氨氮废水处理技术研究进展

氨氮废水是造成水体富营养化的主要因素之一 ,本文综述了氨氮废水的几种主要处理技术 ,介绍了它们的处理原理以及适用条件 ,指出了今后研究工作中需要解决的问题和氨氮废水处理技术今后的发展方向     

石灰湿法脱硫过程中pH条件对结垢的影响研究

针对石灰湿法脱硫中存在的结垢问题，在鼓泡床中模拟了石灰湿法脱硫过程，通过分析液相的组成，结合反应机理探讨了pH对结垢的影响。结果表明，当pH控制在6.0～4．0时，既能避免结垢，又能获得较高的脱硫率。提出了实际中预测结垢倾向的方法。     

等离子体发生区工作时发射特定光谱的研究

介绍了2种不同等离子体发生区和不同测量距离对等离子体发生区沿面蓝光中紫外光的波长和相对光强的影响,所测的臭氧发生量大的等离子体发生区的紫外光的相对光强高,测量距离与相对光强呈指数关系,并且等离子体发生区沿面蓝光具有光催化作用.     

污染土壤修复效果评定方法的研究

在实施污染土壤修复的环境工程后,需要通过灵敏和有效的评定方法对污染土壤修复的效果进行评定.然而,单纯依靠化学方法进行污染土壤修复效果的评定,不能揭示土壤的整体质量特征,因此需要生态毒理方法作为相互补充的手段.本文概述了植物毒性评定法、陆生无脊椎动物评定法和土壤微生物评定法及其在污染土壤修复效果评定中的应用,并对污染土壤修复效果评定方法的发展前景进行展望.     

活性炭纤维吸附废水中对硝基苯酚及其脱附研究

采用新型高效吸附剂——活性炭纤维吸附废水中对硝基苯酚，对其吸附和脱附影响因素进行了较详细的研究，确定了最佳工艺参数，并对动态吸附一脱附进行了稳定性实验。在最佳的吸附条件下，装填4g活性炭纤维可处理含对硝基苯酚1000mg/L的废水1400mL，出水对硝基苯酚浓度〈2mg／L，达到国家综合污水一级排放标准，活性炭纤维有效吸附量可达349．87mg／g。在最佳脱附条件下，脱附率〉99％，并可从高浓度脱附液中回收对硝基苯酚。稳定性实验表明，吸附-脱附性能稳定，采用活性炭纤维吸附处理对硝基苯酚废水是一种行之有效的处理方法。     

新型高效污水处理设备--集成一体化生物转筒反应器

介绍了一种新型高效污水处理设备--集成一体化生物转筒反应器(IBDR).IBDR具有微生物浓度高、活性强、生物相分级明显、耐冲击负荷、污泥沉降性能好和不产生污泥膨胀、操作简单灵活、运行成本低等显著特点;并成功地运用于处理餐饮污水和深圳某厂洗涤剂生产废水.在处理餐饮污水时,IBDR比传统的生物转盘处理效果高出20%.     

纳米级铁粉脱氯降解四氯化碳

四氯化碳的生产和使用，给人类带来了较大危害。为此，采用纳米铁粉这一新方法对其进行脱氯处理。试验以纳米级铁粉对四氯化碳的脱氯率为考察指标，选用L25（5^6）正交试验方案，考察了降解介质的初始pH值、纳米铁粉的质量、降解温度、摇床转速和脱氯时间5个影响因素。结果表明，pH值这一因素有极显著影响；在得出的纳米铁粉对四氯化碳脱氯的最佳工艺条件下，获得了99．5％的脱氯率，为有机氯化物脱氯开辟了一条新途径。     

Modulation of hepatic and intestinal glutathione S-transferases and other antioxidant enzymes by dietary lipids in streptozotocin diabetic rats

Antioxidant enzymes in liver and small intestine were investigated using control and streptozotocin diabetic rats fed diets with 5% olive, sunflower or fish oil for five weeks. In liver, Glutathione Peroxidase and Superoxide Dismutase decreased and in intestine Glutathione-S-transferase (GST) increased by diabetes. In isolated jejunum and ileum, this increase in GST activity was due to an increase in GST-alpha and -mu isoenzymes in jejunum and GST-alpha, mu and -pi in ileum. Since GST plays an important role in protecting tissues from oxidative damage, our results highlight the role of the intestine against free radicals in physiological or pathological situations.     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

A green method to synthesize flowerlike Fe(OH)3 microspheres for enhanced adsorption performance toward organic and heavy metal pollutants

Dyestuffs and heavy metal ions in water are seriously harmful to the ecological environment and human health.Three-dimensional(3 D) flowerlike Fe(OH)_3 microspheres were synthesized through a green yet low-cost injection method,for the removal of organic dyes and heavy metal ions.The Fe(OH)_3 microspheres were characterized by thermal gravimetric analysis(TGA),Fourier transform infrared(FT-IR),and transmission electron microscopy(TEM) techniques.The adsorption kinetics of Congo Red(CR) on Fe(OH)_3 microspheres obeyed the pseudo-second-order model.Cr~(6+) and Pb~(2+) adsorption behaviors on Fe(OH)_3 microspheres followed the Langmuir isotherm model.The maximum adsorption capacities of the synthesized Fe(OH)_3 were 308,52.94,and 75.64 mg/g for CR,Cr~(6+),and Pb~(2+) respectively.The enhanced adsorption performance originated from its surface properties and large specific surface area of 250 m~2/g.The microspheres also have excellent adsorption stability and recyclability.Another merit of the Fe(OH)_3 material is that it also acts as a Fenton-like catalyst.These twin functionalities(both as adsorbent and Fenton-like catalyst) give the synthesized Fe(OH)_3 microspheres great potential in the field of water treatment.