Potential for rainwater use in high-rise buildings in Australian cities

Rainwater is a traditional but underutilized water resource that has today had a resurgence due to the worldwide water crisis. This paper demonstrates the outcomes of research on the feasibility of rainwater use in high-rise residential envelopes for four Australian cities of Melbourne, Sydney, Perth and Darwin. Different climate patterns and various levels of water demand management were established for determination of storage dimensions; annual tank water use; reduction in both imported water flow and stormwater disposal; and water spillage from tanks. High level water demand management was a profoundly effective tool for reducing potable water supply, especially in combination with rainwater use. The economic feasibility of rainwater use systems were estimated; with Sydney having the shortest payback period compared to other cities either both with 3A rated appliances (8.6 years) or 5A ones installed (10.4 years). That was due to the higher and more consistent rainfall in Sydney. An outcome of this study was that Sydney was likely most suited to rainwater use, followed by Perth, Darwin, and then Melbourne. The objective of this study was to fill in the gap in estimating feasibility of rainwater use in various Australian cities. This investigation endeavors to provide assistance to water authorities and urban planners of Australian cities with the consideration of the potential of rainwater harvesting.     

Metallic and organic contaminants in sediments of Sydney Harbour, Australia and vicinity-- a chemical dataset for evaluating sediment quality guidelines

An internally consistent dataset comprising 103 surficial estuarine sediment samples were collected from Sydney Harbour, Australia and locations south of Sydney. This paper describes the chemical characteristics of the dataset and evaluates its suitability for use in evaluating biological effects-based sediment quality guidelines (SQGs). The sediments contained mixtures of chemicals, the most prevalent chemical classes being metals and polycyclic aromatic hydrocarbons, whereas sediments from coastal lakes/estuaries south of Sydney had low concentrations of contaminants. Maximum concentrations of the prevalent contaminants zinc, lead, copper and pyrene were 11,300, 1,420, 1,060 mg kg(-1) and 23,300 microg kg(-1), respectively. For the majority of samples, concentrations of individual chemicals exceeded most effects-based SQGs that have been adopted for use in Australia, implying occasional or frequent adverse biological effects are expected. Comparing mixtures of contaminants to ranges in numbers of SQGs exceeded and mean SQG quotients showed that most samples (57% to 68%) had contamination characteristics associated with moderate probabilities (30% to 52%) of acute toxicity, based on North American data. A smaller proportion of samples (15% to 17%) had contamination characteristics associated with high probabilities (74% to 85%) of toxicity. The wide range of chemicals and concentrations, associated with low, medium and high probabilities of toxicity, indicated that the dataset was suitable for future use in evaluating predictive abilities of SQGs. This is relevant, given the recent introduction of North American-derived SQGs for Australia.     

Differences in sensitivity to the fungal pathogen Batrachochytrium dendrobatidis among amphibian populations

Contributing to the worldwide biodiversity crisis are emerging infectious diseases, which can lead to extirpations and extinctions of hosts. For example, the infectious fungal pathogen Batrachochytrium dendrobatidis (Bd) is associated with worldwide amphibian population declines and extinctions. Sensitivity to Bd varies with species, season, and life stage. However, there is little information on whether sensitivity to Bd differs among populations, which is essential for understanding Bd‐infection dynamics and for formulating conservation strategies. We experimentally investigated intraspecific differences in host sensitivity to Bd across 10 populations of wood frogs (Lithobates sylvaticus) raised from eggs to metamorphosis. We exposed the post‐metamorphic wood frogs to Bd and monitored survival for 30 days under controlled laboratory conditions. Populations differed in overall survival and mortality rate. Infection load also differed among populations but was not correlated with population differences in risk of mortality. Such population‐level variation in sensitivity to Bd may result in reservoir populations that may be a source for the transmission of Bd to other sensitive populations or species. Alternatively, remnant populations that are less sensitive to Bd could serve as sources for recolonization after epidemic events.     

An experimental set up of a PAH vapour generator and its use to test an annular denuder

The aim of this work is to develop and test a dynamic gas generator for semi-volatile organic compounds (SVOC). A single compound, naphthalene, is used as a surrogate PAH to test the system. The dynamic generation of PAH is based on the permeation technique [Analyst 106 (1981) 817; Am. Ind. Hyg. Assoc. J. 38 (1977) 712]. Monitoring the temperature and measuring the mass of PAH present in the permeation chamber every 48 h gives a direct measurement of the sublimation rate of the PAH. Knowing the flow rate, gives an accurate value of the concentration of PAH from the generator. It was found stable over a period of time under constant operating conditions. This concentration is diluted down to between 0.3 and 30 ppbv by a controlled flow of pure air. The diluting airflow is a mixture of dry and wet air, making it possible to control the relative humidity of the flow from the generator as well as its concentration in PAH. We used this generator to calibrate an annular denuder tube, based on the study by Gundel et al. [Atmos. Environ. 29 (1995) 1719]. Although this technique has been shown to be artefact-free for sampling gaseous PAH [Polycyclic Aromatic Compounds 9 (1996) 67; Atmos. Environ. 28 (1994) 3083], its trapping efficiency still depends on environmental parameters (temperature, relative humidity and sampling duration). Accordingly, we used our generator to calibrate a single annular denuder under controlled conditions (T degrees C, HR%, CPAH, sampling duration). The trapping efficiency of the denuder was calculated by two independent methods. Firstly, by comparing the amount trapped on a denuder with the measured mass sublimated in the generator. Secondly, by putting two denuders in series and comparing the mass collected on the first and the second tube. These two methods gave similar results, within the 10% relative uncertainties of both methods. The first results obtained show that, in environmental conditions, the efficiency ranges between 90 and 100%.     

Detection of Cryptosporidium parvum oocysts in sediment and biosolids by immunomagnetic separation.

A method for the detection of Cryptosporidium parvum oocysts in sediment and wastewater biosolids has been developed using immunomagnetic separation kits that were designed for use with water. This method requires no pretreatment of the sediment or biosolids samples before the commercial kit application. Oocyst recovery efficiencies from sediment and biosolids using the modified Dynal (Lake Success, New York) and Crypto-Scan commercial methods (Immucell Corporation, Portland, Maine) ranged from 20 to 60%. While the sensitivity of the method is dependent on the amount of sediment processed and the equivalent volume examined under the microscope, it was able to detect 0.48 oocysts per gram dry weight sediment. Using this method, Cryptosporidium parvum oocysts were found at levels as high as 97 oocysts/g of primary biosolids and at levels up to 4 oocysts/g in polluted sediment.     

Training Conservation Biologists in Human Interaction Skills

Questionnaires were sent to 298 graduate programs in conservation biology and other areas of the biological and agricultural sciences and to 702 public and private organizations that employ, or might employ, conservation biologists. The focus of the questionnaires was on the need for training conservation biologists in human interaction skills (e.g., interpersonal communication, leadership, group decision making). Respondents were asked to indicate the current availability of such training at their institutions or organizations. Questionnaires were returned by 28.5% of the graduate programs and 21.1% of the conservation organizations. A majority of both groups of respondents indicated a high need for training in the following seven areas: written and oral communication; explaining science and values of biodiversity to the lay public; group decision making; interpersonal skills; group planning; leadership; and advocacy. Despite the high level of perceived training need, relatively few academic institutions and even fewer conservation organizations offer or require courses in human interaction skills (with the exceptions of written and oral communication and foreign languages). Sixty-four percent of the graduate faculty respondents and 78% of the employer organization respondents indicated that human interaction skills are equally important or more important to the work of conservation biologists than science knowledge and skill. We suggest that follow-up research should be conducted to delineate further the need for human interaction skills training and to assess the relationship between specific human interactions skills and conservation outcomes. We also recommend that a curriculum on human interaction should be designed and developed for conservation biologists, perhaps through a cooperative effort of interested faculty and employers facilitated by the Society for Conservation Biology and conservation organizations.