Evaluation of membrane bioreactor for hypersaline oily wastewater treatment

Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m³ day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m³ day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS.     

Urbanization reduces resource use efficiency of phytoplankton community by altering the environment and decreasing biodiversity

Urbanization often exerts multiple effects on aquatic and terrestrial organisms, including changes in biodiversity, species composition and ecosystem functions. However, the impacts of urbanization on river phytoplankton in subtropical urbanizing watersheds remain largely unknown. Here, we explored the effects of urbanization on phytoplankton community structure（i.e., biomass, community composition and diversity） and function（i.e., resource use efficiency） in a subtropical river at watershed sca...     

Spatial systems approach to sustainable development: A conceptual framework

Even though “sustainable development” seems to have emerged as the development paradigm of the 1990s, a great deal of vagueness still surrounds the meaning, definition, and theoretical underpinnings of the concept. There is also a general lack of emphasis on the spatial dimension of sustainable development when developing relevant conceptual or environmental accounting frameworks. In clarifying the concept, this article proposes a definition that explicitly incorporates the temporal as well as the spatial dimension of sustainability. It also develops a logically consistent conceptual framework for the analysis and evaluation of sustainable development, following a spatial systems approach. Five interconnected aspatial subsystems or subsets of a spatial system are identified and their respective operational dimensions discussed. A proposed composite index calleddegree of stainable development (DSD) and its five component indicators are also outlined. The difficulties involved in operationalizing the DSD measure and the conceptual framework are noted, and the various tasks that need to be undertaken in this regard are specified. It is concluded that future research utilizing the proposed conceptual framework should not only foster the development of appropriate methodologies for the comparative evaluation of sustainable development at global, national, or regional scales, but also offer insights to appropriate decision makers at various levels regarding available options and alternative actions for the healthy development of their respective societies.     

Removal of dye using peroxidase-immobilized Buckypaper/polyvinyl alcohol membrane in a multi-stage filtration column via RSM and ANFIS

Environmental Science and Pollution Research - The feasibility and performance of Jicama peroxidase (JP) immobilized Buckypaper/polyvinyl alcohol (BP/PVA) membrane for methylene blue (MB) dye...     

Particulate air quality model predictions using prognostic vs. diagnostic meteorology in central California

Comparisons were made between three sets of meteorological fields used to support air quality predictions for the California Regional Particulate Air Quality Study (CRPAQS) winter episode from December 15, 2000 to January 6, 2001. The first set of fields was interpolated from observations using an objective analysis method. The second set of fields was generated using the WRF prognostic model without data assimilation. The third set of fields was generated using the WRF prognostic model with the four-dimensional data assimilation (FDDA) technique. The UCD/CIT air quality model was applied with each set of meteorological fields to predict the concentrations of airborne particulate matter and gaseous species in central California. The results show that the WRF model without data assimilation over-predicts surface wind speed by ～30% on average and consequently yields under-predictions for all PM and gaseous species except sulfate (S(VI)) and ozone(O₃). The WRF model with FDDA improves the agreement between predicted and observed wind and temperature values and consequently yields improved predictions for all PM and gaseous species. Overall, diagnostic meteorological fields produced more accurate air quality predictions than either version of the WRF prognostic fields during this episode. Population-weighted average PM_2.5 exposure is 40% higher using diagnostic meteorological fields compared to prognostic meteorological fields created without data assimilation. These results suggest diagnostic meteorological fields based on a dense measurement network are the preferred choice for air quality model studies during stagnant periods in locations with complex topography.     

Planetary Stewardship in an Urbanizing World: Beyond City Limits

Cities are rapidly increasing in importance as a major factor shaping the Earth system, and therefore, must take corresponding responsibility. With currently over half the world’s population, cities are supported by resources originating from primarily rural regions often located around the world far distant from the urban loci of use. The sustainability of a city can no longer be considered in isolation from the sustainability of human and natural resources it uses from proximal or distant regions, or the combined resource use and impacts of cities globally. The world’s multiple and complex environmental and social challenges require interconnected solutions and coordinated governance approaches to planetary stewardship. We suggest that a key component of planetary stewardship is a global system of cities that develop sustainable processes and policies in concert with its non-urban areas. The potential for cities to cooperate as a system and with rural connectivity could increase their capacity to effect change and foster stewardship at the planetary scale and also increase their resource security.     

High compressive strength of home waste and polyvinyl acetate composites containing silica nanoparticle filler

Simple mixing and hot pressing methods were used to make composites from home waste—in particular, paper and dry leaves—using polyvinyl acetate (PVAc) as an adhesive and silica nanoparticles as filler. The optimum composition for the strongest composites, in terms of compressive strength, had a mass ratio of silica nanoparticles/PVAc/(paper + dry leaves) of 3:80:280. With this mass ratio, a compressive strength of 68.50 MPa was obtained for samples prepared at a pressing temperature of 150°C, pressing pressure of 100 MPa, and pressing time of 20 min. The addition of silica nanoparticles increased the compressive strength by about 50%, compared with composites made without the addition of nanosilica (45.60 MPa). Higher compressive strength was obtained at a higher pressing pressure. At a pressing pressure of 120 MPa, pressing temperature of 150°C, and pressing time of 20 min, a compressive strength of 69.10 MPa was obtained. When the pressing time was increased to 45 min at a pressing pressure of 120 MPa, a compressive strength of 84.37 MPa was measured. A model was also proposed to explain the effects of pressing pressure and pressing time on compressive strength. The model predictions were in good agreement with the experimental data.     

Distributed inner states TiO2-coated plastic fibers as photocatalysts for decomposing organic pollutants in water

A new method for decomposing organic pollutants in water is proposed. First, we used less pure titanium dioxide (TiO₂) particles as a photocatalyst material to achieve an absorption band that would be as wide as the spectrum for visible sunlight. The TiO₂ particles were coated onto the surface of transparent plastic fibers and used to decompose test solutions of rhodamine that were placed in open sunlight for several days. We observed an effective decomposition, and after completing the decomposition process, the fibers could be removed easily from the cleaned water leaving no TiO₂ in the water. Because there was no significant change in the elemental composition of the fiber surface after being used for cleaning the water, the coated fiber can be used repeatedly.     

Impact of anthropogenic activities on physico-chemical parameters of water and mineral uptake in Catla catla from river Ravi, Pakistan

The river Ravi, while passing through Lahore, the second largest city of Pakistan, gets highly polluted owning heavy loads of untreated municipal sewage and industrial effluents of diverse kinds. The fish, Catla catla sampled in two different seasons from three downstream polluted sites were compared with the samples of the same fish from an upstream, a less polluted site, for their physico-chemical parameters. The data were statistically analysed to study the effect of sites, seasons and their interaction on the physico-chemical parameters of waters and mineral uptake in fish muscles. Significant differences (P?<?0.001) among the sampling sites and seasons were observed. The river appeared to be polluted as indicated by the high values of total suspended solids (909 mg/l) and sulphate (964 mg/l) in comparison to the respective values of 150 and 600 mg/l being suggested as the safer values of drinking water of the National Environmental Quality Standards. Most trace and macro elements in fish muscles were increased with the increasing pollution loads from the upstream to the downstream sites of this river. The remarkable increases in the levels of all the investigated minerals in fish muscles from the polluted sites raise concerns about the long-term health of the river Ravi ecosystem and consequently the fish and its consumer’s health. The results contradict the opinion of the local population that the riverine fish are natural, more health-promoting and precious than the pond fish. Therefore, we strongly argue for the utilization of an effect-based monitoring approach to alleviate the detrimental effects of anthropogenic activities on fish and the fish consumers’ health.