Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

Practical considerations for addressing uncertainties in monitoring bulk deposition

The assessment of the deposition of both wet (rain and cloud) and dry sedimenting particles is a prerequisite for estimating element fluxes in ecosystem research. Many nations and institutions operate deposition networks using different types of sampler. However, these samplers have rarely been characterized with respect to their sink properties. Major errors in assessing bulk deposition can result from poor sampling properties and defective sampling strategies. Relevant properties are: sampler geometry and material, in particular the shape of the rim; sink properties for gases and aerosols; and microbial transformations of the collected samples. An adequate number of replicates allows the identification of samples which are contaminated, in particular by bird droppings. The paper discusses physical and chemical properties of the samplers themselves. The dependence of measurement accuracy on the number of replicates and the sampling area exposed is discussed. Recommendations are given for sampling strategies, and for making corrections and substitution of missing data.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, -thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².

The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, α-thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

The Adaptive Capacity Wheel: a method to assess the inherent characteristics of institutions to enable the adaptive capacity of society

Climate change potentially brings continuous and unpredictable changes in weather patterns. Consequently, it calls for institutions that promote the adaptive capacity of society and allow society to modify its institutions at a rate commensurate with the rate of environmental change. Institutions, traditionally conservative and reactive, will now have to support social actors to proactively respond through planned processes and deliberate steps, but also through cherishing and encouraging spontaneous and autonomous change, as well as allowing for institutional redesign. This paper addresses the question: How can the inherent characteristics of institutions to stimulate the capacity of society to adapt to climate change from local through to national level be assessed? On the basis of a literature review and several brainstorm sessions, this paper presents six dimensions: Variety, learning capacity, room for autonomous change, leadership, availability of resources and fair governance. These dimensions and their 22 criteria form the Adaptive Capacity Wheel. This wheel can help academics and social actors to assess if institutions stimulate the adaptive capacity of society to respond to climate change; and to focus on whether and how institutions need to be redesigned. This paper also briefly demonstrates the application of this Adaptive Capacity Wheel to different institutions.     

Making index insurance attractive to farmers

There are several factors that influence whether people will want to participate in index insurance programs. A number of these influence their attractiveness on economic grounds, including both the size and timing of the premium and potential payouts, and the degree of risk aversion of the potential customers. Other factors make programs attractive for reasons that are not economic, but no less valid. These have to do with the trust that people have in the insurance product and the organizations involved in selling and managing it. Indeed, data from India, Africa, and South America show that these factors may be more important than the economic ones in influencing demand. Index insurance pilot projects, in order to estimate demand for alternative products, have typically involved a great deal of interaction with potential customers. It is important to recognize that such interaction is crucial not just as a research tool, but also as a means to build understanding and trust in the products. When scaling up from isolated pilots to operational programs, it is vital to recognize this trust building function by replicating participation efforts in every community. In this paper, we examine the role of field games in establishing and building trust in three important aspects of these projects for participants: trust in the insurance product, trust in the participating organizations, and trust in their own ability to make good decisions. While games have previously been used as a way to gauge interest in the product and to identify design features, we argue that these games are also valuable tools for constructing these kinds of trust.