What have we known so far about microplastics in drinking water treatment? A timely review

• 23 available research articles on MPs in drinking water treatment are reviewed. • The effects of treatment conditions and MP properties on MP removal are discussed. • DWTPs with more steps generally are more effective in removing MPs. • Smaller MPs (e.g.,<10 μm) are more challenging in drinking water treatment. Microplastics (MPs) have been widely detected in drinking water sources and tap water, raising the concern of the effectiveness of drinking water treatment plants (DWTPs) in protecting the public from exposure to MPs through drinking water. We collected and analyzed the available research articles up to August 2021 on MPs in drinking water treatment (DWT), including laboratory- and full-scale studies. This article summarizes the major MP compositions (materials, sizes, shapes, and concentrations) in drinking water sources, and critically reviews the removal efficiency and impacts of MPs in various drinking water treatment processes. The discussed drinking water treatment processes include coagulation-flocculation (CF), membrane filtration, sand filtration, and granular activated carbon (GAC) filtration. Current DWT processes that are purposed for particle removal are generally effective in reducing MPs in water. Various influential factors to MP removal are discussed, such as coagulant type and dose, MP material, shape and size, and water quality. It is anticipated that better MP removal can be achieved by optimizing the treatment conditions. Moreover, the article framed the major challenges and future research directions on MPs and nanoplastics (NPs) in DWT.     

The detection of SARS-CoV-2 RNA in indoor air of dental clinics during the COVID-19 pandemic

Environmental Science and Pollution Research - In the indoor environment of dental clinics, dental personnel and patients are exposed to a risk of infection because of the transmission of...     

Temperature,salinity and water-age variations in a tidal creek network,Bushehr Port,Iran

The spatio-temporal variability of temperature and salinity was studied for a creek network and its adjacent coastal waters along the northwestern coast of the Persian Gulf during warm and cold months. Salinity variations and tidal fluctuations were found to be out of phase throughout the creek. Temperature variations at the creek were exhibit a direct correlation with tidal fluctuations during cold months and were inversely related during warm months. The creek water was colder (warmer) than offshore water during the cold (warm) season. The salinity values observed inside this inverse estuary were higher during the warm season than the corresponding values during the cold season due to a change in evaporation rates; while the open water salinity had an opposite pattern. Using salinity as a tracer, the water-age (WA) was calculated, which shows almost linear increase from the mouth to the head. The maximum WA increases from ~10 days in winter to ~30 days in summer due to the corresponding increase in longitudinal salinity gradient. Based on the calculated non-dimensional Peclet number, the diffusion process is more rapid than the advection process in this water body, especially during the cold season.     

Correction to: Water‑induced erosion potentiality and vulnerability assessment in Kangsabati river basin,eastern India

Environment, Development and Sustainability -     

Performance analysis of sustainable supply networks with bounded,discrete, and joint factors

Environment, Development and Sustainability - The majority of data envelopment analysis (DEA) research studies evaluate the sustainability of processes with real-valued factors and individual role,...     

High-risk behaviors while driving: A population-based study from Iran

Objective: Traffic injuries are becoming one of the most important challenges of public health systems. Because these injuries are mostly preventable, the aim of this study is to evaluate the four main high-risk behaviors while driving.

Methods: This cross-sectional study was conducted on a random sample from the population of Mashhad, Iran, in 2014. A checklist and a previously validated questionnaire for the transtheoretical stages of change model (TTM) were used for data collection. Statistical analyses were performed using SPSS 11.5 software with P <.05 statistically significant.

Results: Totally 431 individuals were included with a mean age of 30 ± 11.3 years. Forty-three percent (183) were male. The TTM model revealed that participants were mostly in pre-actional phases regarding not using a cell phone while driving (80%), fastening the driver's seat belt (66%), front seat belt (68%), and rear seat belt (85%) The penalty was a protective factor only for using cellphone (odd ratio [OR] = 0.82, 95% confidence interval [CI], 0.68–0.98). Lower education (OR = 0.12, 95% CI, 0.01–0.94) and male gender (OR = 0.35, 95% CI, 0.14–0.83) were indicative of lower rates of fastening the front and rear seat belts.

Conclusion: The stages of change model among study participants is a proper reflection of the effectiveness of the current policies. More serious actions regarding these high-risk behaviors should be considered in legislation.     

Survey of discomfort glare from the headlamps of cars widely used in Iran

Objective: On 2-lane roads, discomfort glare can cause annoyance, discomfort, inconvenience, stress, and fatigue to drivers, posing a risk of accidents. The aim of this study is to evaluate discomfort glare from the headlamps of cars widely used in Iran.

Methods: The discomfort glare of new vehicles including Pride Saba model GTX, Pride Model 131SL, Samand Soren, Peugeot 405, Megane, and Peugeot Pars was examined at distances of 5 to 100 m at a background luminance of 50 cd/m² (late twilight/early dawn lighting) and 1 cd/m² (nighttime) using Schmidt-Clausen and Bindels model and de Boer's subjective scale.

Results: According to the de Boer scale, at a background luminance of 50 cd/m², the discomfort glare for all studied vehicles was between 1.98 and 4.05 in high-beam mode and between 3.5 and 5.4 in low-beam mode. At a background luminance of 1 cd/m², discomfort glare was between 0.41 and 2.48 in high-beam mode and between 1.93 and 3.84 in low-beam mode. In high-beam mode, the average levels of discomfort glare of these vehicles gradually increased when the distance between cars was reduced by up to about 20 m. In low-beam mode, there was no discomfort glare up to a vehicle distance of 40 m. In addition, at an angle of 1.15°–5.73° between the line of sight and light of vehicles in high-beam mode, the level of discomfort glare was increased, but at an angle of 5.73°–22.9° the level of discomfort glare was reduced. In low-beam mode at an angle of 2.86°–22.9°, the level of discomfort glare was almost identical. The results show that in high-beam mode and with a 100-m distance between vehicles as well as in low-beam mode at intervals of less than 40 m between cars, discomfort glare is created.

Conclusion: It can be concluded that by providing solutions such as installing road lighting system, an increase in luminance of roads, separating or widening road lanes, increasing the lateral distance between vehicles, and increasing the angle between lighted vehicles and drivers can noticeably reduce discomfort glare.     

Dimensional Stability and Water Uptake Properties of Cement-Bonded Wood Composites

This study was carried out to explore the possibility of making cement-bonded composite building products using eucalypt (Eucalyptus camaldulensis) and poplar (Populus deltoides). The experimental design consisted of three treatments—mixture of fibrous materials, cement and calcium chloride (CaCl₂) contents. Some physical properties, vis. water absorption (WA) and thickness swelling (TS), were investigated. The ratio of woodwool : cement was 40:60 and 60:40 by weight. Results showed that, water uptake increased with increasing woodwool content. In addition, boards fully made with poplar woodwools had superior properties compared to the eucalypt and mixed woodwools. The presence of eucalypt woodwools in mixture of fibrous materials typically resulted in increase in TS and WA. It is interesting to note that a dose of 5% of CaCl₂ by weight of cement can enhance the effect of cement. Application of Duncan’s Multiple Range Test for the mean values of the results showed that the effects of all variables and their interactions on the mechanical properties in terms of TS and WA were highly significant.