An Analysis of Michigan and California CO Remote Sensing Measurements

Abstract

Remote sensing measurements of CO emissions from on-road vehicles were made in California in 1991 and in Michigan in 1992. It was determined that both fleets had a small linear increase in the high emitter frequency (vehicles emitting more than 4% CO) as a function of vehicle age for 1986 and newer model vehicles. Although high emitting vehicles were only a small minority of the fleet, they had a dominant impact on the mean CO and total CO emitted by the fleet. In Michigan, the highest emitting 5% of passenger cars generated 45% of the CO from cars. In California, the highest emitting 5% of passenger cars generated 38% of the CO from cars. There was a high correlation between the mean CO emitted by each model year of vehicle and the frequency of high emitting vehicles within the model year for both the Michigan and California fleets. The frequency of high emitters within any model year had no obvious relation to that model year’s certification standards. The high emitter frequencies for vehicles less than nine years old were very similar for the California and Michigan fleets. An increase in the high emitter frequency in the ten-year-old and older Michigan passenger car fleet (relative to the California passenger car fleet), suggests, but does not conclusively demonstrate, that the rate of high emitters in Michigan and California is reduced by the inspection and maintenance (I/M) programs.     

Interpretation of Trends of PM25 and Reconstructed Visibility from the IMPROVE Network

ABSTRACT

Under the IMPROVE visibility monitoring network, federal land managers have monitored visibility and fine particle concentrations at 29 Class I area sites (mostly national parks and wilderness areas) and Washington, DC since 1988. This paper evaluates trends in reconstructed visibility and fine particles for the 10th (best visibility days), 50th (average visibility days), and 90th (worst visibility days) percentiles over the nine-year period from 1988-96. Data from these sites provides an indication of regional trends in air quality and visibility resulting from implementation of various emission reduction strategies.     

Comparisons of the Dust/Smoke Particulate that Settled Inside the Surrounding Buildings and Outside on the Streets of Southern New York City after the Collapse of the World Trade Center,September 11, 2001

Abstract

The collapse of the World Trade Center (WTC) on September 11, 2001, generated large amounts of dust and smoke that settled in the surrounding indoor and outdoor environments in southern Manhattan. Sixteen dust samples were collected from undisturbed locations inside two uncleaned buildings that were adjacent to Ground Zero. These samples were analyzed for morphology, metals, and organic compounds, and the results were compared with the previously reported outdoor WTC dust/smoke results. We also analyzed seven additional dust samples provided by residents in the local neighborhoods. The morphologic analyses showed that the indoor WTC dust/smoke samples were similar to the outdoor WTC dust/smoke samples in composition and characteristics but with more than 50% mass in the <53 μm size fraction. This was in contrast to the outdoor samples that contained >50% of mass above >53 μm. Elemental analyses also showed the similarities, but at lower concentrations. Organic compounds present in the outdoor samples were also detected in the indoor samples. Conversely, the resident-provided convenience dust samples were different from either the WTC indoor or outdoor samples in composition and pH, indicating that they were not WTC-affected locations. In summary, the indoor dust/smoke was similar in concentration to the outdoor dust/smoke but had a greater percentage of mass <53 μm in diameter.     

Field Verification of Sound Attenuation Modeling and Air Emission Testing in Support of Missile Motor Disposal Activities

Abstract

The U.S. Department of Defense-approved activities conducted at the Utah Test and Training Range (UTTR) include both operational readiness test firing of intercontinental ballistic missile (ICBM) motors, as well as the destruction of obsolete or otherwise unusable ICBM motors through open burn/open detonation (OB/OD). Within the Utah Division of Air Quality, these activities have been identified as having the potential to generate unacceptable noise levels, as well as significant amounts of volatile organic compounds (VOCs). Hill Air Force Base, UT, has completed a series of field tests at the UTTR in which sound-monitoring surveillance of OB/OD activities was conducted to validate the Sound Intensity Prediction System (SIPS) model. Using results generated by the SIPS model to support the decision to detonate, the UTTR successfully disposed of missile motors having an aggregate net explosive weight (NEW) of 81,374 lb without generating adverse noise levels within populated areas. In conjunction with collecting noise-monitoring data, air emissions were collected to support the development of air emission factors for both static missile motor firings and OB/OD activities. Through the installation of 15 ground-based air samplers, the generation of combustion-fixed gases, VOCs, and chlorides was monitored during the 81,374-lb NEW detonation event. Comparison of field measurements to predictions generated from the US Navy energetic combustion pollutant formation model, POLU4WN, indicated that, as the detonation fire ball expanded, organic compounds, as well as CO, continued to oxidize as the combustion gases mixed with ambient air. VOC analysis of air samplers confirmed the presence of chloromethane, vinyl chloride, benzene, toluene, and 2-methyl-1-propene. Qualitative chloride analysis indicated that gaseous HCl was generated at low concentrations, if at all.     

Field Validation of Sound Mitigation Models and Air Pollutant Emission Testing in Support of Missile Motor Disposal Activities

Abstract

The U.S. Department of Defense approved activities conducted at the Utah Test and Training Range (UTTR) include both operational readiness test firing of intercontinental ballistic missile motors as well as the destruction of obsolete or otherwise unusable intercontinental ballistic missile motors through open burn/open detonation (OB/ OD). Within the Utah Division of Air Quality, these activities have been identified as having the potential to generate unacceptable noise levels, as well as significant amounts of hazardous air pollutants. Hill Air Force Base, UT, has completed a series of field tests at the UTTR in which sound-monitoring surveillance of OB/OD activities was conducted to validate the Sound Intensity Prediction System (SIPS) model. Using results generated by the SIPS model to support the decision to detonate, the UTTR successfully disposed of missile motors having an aggregate net explosive weight (NEW) of 56,500 lbs without generating adverse noise levels within populated areas. These results suggest that, under appropriate conditions, missile motors of even larger NEW may be detonated without exceeding regulatory noise limits. In conjunction with collecting noise monitoring data, air quality data was collected to support the development of air emission factors for both static missile motor firings and OB/OD activities. Through the installation of 15 ground-based air samplers, the generation of combustion fixed gases, hazardous air pollutants, and chlorides were monitored during the 56,500-lb NEW detonation event. Comparison of field measurements to predictions generated from the U.S. Navy’s energetic combustion pollutant formation model, POLU4WN, indicated that, as the detonation fireball expanded from ground zero, organic compounds as well as carbon monoxide continued to oxidize as the hot gases reacted with ambient air. Hazardous air pollutant analysis of air samplers confirmed the presence of chloromethane, benzene, toluene, 1,2-propadiene, and 2-methyl-1-propene, whereas the absence of hydrogen chloride gas suggested that free chlorine is not generated during the combustion process.     

Potential exposure of children and adults to cypermethrin following use of indoor insecticide foggers

The magnitude and distribution of cypermethrin from total release, over-the-counter foggers was studied in a test room and in residences to facilitate evaluation of regulatory exposure algorithms and new human exposure assessments based upon urine biomonitoring. Surface residue (SR) was evenly distributed in a small test room (3.6 μ g cypermethrin/cm²) where thorough mixing of the aerosol occurred. In a residence SR was significantly affected by room size and distance from the fogger. Air levels in the residence were as high as 30 μ g cypermethrin/cm³ after 4.5 h. The availability of surface residues was measured with an automated surface cotton cloth wipe and ethyl acetate extraction. Only 5% of the SR was available from nylon carpet. Tile, wood and linoleum resulted in 30, 10, and 10% of SR being available, respectively. These data are used to estimate cypermethrin exposure of children and adults for comparison with existing regulatory reference dosages and exposure assessments based upon biomonitoring.     

Field Dynamic Calibration of SO2 Recording Instruments

Recent air pollution legislation, introduced as a Clean Air Act into New South Wales, the most populous and most heavily industrialized Australian State relies mainly upon the establishment of maximum limits of emission of air impurities. Regulations made under the Act set out the first of a series of such limits which cover the more commonly encountered pollutants. Other limits will be included later as knowledge is accumulated but, in the meantime, where standards have not been fixed the "best practicable means" of controlling air pollution must be used. To facilitate administration and to provide financial support for scientific and engineering services in the form of the Air Pollution Control Board, industries of significant air pollution potential have been designated as scheduled premises and pay annual license fees. Further technical support for the legislation is provided by an Air Pollution Advisory Committee.     

Concurrent and Complete Anaerobic Reduction and Microaerophilic Degradation of Mono‐, Di‐, and Trichlorobenzenes

Bio‐Trap^®–based in situ microcosm studies were conducted to evaluate EHC‐M^® stimulated degradation of mono‐, di‐, and trichlorobenzenes in anaerobic groundwater at a site in Michigan. The data show that the EHC‐M^® amendment stimulated an overall increase in microbial activity and a shift in the microbial community structure, indicating more reduced conditions. Stable isotope probing with ¹³C₆‐chlorobenzene demonstrated attenuation of chlorobenzene and subsequent separation and characterization of the ¹²C‐ and ¹³C‐deoxyribonucleic acid (DNA) fractions were used to identify the attenuating microbes. These data clearly show the participation of an obligate aerobe in the chlorobenzene biodegradation process. Decreases in concentrations of trichlorobenzenes were also observed in comparison to a control. Due to the thermodynamically favorable reducing conditions stimulated by EHC‐M^®, the mechanism of degradation of the trichlorobenzenes is presumed to be reductive dehalogenation. However, on the strength of the DNA‐based analysis of microbial community structure, concurrent microaerophilic degradation of chlorobenzene or its metabolites was definitively demonstrated and cannot be ruled out for the other chlorobenzenes. © 2013 Wiley Periodicals, Inc.     

Simulating the Impact of Cover Degradation on RCRA Landfill Performance

The ability of near‐surface disposal facility cover designs to meet percolation performance criteria is influenced by degradation occurring over long periods of time. This study was conducted to determine the effect of degradation on percolation based on probabilistic distributions derived from historical climate data. Water‐balance predictions were evaluated using the HELP model, employing several variations of degradation in a traditional Resource Conservation and Recovery Act disposal facility cover design over a 100‐year simulation period. Analysis results were evaluated relative to two different selected thresholds for annual percolation (1 mm and 3 mm). Approximately 20 percent of the results did not exceed both the 1‐mm and 3‐mm thresholds, while 10 percent of the realizations exceeded the 1‐mm threshold but not the 3‐mm threshold, with remaining cases exceeding the 3‐mm threshold. These results demonstrate the importance of considering degradation in designing near‐surface disposal facilities, especially given the very long performance periods desired by different regulators. © 2013 Wiley Periodicals, Inc.