加压活性炭生物膜法处理DSD有机废水

采用加压活性炭生物膜法处理以对硝基甲苯磺酸盐为主的难降解的有机废水的研究,是在活性炭生物膜法处理有机废水基础上发展起来的新技术。本实验结果表明,在加压9.8×10~4Pa(1kgt/cm~2)的条件下,COD_(Cr)去除率为62％～70％,比常压活性炭生物膜法高20％～25％;其容积负荷Nv=1.7～2.9kgCOD/m~3·d,比一般活性污泥法高3～6倍。     

Petroleum waste biodegradation with porous biomass support system (PBSS) on rotating biological contactor

A laboratory scale study was conducted to assess the feasibility of the new coupling of rotating biological contactor (RBC) plus porous biomass support system (PBSS) using polyurethane foam as porous support media to biodegrade petroleum refinery wastewater. Polyurethane foam was attached on disks of two four-stage laboratory scale cascade connected RBC units.The two RBC units were operated simultaneously at different but constant, flowrates giving hydraulic loading rates of 0.01, 0.02, 0.03, 0.04 m3/m2/d in two runs keeping the same rotational speed 10 r/min throughout. Organic loading was a less controllable factor in this study.For all of the hydraulic loadings, it was found that the removal efficiency of total chemical oxygen demand (TCOD) and oil were above 80 percent. Ammonia nitrogen and phenol removal were above 90 and 80 percent respectively. The maximum biomass concentration within polyurethane foam was about 30 g/m2 in the first stage for 0.03 m3/m2/d hydraulic loading.The results show that t     

污水处理厂自动化监控系统

自动化技术在能源、电力、机械、环境等行业的应用越来越广泛，也促使了自动化水平的不断提高。由于Synall2000强大的网络化功能，为将来系统在子网级和企业级实施基于Synall2000网络化数据监控系统打下了坚实、可靠的基础。在全面实施单个站点自动化监控的基础上，可方便地实现子网级的网络化数据自动采集与监控系统。     

钢厂热锯机噪声控制方案

某钢厂热锯机的工作噪声问题严重影响附近居民的日常生活，急需解决。根据其发声机理，通过采取对圆盘锯边缘开槽，安装吸隔声罩，对锯片增加阻尼材料，夹紧工件等措施取得了较好的降噪效果。     

医院含病毒污水的安全处理技术

针对医院在治疗病毒疾病病人如非典型肺炎病人过程中排出的传染性病毒污水,分析了污水处理中消除细菌及病毒病原的消毒方法如氯气、二氧化氯、臭氧和紫外线消毒等的特点,结合医院含病毒污水的水质组成和处理过程无病毒扩散和二次污染的要求,分别从高级氧化技术、新型生物技术及其结合提出医院病毒污水安全处理发展的方向。     

基于服务式GIS的流域水质目标管理技术平台架构设计

针对流域水质目标管理与GIS集成技术,对比分析传统模式与服务式GIS模式的优劣,提出了基于服务式GIS的流域水质目标管理技术平台的层次结构、总体架构及建设步骤;基于具体建设需求分析,构建了辽河流域水质目标管理技术平台的详细架构。     

Research of the Response of Ecosystem to LUCC in Miyun County, Beijing： Based on Ecosystem Services Valuation

Miyun County,located in the northeast of Chinese capital Beijing,was underwent remarkable variations in land use in recent years.This paper aimed to detect changes in land use of Miyun from 1997 to 2005,and to qualify the response of ecosystem to LUCC based on ecosystem services valuation.With two-periods TM images,we got land use change data,and then ecosystem services values were calculated using ecosystem services valuation coefficients proposed by Chinese scholar Xie Gaodi.Results showed that water area,farm land and unused land decreased while residential land,forest land,grassland and orchard land increased during the study period.The loss of ESV was RMB 206 million and the main reason was the decrease of water area and farm land area.As for spatial variation,there were most dramatically land use change and ESV decline in reservoir ecological protection region.The coefficient sensitivity analysis indicates that valuation coefficients used in the study are suitable and results are reasonable.The driving forces of ESV loss were rapid population growth and economic development.More work should be done to make eco-environment stay healthy.     

CGE Simulation for Levying Carbon Tax in China and International Experience of Levying Carbon Tax

Levying carbon tax is conducive to reducing carbon dioxide emissions and protecting the environment.The author firstly reviewed some relevant empirical studies on carbon tax both home and abroad,and then established the CGE model and simulated levying carbon tax in China.The study found that levying carbon tax would have little impact on China’s economy:in a short-term,China’s GDP might decrease by 0.51%,while in a long-term it might decrease by 0.08%;however,the carbon dioxide emissions would be substantially reduced.Meanwhile,levying carbon tax has some negative impact on the output of each industry in the very economic structure;of this,the mineral extractive industries would be influenced the most.Then the author summarized experience of levying carbon tax in foreign countries.     

丁二烯过氧化物的生成、危害及安全性研究

综述了国内外丁二烯过氧化物研究进展，主要包括丁二烯过氧化物的危害性、成因、危险评价和热稳定性，并对今后的研究方向进行了展望。     

圆锥形零件冲压成形过程分析

通过分析圆锥形零件变形毛坯上不同部分在成形中的作用,揭示了该类零件的冲压成形特点,得出了悬空侧壁部分的变形状态是该类零件成形的关键,而径向拉应力是实现侧壁部分成形的必要条件,同时也是这部分冲压成形成败的关键。为此,经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式,为进一步研究提供了理论基础。