APCA Financial Statements for FY 1981–82

ABSTRACT

The objective of this study was to determine whether ultraviolet-light-emitting diodes (UV-LEDs) could serve as an efficient photon source for heterogeneous photocatalytic oxidation (PCO). An LED module consisting of 12 high-power UV-A (λ_max?=?365 nm) LEDs was designed to be interchangeable with a UV-A fluorescent black light blue (BLB) lamp for a bench scale annular reactor packed with silica-titania composite (STC) pellets. Lighting and thermal properties of the module were characterized to assess its uniformity and total irradiance. A forward current (I _F) of 100 mA delivered an average irradiance of 4.0 mW cm^?2 at a distance of 8 mm, which is equivalent to the maximum output of the BLB, but the irradiance of the LED module was less uniform than that of the BLB. The LED and BLB reactors were tested for the oxidization of ethanol (50 ppm_v) in a continuous-flow-through mode with 0.94 sec residence time. At the same average irradiance, the UV-A LED reactor resulted in a lower CO₂ production rate (19.8 vs. 28.6 nmol L^?1 s^?1), lower ethanol removal (80% vs. 91%), and lower mineralization efficiency (28% vs. 44%) than the UV-A BLB reactor. Ethanol mineralization was enhanced with the increase of the irradiance at the catalyst surface. This result suggests that reduced ethanol mineralization in the LED reactor relative to the BLB reactor at the same average irradiance could be attributed to the nonuniform irradiance over the photocatalyst, that is, a portion of the catalyst was exposed to less than the average irradiance. The potential of UV-A LEDs may be fully realized by optimizing the light distribution over the catalyst and utilizing their instantaneous “on” and “off” feature for periodic irradiation. Nevertheless, our results also showed that the current UV-A LED module had the same wall plug efficiency (WPE) of 13% as that of the UV-A BLB, demonstrating that UV-A LEDs are a viable photon source both in terms of WPE and PCO efficiency.

IMPLICATIONS Mercury (Hg)-vapor lamps are common UV sources for photocatalysis but create safety and environmental concerns because they contain Hg; furthermore, they have a relatively short life span. This paper demonstrated that the UV-A LED is a viable alternative to the Hg-vapor lamps without sacrificing PCO efficiency if the design of the LED arrays is improved to increase the lighting uniformity. The use of LEDs could eliminate hazardous Hg wastes and extend the application of photocatalysis in places requiring more compact and robust air purification solutions.     

Attainment Flip-Flops and the Achievability of the Ozone Air Quality Standard

Abstract

This paper presents the results of the first reported study on fine particulate matter (PM) chemical composition at Salamanca, a highly industrialized urban area of Central Mexico. Samples were collected at six sites within the urban area during February and March 2003. Several trace elements, organic carbon (OC), elemental carbon (EC), and six ions were analyzed to characterize aerosols. Average concentrations of PM with aerodynamic diameter of less than 10 μm (PM₁₀) and fine PM with aerodynamic diameter of less than 2.5 μm (PM_2.5) ranged from 32.2 to 76.6 μg m^-3 and 11.1 to 23.7 μg m^-3, respectively. OC (34%), SO₄ ⁼ (25.1%), EC (12.9%), and geological material (12.5%) were the major components of PM_2.5. For PM₁₀, geological material (57.9%), OC (17.3%), and SO₄ ⁼ (9.7%) were the major components. Coarse fraction (PM₁₀ –PM_2.5), geological material (81.7%), and OC (8.6%) were the dominant species, which amounted to 90.4%. Correlation analysis showed that sulfate in PM_2.5 was present as ammonium sulfate. Sulfate showed a significant spatial variation with higher concentrations to the north resulting from predominantly southwesterly winds above the surface layer and by major SO₂ sources that include a power plant and refinery. At the urban site of Cruz Roja it was observed that PM_2.5 mass concentrations were similar to the submicron fraction concentrations. Furthermore, the correlation between EC in PM_2.5 and EC measured from an aethalometer was r² = 0.710. Temporal variations of SO₂ and nitrogen oxide were observed during a day when the maximum concentration of PM_2.5 was measured, which was associated with emissions from the nearby refinery and power plant. From cascade impactor measurements, the three measured modes of airborne particles corresponded with diameters of 0.32, 1.8, and 5.6 μm.     

Decabromodiphenylether and hexabromocyclododecane in wild birds from the United Kingdom, Sweden and The Netherlands: Screening and time trends

The brominated flame retardant decabromodiphenylether (DBDE) was analysed in wild birds to identify the most suitable species for monitoring time trends in DBDE contamination. This information was later used for the design of a 10-year trend study on DBDE in the European Union. DBDE was measured in muscle tissue, liver, and eggs from 10 terrestrial and four aquatic bird species. DBDE was detected in 47% of the terrestrial bird samples (nine species) and in 9% of the aquatic bird samples (six species). Peregrine falcon and sparrowhawk specimens were selected as most suitable species to determine temporal trends of DBDE. For sparrowhawks, no significant change in DBDE concentrations between 1973 and 2001 was found, although in later years more DBDE concentrations were above the detection limit. Peak DBDE levels measured in peregrines in 1995, were followed by a decline in concentrations until 2001. The same species were used for a trend study on hexabromocylcododecane (HBCD). Twenty-four percent of peregrine falcon eggs and 12% of sparrowhawk muscle samples demonstrated measurable HBCD residues. Three diastereomers of HBCD were analysed and the α-diastereomer was the predominant one in most samples. No clear time trends were observed for HBCD in either species. This study demonstrated that these DBDE and HBCD are bioavailable to birds of Northern Europe, although bioaccumulation seems to occur to a limited extent.     

Greening China Naturally

China leads the world in afforestation, and is one of the few countries whose forested area is increasing. However, this massive "greening" effort has been less effective than expected; afforestation has sometimes produced unintended environmental, ecological, and socioeconomic consequences, and has failed to achieve the desired ecological benefits. Where afforestation has succeeded, the approach was tailored to local environmental conditions. Using the right plant species or species composition for the site and considering alternatives such as grassland restoration have been important success factors. To expand this success, government policy should shift from a forest-based approach to a results-based approach. In addition, long-term monitoring must be implemented to provide the data needed to develop a cost-effective, scientifically informed restoration policy.     

Mapping opportunities and challenges for rewilding in Europe

Farmland abandonment takes place across the world due to socio‐economic and ecological drivers. In Europe agricultural and environmental policies aim to prevent abandonment and halt ecological succession. Ecological rewilding has been recently proposed as an alternative strategy. We developed a framework to assess opportunities for rewilding across different dimensions of wilderness in Europe. We mapped artificial light, human accessibility based on transport infrastructure, proportion of harvested primary productivity (i.e., ecosystem productivity appropriated by humans through agriculture or forestry), and deviation from potential natural vegetation in areas projected to be abandoned by 2040. At the continental level, the levels of artificial light were low and the deviation from potential natural vegetation was high in areas of abandonment. The relative importance of wilderness metrics differed regionally and was strongly connected to local environmental and socio‐economic contexts. Large areas of projected abandonment were often located in or around Natura 2000 sites. Based on these results, we argue that management should be tailored to restore the aspects of wilderness that are lacking in each region. There are many remaining challenges regarding biodiversity in Europe, but megafauna species are already recovering. To further potentiate large‐scale rewilding, Natura 2000 management would need to incorporate rewilding approaches. Our framework can be applied to assessing rewilding opportunities and challenges in other world regions, and our results could guide redirection of subsidies to manage social‐ecological systems.     

Headspace and small-chamber studies of airborne diacetyl release from selected food flavoring mixtures: activity coefficients and air modeling implications

Laboratory studies were conducted to evaluate airborne release of diacetyl from selected mixtures simulating butter flavorings added to foods. The test materials included diacetyl (97% purity); 0.015%, 0.15%, 1.5%, and 3.0% diacetyl in a water/propylene glycol mixture; 1.5% diacetyl in deionized water or soybean oil; and 3% or 6% diacetyl in a commercial steam distillate from milk fermentation known as “butter starter distillate.” Diacetyl was quantified by gas chromatography with flame ionization detection. Expected concentration-dependent emission patterns based on liquid diacetyl content were demonstrated, but were significantly altered by mixture composition. Soybean oil and deionized water more readily released diacetyl when compared with starter distillate, propylene glycol solutions, and pure diacetyl. Measured diacetyl concentrations under static headspace and dynamic flow-chamber conditions were compared to estimated concentrations utilizing Raoult's law with published and fitted activity coefficient corrections for each mixture, indicating that published coefficients often understated the measured concentrations. It is concluded that headspace (static) and small-chamber (dynamic) measurements of airborne diacetyl provide data to assist in validating model-estimated airborne diacetyl concentrations by using mixture-specific activity coefficients. Implications of these empirical data for validating exposure estimates for diacetyl based on near-field/far-field modeling in workplace settings are discussed.