Population-level variation in plant secondary chemistry,and the population biology of herbivores

Summary Modern population ecology is becoming increasingly spatially-explicit. For insect hervibores, spatial variation in plant quality is a critical component of distribution and abundance. We argue that populationlevel measurements of phytochemical variation among individual plants has not kept pace with recent developments in population ecology. With examples from our own work, we demonstrate the importance of spatial variation in plant chemistry for insect herbivores, and suggest that phytochemistry should play a central role in the development of any spatially-based ecological theory.     

Using polymer solutions to enhance recovery of mobile coal tar and creosote DNAPLs

Direct pumping and enhanced recovery of coal tar and creosote dense, non-aqueous phase liquids (DNAPLs) from the subsurface have had mixed results because these DNAPLs are viscous fluids that can potentially alter aquifer wettability. To improve the inefficiencies associated with waterflooding, the research presented here considered the use of a polymer solution that can be added to the injected flood solution to increase the viscosity and decrease the velocity of the flooding solution. Results from one-dimensional, vertically oriented laboratory column experiments that evaluate the recovery of coal-derived DNAPL with both water and polymer flooding solutions are presented. The final DNAPL saturation remaining in the column was assessed in water and oil-wet systems for three viscous DNAPLs. Adding polymer to increase the aqueous solution viscosity did not have a significant impact in water-wet systems. A final DNAPL saturation of approximately 19% was achieved for both water and polymer floods. In contrast, the addition of polymer significantly improved recovery in oil-wet systems. The final saturation was over 40% in oil-wet systems after waterflooding, but approximately 19% with a polymer flushing solution. Although the final saturation produced with polymer flooding was similar between the oil- and water-wet systems, differences in the relative permeability and distribution of DNAPL in the porous matrix caused the DNAPL recovery to be much slower in the oil-wet system.     

TNT particle size distributions from detonated 155-mm howitzer rounds

To achieve sustainable range management and avoid or minimize environmental contamination, the Army needs to know the amount of explosives deposited on ranges from different munitions and how these are degraded and transported under different geological and climatic conditions. The physical form of the deposited explosives has a bearing on this problem, yet the shapes and size distributions of the explosive particles remaining after detonations are not known. We collected residues from 8 high-order and 6 low-order non-tactical detonations of TNT-filled 155-mm rounds. We found significant variation in the amount of TNT scattered from the high-order detonations, ranging from 0.00001 to 2% of the TNT in the original shell. All low-order detonations scattered percent-level amounts of TNT. We imaged thousands of TNT particles and determined the size, mass and surface-area distributions of particles collected from one high-order and one low-order detonation. For the high-order detonation, particles smaller than 1 mm contribute most of the mass and surface area of the TNT scattered. For the low-order detonation, most of the scattered TNT mass was in the form of un-heated, centimeter-sized pieces whereas most of the surface area was again from particles smaller than 1 mm. We also observed that the large pieces of TNT disintegrate readily, giving rise to many smaller particles that can quickly dissolve. We suggest picking up the large pieces of TNT before they disintegrate to become point sources of contamination.     

Odours from pulp mill effluent treatment ponds: the origin of significant levels of geosmin and 2-methylisoborneol (MIB)

Pulp and paper mills are well known for their sharp, sulphurous stack emissions, but the secondary treatment units also can be significant contributors to local odour. This study investigated the source(s) of earthy/musty emissions from a mixed hardwood pulp mill in response to a high local odour. Samples from five sites in the mill over five months were analyzed for earthy/musty volatile organic compounds (VOCs), examined microscopically, and plated for bacteria and moulds. In all cases, activated sludge showed substantial geosmin levels and to a lesser extent 2-methylisoborneol (MIB) at 2000-9000 times their odour threshold concentrations (OTCs). These VOCs were lower or absent upstream and downstream, suggesting that they were produced within the bioreactor. Geosmin and MIB were highest in late summer and declined over winter, and correlated with different operating parameters. Geosmin was most closely coupled with temperature and MIB with nitrogen uptake. Cyanobacteria were present in all sludge samples, but actinomycetes were not found. Gram-negative bacteria and one fungal species isolated from the bioreactor and secondary outfall tested negative for geosmin or MIB. We conclude: (i) geosmin and MIB contribute significantly to airborne odours from this mill, but are diluted below OTC levels at the river; (ii) these VOCs are generated by biota in the activated sludge; and (iii) cyanobacteria are likely primary source(s). The growth of cyanobacteria in activated sludge represents a loss of energy to the heterotrophic population; thus earthy/musty odours may represent a diagnostic for less than optimal conditions.     

Airborne observations of vegetation and implications for biogenic emission characterization

Measuring hydrocarbons from aircraft represents one way to infer biogenic emissions at the surface. The focus of this paper is to show that complementary remote sensing information can be provided by optical measurements of a vegetation index, which is readily measured with high temporal coverage using reflectance data. We examine the similarities between the vegetation index and in situ measurements of the chemicals isoprene, methacrolein, and alpha-pinene to estimate whether the temporal behavior of the in situ measurements of these chemicals could be better understood by the addition of the vegetation index. Data were compared for flights conducted around Houston in August and September 2000. The three independent sets of chemical measurements examined correspond reasonably well with the vegetation index curves for the majority of flight days. While low values of the vegetation index always correspond to low values of the in situ chemical measurements, high values of the index correspond to both high and low values of the chemical measurements. In this sense it represents an upper limit when compared with in situ data (assuming the calibration constant is adequately chosen). This result suggests that while the vegetation index cannot represent a purely predictive quantity for the in situ measurements, it represents a complementary measurement that can be useful in understanding comparisons of various in situ observations, particularly when these observations occur with relatively low temporal frequency. In situ isoprene measurements and the vegetation index were also compared to an isoprene emission inventory to provide additional insight on broad issues relating to the use of vegetation indices in emission database development.     

Contaminant levels in colonial waterbirds from Green Bay and Lake Michigan, 1975–80

Residues of organochlorine pesticides, polychlorinated biphenyls (PCBs), polybrominated biphenyls (PBBs), polychlorinated styrenes (PCSs), and mercury were measured in the eggs of 10 species of colonial waterbirds nesting in areas around Green Bay or Lake Michigan from 1975 to 1980. Residues also were measured in the carcasses and brains of black-crowned night-herons (Nycticorax nycticorax). The highest residues were of PCBs, DDE, mercury, and dieldrin; for some species, levels of these chemicals possibly were high enough to have caused reproductive effects. Other organochlorine pesticides were found at low levels. Only trace amounts of PCSs and PBBs were found. Eggs of herring gulls (Larus argentatus) collected in 1977 from an island in Lake Michigan contained an average of 100 ppm PCBs and 33 ppm DDE; this was the most-contaminated species. Cattle egrets (Bubulcus ibis), the only bird that is not a fish eater, contained only small quantities of DDE and mercury.     

Monitoring contaminant exposure: Relative concentrations of organochlorines in three tissues of American black ducks

Comparison of organochlorine residues in wildlife must often be made to regulatory standards or to values of known biological significance; this is difficult when dissimilar tissues are analyzed and results are expressed on different bases. To relate levels in the different tissues used for regulatory and monitoring purposes and for biological assessments, we exposed American black ducks to mixtures of three organochlorines. Differences in residue burdens among tissues were not statistically significant when levels were expressed on a lipid weight basis. Levels of heptachlor and Aroclor 1254 in one tissue can be accurately predicted from those in another; such predictions for endrin are less reliable. Lipid weight based residue concentrations in wings may be used to predict whether levels in fat exceed residue standards set for human health or approach those associated with effects on populations of species sampled.     

A laboratory investigation of the effectiveness of various skin and surface decontaminants for aliphatic polyisocyanates

Isocyanates may cause contact dermatitis and respiratory sensitization leading to asthma. Dermal exposure to aliphatic isocyanates in auto body shops is very common. However, little is known about the effectiveness of available commercial products used for decontaminating aliphatic polyisocyanates. This experimental study evaluated the decontamination effectiveness of aliphatic polyisocyanates for several skin and surface decontaminants available for use in the auto body industry. The efficiency of two major decontamination mechanisms, namely (i) consumption of free isocyanate groups via chemical reactions with active hydrogen components of the decontaminant and (ii) physical removal processes such as dissolution were studied separately for each decontaminant. Considerable differences were observed among surface decontaminants in their rate of isocyanate consumption, of which those containing free amine groups performed the best. Overall, Pine-Sol(R) MEA containing monoethanolamine was the most efficient surface decontaminant, operating primarily via chemical reaction with the isocyanate group. Polypropylene glycol (PPG) had the highest physical removal efficiency and the lowest reaction rate with isocyanates. All tested skin decontaminants performed similarly, accomplishing decontamination primarily via physical processes and removing 70-80% of isocyanates in one wiping. Limitations of these skin decontaminants are discussed and alternatives presented. In vitro testing using animal skins and in vivo testing with field workers are being conducted to further assess the efficiency and identify related determinants.     

Metals, Boron, and Selenium in Neosho Madtom Habitats in the Neosho River in Kansas, U.S.A.

In 1991 and 1992 we determined the levels of metals, arsenic, boron, and selenium in the Neosho River drainage in southeastern Kansas, the primary habitat for the threatened Neosho madtom (Noturus placidus). We evaluated concentrations in sediments, mussels (Quadrula pustulosa and Q. metanevra), and fish(Percina phoxocephala, Cyprinus carpio,and Ictiobus bubalus) from three sites on theNeosho River and one site on the Cottonwood River. We also evaluated contaminant concentrations in C. carpio composite samples collected by theKansas Department of Health and Environment (KDHE)at two additional locations on the Neosho River in1990–92. Sediments were contaminated by lead. Concentrations of selenium, boron, and most metalsin mussels were low to normal for biota. Arseniclevels in mussels and fish suggest low-levelcontamination of biota. Aluminum, barium, manganeseand strontium concentrations were much higher inmussels than in fish. Five fish composite sampleshad cadmium concentrations that indicate chronicdeleterious effects on biota. Lead concentrationsin six fish samples were elevated. Mercuryconcentrations in most large fish compositesexceeded concentration for protection of animalsthat might consume them. We believe that reductionsin cadmium, lead, and mercury contamination, inparticular, would benefit aquatic life in theriver.     

Evaluation of synchrotron X-ray computerized microtomography for the visualization of transport processes in low-porosity materials

Synchrotron-source X-ray computerized microtomography (CMT) is evaluated as a method to visualize transport processes. We conclude that CMT is adequate for visualization of transport experiments if the right conditions exist. Namely, 1) not much more than one-order-of-magnitude range in concentration data is needed for the study, 2) the pore space in the samples are greater than approximately 2--50 mum, depending on the sample size and system setup; 3) the sample is fine-grained enough so that a representative elemental volume (REV) can be contained by a 2--10 mm diameter sample, and 4) the transport process is slow enough that significant changes do not occur within the 25--50 min (and possibly less in the future) needed to collect data for one three-dimensional image. Absorption edge difference imaging (AEDI) in association with CMT is introduced as a method to enhance pore-space visualization. We successfully imaged the pore space in a low-porosity granodiorite, diorite and fine-grained granite cores and a higher-porosity soil aggregate sample. We found that the pore space important to transport in the core samples was smaller than what we were able to visualize with CMT. We also made rudimentary associations of minerals with pore-space location.