EuroBionet: a pan-European biomonitoring network for urban air quality assessment

EuroBionet, the 'European Network for the Assessment of Air Quality by the Use of Bioindicator Plants', is an EU-funded cooperative project currently consisting of public authorities and scientific institutes from 12 cities in 8 countries. In 2000, the bioindicator plants tobacco (Nicotiana tabacum Bel W3), poplar (Populus nigra 'Brandaris'), spiderwort (Tradescantia sp. clone 4430), Italian rye grass (Lolium multiflorum italicum) and curly kale (Brassica oleracea acephala) were exposed to ambient air at 90 monitoring sites according to standardised methods. Visible injuries and growth parameters were assessed and the accumulation of toxic substances in leaves determined. The exposure of tobacco resulted in a gradient with low levels of ozone-induced foliar injury in N and NW Europe, and medium to high values in the southern and central regions. The results of heavy metal and sulphur analyses in rye grass samples generally showed low to very low sulphur and low to medium heavy metal concentrations in leaves. In some cities, however, local hot spots of heavy metal contamination were detected. Analyses of the PAH contents in curly kale leaves gave low to medium values, with locally elevated levels at traffic-exposed sites.     

Comparative study of the suitability of three lichen species to trace-element air monitoring

To investigate the suitability of three lichen species (Cetraria islandica, Evernia prunastri, and Ramalina farinacea) as transplants to trace-element air biomonitoring, they were exposed on substratum-free supports, from July 1996 until July 1997, in three European countries with different climates (Germany, Italy, Romania), at six sites with different types of air pollutants (two in each country). After 2, 4, 6, and 12 months of exposure, some portions of thallus were collected, prepared, and measured by instrumental neutron activation analysis (INAA) at the Institute of Physics and Nuclear Engineering in Bucharest and by energy dispersive X-ray fluorescence analysis (EDXRFA) at the University of Hohenheim in Stuttgart. Fifteen environmentally relevant elements: As, Br, Ca, Co, Cr, Cu, Fe, K, Mn, Ni, Pb, S, Sb, V, and Zn were determined. The analytical results were compared statistically. To study the distribution of the trace-elements between the lichens and the lichen throughfall water inside a virtual column, the throughfall water was collected under the lichen transplants during 6 and 12 months. The dried residues were analysed by INAA at Bucharest. The accumulating capacity for all investigated species is evident. For a comparative evaluation, the initial element contents, the "accumulation factors" relative to the bulk deposition, the interspecies "calibration factors", and the "retention efficiencies", defined as ratios of the lichen enrichment to the sum of this enrichment and the content in the lichen throughfall water, were considered. These criteria attest the best suitability for Evernia prunastri, followed by Ramalina farinacea and Cetraria islandica.     

Transfer and effects of cadmium in an experimental food chain involving the snail Helix aspersa and the predatory carabid beetle Chrysocarabus splendens

The transfer and the toxic effects of Cd were studied in an experimental food chain involving the snail Helix aspersa as prey organism and one of its natural predators, the carabid beetle Chrysocarabus splendens. Juvenile snails were fed plant-based food enriched with 0, 10, 50 and 100 microg g(-1) of Cd, then were offered as prey to beetle larvae from egg hatching to pupation stage. Cd concentrations in snail tissues increased with increasing Cd concentration in food and with duration of exposure. Bioaccumulation factors ranged from 1.87 to 3.39, showing that H. aspersa snails, even in their early life stages, belong to macroconcentrator species for Cd. No significant reduction of snail consumption by beetles was found in exposed groups. Cd concentrations in beetle larvae remained very low (lower than 1 microg g(-1) for all groups), demonstrating a very effective regulation capacity in beetle larvae. However, Cd concentrations in highest exposed groups were higher than those found in control groups. Cd contents in adult beetles were lower than in larvae, showing a loss of Cd during metamorphosis. Despite the low Cd concentrations found in beetles, their exposure to Cd contaminated snails led to 31% of mortality, which occurred only during pupation and for the highest exposure level. No clear sublethal effects were found. These results showed that snails inhabiting heavily polluted areas may represent a risk of secondary poisoning for predatory invertebrates and provided quantitative data on the transfer of Cd between two compartments of a terrestrial food chain.     

Natural attenuation of chlorinated solvents at Area 6, Dover Air Force Base: groundwater biogeochemistry

Monitored natural attenuation (MNA) has recently emerged as a viable groundwater remediation technology in the United States. Area 6 at Dover Air Force Base (Dover, DE) was chosen as a test site to examine the potential for MNA of tetrachloroethene (PCE) and trichloroethene (TCE) in groundwater and aquifer sediments. A "lines of evidence" approach was used to document the occurrence of natural attenuation. Chlorinated hydrocarbon and biogeochemical data were used to develop a site-specific conceptual model where both anaerobic and aerobic biological processes are responsible for the destruction of PCE, TCE, and daughter metabolites. An examination of groundwater biogeochemical data showed a region of depleted dissolved oxygen with elevated dissolved methane and hydrogen concentrations. Reductive dechlorination likely dominated in the anaerobic portion of the aquifer where PCE and TCE levels were observed to decrease with a simultaneous increase in cis-1,2-dichloroethene (cis-DCE), vinyl chloride (VC), ethene, and dissolved chloride. Near the anaerobic/ aerobic interface, concentrations of cis-DCE and VC decreased to below detection limits, presumably due to aerobic biotransformation processes. Therefore, the contaminant and daughter product plumes present at the site appear to have been naturally atteuated by a combination of active anaerobic and aerobic biotransformation processes.     

Sequential anaerobic-aerobic treatment of an aquifer contaminated by halogenated organics: field results

In situ, sequential, anaerobic to aerobic treatment of groundwater removed perchloroethene (PCE, 1.1 microM) and benzene (0.8 microM) from a contaminated aquifer. Neither aerobic nor anaerobic treatment alone successfully degraded both the chlorinated and non-chlorinated organic contaminants in the aquifer. After the sequential treatment, PCE, trichloroethene (TCE), vinyl chloride (VC), chloroethane (CA), and benzene were not detectable in groundwater. Desorption of residual aquifer contaminants was tested by halting the groundwater recirculation and analyzing the groundwater after 3 and 7 weeks. No desorption of the chlorinated contaminants or daughter products was observed in the treated portion of the aquifer. Sequential anaerobic to aerobic treatment was successful in remediating the groundwater at this test site and may have broad applications at other contaminated sites. Over the 4-year course of the project, the predominant microbial environment of the test site varied from aerobic to sulfate-reducing, to methanogenic, and back to aerobic conditions. Metabolically active microbial populations developed under all conditions, demonstrating the diversity and robustness of natural microbial flora in the aquifer.     

Metal accumulation in aquatic macrophytes from southeast Queensland,Australia

To determine the extent of metal accumulation in some aquatic macrophytes from contaminated urban streams in southeast Queensland, plants were sampled from six sites, along with contiguous sediments. In all, 15 different species were collected, the most common genera being Typha (Cattails or Bulrushes) and Persicaria (Knotweeds). Before heavy metal analysis, plants were further separated into various morphological tissues, and five selected samples were separated into various physiological tissues. The cadmium, copper, lead and zinc content of the plants were analysed using flames AAS. In general, plant roots exhibited higher metal concentrations than the contiguous sediments. Of the metals of interest, only for zinc was there a relatively clear pattern of increasing accumulation in aquatic macrophytes with increasing sediment metal concentrations. Comparison between morphological tissues of the sampled plants found that roots consistently presented higher metal concentrations than either the stems or leaves, however unlike previous studies, this investigation revealed no consistent trend of stems accumulating more metals than the leaves. For Typha spp., metal concentrations followed the order of roots > rhizomes > leaves, while for Persicaria spp. the order was roots > leaves > stems. The submerged species Myriophyllum aquaticum accumulated the highest levels of metals overall (e.g. Zn 4300 micrograms g-1 dry weight and Cd 6.5 micrograms g-1), and the emergent macrophytes also exhibited relatively high metal contents in their roots. The leaves of the submerged and floating-leafed species collected contained relatively high quantities of the four metals of interest, compared with the leaves of emergent aquatic macrophytes. In the Typha rhizome and Persicaria stem samples analysed for internal variation in metal content, there was a pattern of increasing metal concentrations towards the external sections of the stem, both for subterranean stems (rhizomes) and above-substrate stems. For Persicaria stems, no clear pattern was observed for cadmium and lead, the two metals investigated that are not required by plants for survival.     

Study of chlorothalonil photodegradation in natural waters and in the presence of humic substances

Photodegradation of chlorothalonil was studied in different natural waters (sea, river and lake) as well as in distilled water under natural and simulated solar irradiation. The effect of dissolved organic matter (DOM) such as humic and fulvic substances on the photodegradation rate of chlorothalonil was also studied in simulated sunlight. The presence of DOM enhanced the photodegradation of chlorothalonil with the exception of seawater. The kinetics were determined through gas chromatography electron capture detection (GC/ECD) and the photodegradation proceeds via pseudo-first-order reaction in all cases. Half-life ranged from 1 to 48 h. In natural and humic water chlorothalonil photodegradation gave rise to two different intermediates compared to distilled water demonstrating that the transformation of chlorothalonil depend on the constitution of the irradiated media and especially from DOM. The byproducts identified by GC/MS techniques were: chloro-1,3-dicyanobenzene, dichloro-1,3-dicyanobenzene, trichloro-1,3-dicyanobenzene and benzamide.     

Performance assessment of NAPL remediation in heterogeneous alluvium

Over the last few years, more than 40 partitioning interwell tracer tests (PITTs) have been conducted at many different sites to measure nonaqueous phase liquid (NAPL) saturations in the subsurface. While the main goal of these PITTs was to estimate the NAPL volume in the subsurface, some were specifically conducted to assess the performance of remedial actions involving NAPL removal. In this paper, we present a quantitative approach to assess the performance of remedial actions to recover NAPL that can be used to assess any NAPL removal technology. It combines the use of PITTs (to estimate the NAPL volume in the swept pore volume between injection and extraction wells of a test area) with the use of several cores to determine the vertical NAPL distribution in the subsurface. We illustrate the effectiveness of such an approach by assessing the performance of a surfactant/foam flood conducted at Hill Air Force Base, UT, to remove a TCE-rich NAPL from alluvium with permeability contrasts as high as one order of magnitude. In addition, we compare the NAPL volumes determined by the PITTs with volumes estimated through geostatistical interpolation of aquifer sediment core data collected with a vertical frequency of 5-10 cm and a lateral borehole spacing of 0.15 m. We demonstrate the use of several innovations including the explicit estimation of not only the errors associated with NAPL volumes and saturations derived from PITTs but also the heterogeneity of the aquifer sediments based upon permeability estimates. Most importantly, we demonstrate the reliability of the     

Preliminary background ozone concentrations in the mountain and coastal areas of Bulgaria

Urban and non-urban rural ozone (O3) concentrations are high in Bulgaria and often exceed the European AOT40 ecosystem as well as the AOT60 human health standards. This paper presents preliminary estimates to establish background, non-urban O3 concentrations for the southern region of Bulgaria. Ozone concentrations from three distinctly different sites are presented: a mountain site influenced by mountain-valley wind flow; a coastal site influenced by sea-breeze wind flow; and a 1700-m mountain peak site without 'local' wind flow characteristics. The latter offers the best estimate of 46-50 ppb for a background O3 level. The highest non-urban hourly value, 118 ppb, was measured at the mountain-valley site.     

Spatial characteristics of fine particulate matter: identifying representative monitoring locations in Seattle, Washington

This study investigates how PM2.5 varies spatially and how these spatial characteristics can be used to identify potential monitoring sites that are most representative of the overall ambient exposures to PM2.5 among susceptible populations in the Seattle, WA, area. Data collected at outdoor sites at the homes of participants of a large exposure assessment study were used in this study. Harvard impactors (HIs) were used at 40 outdoor sites throughout the Seattle metropolitan area. Up to six sites at a time were monitored for 10 consecutive 24-hr average periods. A fixed-effect analysis of variance (ANOVA) model that included date and location effects was used to analyze the spatial variability of outdoor PM2.5 concentrations. Both date and location effects were shown to be highly significant, explaining 92% of the variability in outdoor PM2.5 measurements. The day-to-day variability was 10 times higher than the spatial variability between sites. The site mean square was more than twice the error mean square, showing that differences between sites, while modest, are potentially an important contribution to measurement error. Variances of the model residuals and site effects were examined against spatial characteristics of the monitoring sites. The spatial characteristics included elevation, distance from arterials, and distance from major PM2.5 point sources. Results showed that the most representative PM2.5 sites were located at elevations of 80-120 m above sea level, and at distances of 100-300 m from the nearest arterial road. Location relative to industrial PM2.5 sources is not a significant predictor of residential outdoor PM2.5 measurements. Additionally, for sites to be representative of the average population exposures to PM2.5 among those highly susceptible to the health effects of PM2.5, areas of high elderly population density were considered. These representative spatial characteristics were used as multiple, overlapping criteria in a Geographic Information System (GIS) analysis to determine where the most representative sites are located.