator responds to changes in the supply of an apparently preferred prey, the competitively dominant mussel Perumytilus purpuratus. Individual-level parameters (diet composition, per capita prey consumption, predator size) positively responded to increased mussel abundance and recruitment, whereas population-level parameters (density, biomass, size structure) did not respond to bottom-up prey variation among sites separated by a few kilometers. No other intertidal prey elicited positive individual predator responses in this species, even though a large number of other prey species was always included in the diet. Moreover, examining predator-prey correlations at approximately 80, 160, and 200 km did not change this pattern, suggesting that positive prey feedback could occur over even larger spatial scales or as a geographically unstructured process. Thus individual-level responses were not transferred to population changes over the range of spatial scales examined here, highlighting the need to examine community regulation processes over multiple spatial scales.     

Survey of deep-dwelling red coral (<Emphasis Type="Italic">Corallium rubrum</Emphasis>) populations at Cap de Creus (NW Mediterranean)

The distribution and population structure of the eurybathic gorgonian Corallium rubrum were studied off Cap de Creus (Costa Brava, Northwestern Mediterranean Sea). Red coral is endemic to the Mediterranean Sea and the adjacent NE Atlantic coast, where it has been over exploited for centuries. This study presents, the first quantitative data on the spatial distribution and structure of a population extending between 50 (common SCUBA limits) and 230 m depth, and compared it with shallow populations previously studied in the same area. Different remotely operated vehicles (ROV) and two methodological approaches were employed during four cruises between 2002 and 2006: 1-Extensive surveys: sea to coast transects in which red coral density and patch frequency were recorded; 2-Intensive surveys, in which parameters describing colony morphology were recorded. Most of the hard substrate between 50 and 85 m depth was inhabited by red coral colonies, showing a patch frequency of 8.3 ± 7.9 SD patches per 100 m-transect (total transect area: 34 m²), and within-patch colony densities of 16–376 colonies m⁻² (mean of 43 ± 53 colonies m⁻²). Below 120 m depth red coral was less abundant, and rather than forming dense patches as in shallow water, isolated colonies were more common. The population structure differed between sites that are easily accessible to red coral fishermen, and remote ones (both at similar depth, 60–80 m), as colonies in easily accessible locations were smaller in height and diameter, and showed a less developed branching pattern. At shallower locations (10–50 m depth) the population structure was significantly different from those at deeper locations, due to the heavy harvesting pressure they are exposed to in the shallows. Twenty-five to forty-six percentage of the deeper colonies were taller than 6 cm, while only 7–16% of the shallow water colonies exceeded 6 cm colony height. Forty-six to seventy-nine percentage of the colonies in deeper waters were large enough to be legally harvested, while only 9–20% of the shallow water colonies met the 7 mm legal basal diameter to be collected. The branching pattern was also better developed in deeper colonies, as up to 16% of the colonies showed fourth order branches, compared to less than 1% of the shallow water colonies (of which 96% consisted of only one single branch). The results thus confirm that C. rubrum populations above 50 m depth are exposed to a higher harvesting intensity than deeper populations in the same area.