Increasing the application of gas engines to decrease China’s GHG emissions

This paper employs a review of the technical literature to estimate the potential decrease in greenhouse gas (GHG) emissions that could be achieved by increasing the application of gas engines in China in three sectors: urban public transport vehicle; shipping; and thermal power plants. China’s gas engine development strategies and three types of gas resource are discussed in the study, which indicates that gas engines could decrease GHG emissions by 520 megatonnes (Mt) of carbon dioxide equivalent (CO_2e) by 2020. This would account for 9.7 % of the government’s target for decreasing GHG emissions and is dominated by methane recovery from the use of coal mine gas (CMG) and landfill gas (LFG) for power generation. In the public urban transport vehicle and shipping sectors the low price of natural gas and the increasing demand for the control of harmful emissions could spur the rapid uptake of gas engine vehicles. However, the development of CMG- and LFG-fuelled power plants has been limited by the unwillingness of local enterprises to invest in high-performance gas engine generators and the associated infrastructure. Therefore, further compulsory policies that promote CMG use and LFG recovery should be implemented. Moreover, strict regulations on limiting methane leakage during the production and distribution of gas fuels are urgently needed in China to prevent leakage causing GHG emissions and largely negating the climate benefits of fuel substitution. Strategies for increasing the application of gas engines, promoting gas resources and recovering methane in China are instrumental in global GHG mitigation strategies.     

FMEA和HAZOP在煤气柜风险分析中的综合应用

将故障类型和影响分析(FMEA)和危险和可操作性研究(HAZOP)相结合,对某电石生产企业的煤气柜设备和其涉及到的工艺的风险性进行了系统安全分析,并根据分析结果提出了针对性的控制措施。这两种分析方法各有所长,从不同角度系统全面地分析了潜在风险中的不安全因素,使其分析结果更加可靠、实用。     

双层内衬改造技术在埋地油罐中的应用研究

介绍了共结构双层内衬改造技术,其结构共由5层组成,分别为基础层(防腐层和加强密封层组成)、中空监测层、内衬加强层、防油防腐层和导静电层;采用该技术可对加油站埋地单层钢制油罐进行双层改造,经过罐内清洗、喷砂除锈、基础层施工、中空监测层施工、内衬加强层施工、防油防腐层施工、导静电层施工和整个系统气密性的保压检测,完成双层内衬油罐的现场改造;采用GB30040规定的Ⅰ级真空泄漏监测方法,可以在油品泄漏前报警,实现埋地油罐整体安全水平的提升,具有重要的现实意义。     

湖北省PM2.5与PM10比值分析及PM2.5时空分布特征研究

基于2012年-2014年湖北省大气污染物监测数据,通过数据反演方法,得到湖北省17个城市的PM2.5年均浓度.利用ArcGIS绘制出各城市不同年份的颗粒物浓度空间分布图,并对其进行分析.结果表明,2012年-2014年间,湖北省17个城市PM2.5与PM10年均浓度比值为0.66,PM2.5年均浓度超出国家二级标准,整体呈现上升趋势.城市方面,在多数城市PM2.5与PM10浓度上升的同时,仅武汉、黄冈和天门3个城市颗粒物浓度2014年较2013年有所下降,且武汉市PM2.5浓度下降率达12.8%,表明武汉市近两年来采取的政策措施具有较好的可行性和有效性.     

罕见冬季降雨中人工增雨微物理过程分析研究

用Micaps实时资料、CPAS卫星反演分析资料、NCEP再分析资料、ECMWF再分析资料,多普勒雷达PUP产品资料,对2015年12月1日夜间至2日凌晨沈阳地区罕见冬季降雨过程,进行了天气学分析、及大气微物理人工增雨作业条件分析,并结合沈阳地区人工增雨作业指标,得出本次降雨过程在厄尔尼诺正在发生的背景下,为常见的高空槽转东北冷涡型,水汽、动力等微物理作业条件也适合于开展人工增雨作业,并给出了相应的作业指导参数,为沈阳地区今后在冬季降雨天气过程中开展人工增雨作业积累了宝贵经验.     

省级生态保护红线划定实践研究 ——以青岛市为例

在省级及以上禁止开发区、重点生态功能保护区等进行调查分析的基础上,以青岛市为实践区域,与多类规划衔接,划定青岛市省级生态保护红线.青岛市最终划定59处省级生态保护红线区,面积合计1120.65 km2,占国土面积的9.9%.划定的生态保护红线符合确立"三生"空间和落实"多规合一"的要求,有利于改善生态系统服务功能,保障人居环境安全,增强经济社会可持续发展能力,对于青岛市市级生态保护红线的划定和生态安全格局的构建具有非常重要的意义.     

基于GIS和RS的市域尺度下的植被NPP研究

在GIS和RS支持下,利用土地利用类型数据、地面气象数据和遥感影像数据,以青岛市为例,研究了市域尺度下的植被NPP空间分布特征.结果表明:青岛市NPP值为0~288 g·m-2·a-2,林地NPP值较高,耕地次之,建成区等区域最小.在小尺度区域内,NPP分布受土地利用类型影响较大,受气象因素影响较小.NPP模块在数据获取上比较容易,仅利用土地利用类型数据、地面气象数据和遥感数据就可以对陆地植被NPP进行计算,实际应用可操作性强.30 m分辨率植被NPP计算值更适宜于在市级小尺度区域内应用.     

SCREEN3模型在大气环境管理中的应用研究

基于高斯扩散的单源估算模式SCREEN3计算佛山市环境统计企业的SO2排放最大落地浓度距离,发现全市工业企业SO2排放最大落地浓度距离为0.4~13.5 km.其中水泥和火电等高架源的最大落地浓度的距离最远.佛山市及五区纳入环境统计的重点废气排放企业平均的SO2排放最大落地浓度距离为2.9~4.9 km,能直接影响国控监测点位的企业合计37家,其中40%为高明区的企业.该结果证明加强空气质量国控监测点位周边至少5 km内废气排放企业的督查有利于空气质量的改善.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.