天津地区大气污染状况和气溶胶硫酸盐的研究

我们于1980—1981年对天津市大气污染物浓度做了同步监测,对天津市大气污染状况,二氧化硫转化为硫酸盐的过程及其对大气能见度的影响做了研究。以超C_i几率和的方法处理数据,研究结果表明,大气污染以早晨最严重,傍晚次之,中午较轻:冬季比夏季污染严重。各种污染物中以硫酸盐对大气能见度的影响最大,总颗粒物次之。当大气相对湿度大于70%时,对大气能见度的影响比较突出。颗粒物中的苯溶物对大气能见度有一定的影响。城市中相对湿度高时硫酸盐浓度大,可能是产生冬季烟雾事件的原因。下风方向的硫酸根浓度与二氧化硫浓度的比值和硫酸根含硫浓度与大气总硫浓度的比值均比上风方向相应的数值高,说明城市燃煤烟气是硫酸盐的来源。城市中硫酸根浓度与二氧化硫浓度的相关系数为0.77,硫酸根与颗粒物浓度的相关系数为0.95。在形成硫酸根的过程中二氧化硫浓度和颗粒物可能有贡献。以一维有源简化模式估算二氧化硫转化为硫酸根的速率常数,约为2.3±1.1%/hr,冬季约1.5%/hr。二氧化硫的迁移距离约为17—340km。     

混凝法处理锰矿选矿废水的试验研究

选取聚合氯化铝（PAC）、聚合硫酸铁（PFS）、聚丙烯酰胺（PAM）和六水合氯化铁（FC）4种常用混凝剂,采用正交试验,以去浊率与去锰率作为综合评价指标,探讨了不同混凝剂处理锰矿选矿废水的效果及最佳混凝条件。结果表明：在以上混凝剂中,FC的混凝效果较差;PAM对锰矿选矿废水的处理效果最优,最佳的混凝条件为：处理500 ml的废水,投加1.5 ml的PAM,pH为7.0,搅拌后沉降20 min,废水经处理后去浊率与去锰率分别为96%、92%,其中废水的pH及投药量对混凝效果的影响较大。     

堆放垃圾渗滤液水溶性有机物的荧光特性

为揭示堆放垃圾渗滤液物质组成特性及其变化规律,采用三维荧光光谱,对4个不同垃圾堆场渗滤液水溶性有机物(DOM)进行了研究.结果显示,堆放垃圾渗滤液样品S1中含有2类蛋白荧光峰:类酪氨酸荧光峰和类色氨酸荧光峰,其他3个样品(S2、S3及S4)只含有类色氨酸荧光峰,此外还出现了类腐殖质荧光峰,且不同样品中该峰的数目、类型及位置均存在差异,显示渗滤液样品S1只含有类蛋白类物质,而其他3个样品除此之外还含有类腐殖质物质,且腐殖化程度各异.类蛋白类物质-Hg(II)配位研究显示,与类色氨酸荧光峰相比,类酪氨酸荧光峰更易受介质微环境改变影响;室温培养模拟研究显示,与类腐殖质物质相比,类蛋白类物质更易发生降解.三维荧光光谱可以有效表征堆场渗滤液DOM物质组成及其变化规律.     

电沉积法处理电解锌漂洗废水的动力学研究

采用电沉积法处理电解锌漂洗工艺废水,以回收废水中的重金属资源。在不同实验条件下对电沉积反应过程中电沉积反应速率及其影响因素进行了研究,结果表明,电沉积回收重金属锌符合准一级动力学规律,当V=6 V时,速率常数k=0.0214。最佳实验条件为:槽电压V=6 V、电解时间为45~60 min、pH为2.5~3.5,反应过程中应充分搅拌。利用电沉积法处理电解锌漂洗废水,将重金属Zn2+还原为单质锌,处理废水的同时实现重金属资源的回收,在工业中有较好的应用前景。     

阳澄湖浮游植物研究及其富营养化评价

通过对阳澄湖水体2002年-2007年间浮游植物的调查研究,结合富营养化理化指标进行分析,结果表明：该水域共发现浮游植物8门92属283种（包括变种）,其中以硅藻门的种类占优势;浮游植物的种类和数量随年度和水域不同而呈现差异;浮游植物对阳澄湖富营养化具有较好的指示作用,水体为轻度富营养化水体,近年来有加重的趋势。本研究为建立阳澄湖长期生态研究数据信息库及长江中下游淀泖地区浅水型湖泊的生态环境保护政策制定提供科学依据。     

An online monitoring system for atmospheric nitrous acid (HONO) based on stripping coil and ion chromatography

A new instrument for measuring atmospheric nitrous acid(HONO) was developed,consisting of a double-wall glass stripping coil sampler coupled with ion chromatography(SC-IC).SC-IC is featured by small size(50 × 35 × 25 cm) and modular construction,including three independent parts:the sampling unit,the transfer and supporting unit,and the detection unit.High collection efficiency(> 99%) was achieved with 25 μmol/L Na2CO3 as absorption solution even in the presence of highly acidic compounds.This instrument has a detection limit of 8 pptv at 15 min time resolution,with a measurement uncertainty of 7%.Potential interferences from NOx,NO2+SO2,NO2+VOCs,HONO+O3,HNO3,peroxyacetyl nitrite(PAN) and particle nitrite were quantified in laboratory studies and were found to be insignificant under typical atmospheric conditions.Within the framework of the 3C-STAR project,inter-comparison between the SC-IC and LOPAP(long path liquid absorption photometer) was conducted at a rural site in the Pearl River Delta.Good agreement was achieved between the two instruments over three weeks.Both instruments determined a clear diurnal profile of ambient HONO concentrations from 0.1 to 2.5 ppbv.However,deviations were found for low ambient HONO concentrations(i.e.< 0.3 ppbv),which cannot be explained by previous investigated interference species.To accurately determine the HONO budget under illuminated conditions,more intercomparison of HONO measurement techniques is still needed in future studies,especially at low HONO concentrations.     

持久性有机污染物(POPs)及其生态毒性的研究现状与展望

持久性有机污染物(POPs)是一类具有持久性、易于生物富集、对人和生物具有毒性的有机污染物质。POPs已成为全球关注的热点问题，它们对人和生物具有免疫毒性、内分泌毒性、生殖发育影响、致癌性以及其它一些毒性效应。因此应加强POPs生态毒性的研究。     

铁碳微电解技术应用与研究

铁碳微电解作为一种"以废治废"的高效废水预处理技术受到人们的广泛关注,近几十年来广泛应用于废水处理工程实践中.为了进一步提高铁碳微电解技术的处理效果,很有必要对铁碳微电解技术的反应机理深入了解,对影响铁碳微电解处理效果的各种因素进行探讨,并剖析近年来铁碳微电解技术在废水预处理应用方面的研究成果,总结该技术存在的问题并探究相应的改进技术,最后对该技术未来研究方向和发展趋势进行了展望.     

pH过程控制对铁炭微电解-Fenton影响中试研究

采用铁炭微电解-Fenton联合工艺处理制药废水生化出水,探讨了初始pH对微电解过程COD降解速率、出水中Fe2+和Fe3+变化规律以及后续Fenton氧化效果的影响,为优化联合工艺提出了微电解反应pH过程控制的理论。采用pH过程控制时,微电解对COD降解速率大大提高,降解过程基本符合零级反应动力学,同时可大大提高Fe2+和Fe3+浓度及总铁析出量。试验结果表明:当初始pH=2.5,以3.0L/h连续性投加稀硫酸100 min,曝气微电解反应2 h,出水再投加1.0mL/L的H2O2进行Fenton氧化2 h,出水COD总去除率可达85.6%;采用pH过程控制可将微电解出水ρ(Fe2+)浓度从48.6 mg/L提高至149 mg/L,COD降解速率从10.9 mg/(L·h)提高至23.8 mg/(L·h)。     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.