Reutilisation-extended material flows and circular economy in China

Circular economy (CE), with its basic principle of Reduce, Reuse, and Recycle, has been determined as the key strategy for the national development plan by the Chinese government. Given the economy-wide material flow analysis (EW-MFA) that leaves the inner flow of resource reutilisation unidentified, the reutilisation-extended EW-MFA is first introduced to evaluate and analyse the material input, solid waste generation, and reutilisation simultaneously. The total amount of comprehensive reutilisation (CR) is divided into three sub-flows, namely, reutilisation, recycle, and reuse. Thus, this model is used to investigate the resource CR in China from 2000 to 2010. China’s total amount of CR and its sub-flows, as well as the CR rate, remain to have a general upward trend. By the year 2010, about 60% of the overall solid waste generation had already been reutilised, and more than 20% of the total resource requirement was reutilised resource. Moreover, the growth patterns of the CR sub flows show different characteristics.Interpretations of resource reutilisation-related laws and regulations of CE and the corresponding policy suggestions are proposed based on the results.     

Detailed Ecological Footprint Accounting of Liaoning in 2006

Ecological footprint （EF） has received considerable attention as a useful indicator in the context of sustainable development. So far, EF has been used in numerous studies by academies, organizations and government authorities. However, the results of these studies failed to be comparable directly with each other due to imprecise data sets, unmodified accounting methods of pasture and fossil energy, ignored secondary products, undefined process Of calculating yield factors and improper biocapacity for biodiversity. In this paper, we elaborated on EF estimating methods from six categories of consumption in order to overcome the limitations above. We adopted precise data and revised methods, calculated EF of some secondary products, introduced weighted factor to calculate yield factors and adjusted biocapacity by an appropriate amount. Meanwhile, we investigated the resource consumption of Liaoning Province in 2006 to assess EF. Its results showed that Liaoning Province overused its natural capital and was in an unsustainable state. We concluded that two specific problems that had arisen in EF assessment and gave some suggestions for Liaoning Province to improve its unsustainable state.     

基于模糊AHP模型的飞行评价体系

一种正确有效的飞行训练评估方法是保障飞行训练质量的必要前提和基础,而传统的评估方法多采用单一指标评价法或横向指标比较法,这种方法虽然简单易行,但没有充分考虑到评估体系自身的多样性,不能够真实反映飞行训练状态。本文提出了以模糊综合法为主体,专家评价、层次分析法相结合的综合评价方法,通过构造隶属度矩阵,建立飞行训练评估模型,克服了飞行教员评价的主观性,比较全面、客观的进行综合评估,量化计算过程,为真实、有效的飞行训练奠定基础。     

城市灾害风险等级评估流程的探讨及其实证研究

城市在社会发展的进程中起着主要作用,然而,城市灾害造成的严重后果已经对当今社会的发展构成了严重的阻碍,如何确定城市灾害总体风险等级并提出相应的对策措施亟需探讨。本文在分析城市常见四大类灾害(自然灾害、事故灾害、公共卫生灾害、社会安全灾害)的基础之上,进行城市灾害评估流程的介绍,包括灾害识别、灾害分析、灾害评价、提出对策措施,从而为城市灾害的总体等级的确定奠定初步的理论基础。以青岛市统计局相关资料为依据,对青岛市的城市灾害风险等级进行评估,确定其风险等级并提出相关建议措施。     

便携式金属测定仪在环境水质检测中的应用

使用METALYSER HM1000 Heavy Metals Analyser(简称HMA)便携式金属测定仪测定环境水质铜、铅、锌、镉,试验结果表明:HMA便携式金属测定仪检测限满足GB 3838—2002《地表水环境质量标准》除Ⅰ类地表水以外对检测限的要求,准确度和稳定性满足环境水质重金属检测工作的要求,加标回收率符合国标规定,可以在环境水质重金属检测及应急监测工作中推广使用。     

PWM变频驱动电机轴电压与轴电流的测试方法

PWM变频器的广泛应用大大改善了电机调速性能,但是,由于PWM变频器共模电压在电机内部耦合电容作用下,形成轴电压和轴电流,会引起轴承早期失效危及系统安全运行。轴电流问题的研究包括对轴电流的分析、预测和抑制。然而这些过程需要轴电压和轴电流的准确测量进行验证和比对分析。设计合理而有效的测量装置和测量方法是非常重要的一环。在分析轴电流产生机理的基础上,对现有的各种轴电流测量方法和轴承阻抗特性测试方法进行介绍,总结对比这几种方法的优缺点,为轴电流的测试平台的新设计提供参考。     

二氧化碳灭火系统扑灭风电机组舱内火灾试验研究

为有效遏制全国多地风力发电机组火灾事故的势头,基于灭火系统在风电机组防火设计中的重要性,提出采用二氧化碳灭火系统对风电机舱进行灭火保护的解决方案。在建造国内首台风电机组火灾模拟试验装置的基础上,通过试验研究二氧化碳灭火系统在常温状态和低温状态下对风电机组火灾的灭火能力。结果表明,该灭火系统能够对风力发电机组进行全淹没灭火保护,适用于空间狭小且结构复杂的风电机舱;在低温条件下,其喷放时间和灭火时间虽比常温状态下长,但灭火效能并未降低。