Electron microscopy study of biosorbents from marine macro alga Durvillaea potatorum

Biosorbents derived from the biomass of marine algae have shown to have high uptake capacities for heavy metals and the internal structure has been generally assumed to be pseudo-homogenous. In this paper, the microstructures of biosorbents derived from Australian marine alga Durvillaea poratorum were analysed using scanning electron microscopy. The structural components of the biosorbent resembled fiber-like cylinders. The internal structure was a highly connected network of cylinders with varying sizes. Methods of drying and pre-treatment of the biomass also affected the details of the internal structure. Calcium chloride followed by thermal treatment provided the most uniform cylinder networks for the biosorbents. Heavy metal Cu2+ and Cd2+ binding in the biomass was confirmed by using an electron probe microanalyser.     

Priority volatile organic compounds in surface waters of the southern North Sea

The occurrence of 25 volatile organic compounds (VOCs) was studied from April 1998 to October 2000 in the southern North Sea. Target VOCs were selected from lists of priority pollutants for the marine environment and included, e.g., chlorinated short-chain hydrocarbons (CHCs), monocyclic aromatic hydrocarbons (MAHs), and chlorinated monocyclic aromatic hydrocarbons (CMAHs). Water samples were taken from the Channel, the Belgian Continental Shelf, the mouth of the Scheldt estuary and the Southern Bight, and were analysed by purge-and-trap and high-resolution gas chromatography-mass spectrometry. All data were produced by analyses deemed 'in control' by a rigorous quality assurance/quality control program provided by QUASIMEME (Quality Assurance of Information for Marine Environmental Monitoring in Europe). Chloroform and trichloroethene were commonly detected at concentrations up to 1900 and 270 ng l(-1), respectively. The other CHCs were generally found below 5 ng l(-1), and rarely exceeded 10 ng l(-1). Concentrations of MAHs were at least one order of magnitude higher than those of the CHCs. The higher levels were attributed to anthropogenic emissions from oil-related activities in coastal areas. CMAHs, except chlorobenzene and 1,4-dichlorobenzene, were hardly detected in North Sea waters. The levels of several CHCs and MAHs were shown to decrease compared to previous investigations in 1994-1995, probably as a result of on-going emission reduction efforts. The occurrence of 1,1,1-trichloroethane, for instance, was substantially reduced since the Montreal Protocol was implemented in 1995.     

Removal of pollutants from surface water and groundwater by nanofiltration: overview of possible applications in the drinking water industry

During the last decade, nanofiltration (NF) made a breakthrough in drinking water production for the removal of pollutants. The combination of new standards for drinking water quality and the steady improvement of the nanofiltration process have led to new insights, possible applications and new projects on lab-scale, pilot scale and industrial scale. This paper offers an overview of the applications in the drinking water industry that have already been realised or that are suggested on the basis of lab-scale research. Applications can be found in the treatment of surface water as well as groundwater. The possibility of using NF for the removal of hardness, natural organic material (NOM), micropollutants such as pesticides and VOCs, viruses and bacteria, salinity, nitrates, and arsenic will be discussed. Some of these applications have proven to be reliable and can be considered as known techniques; other applications are still studied on laboratory scale. Modelling is difficult due to effects of fouling and interaction between different components. The current insight in the separation mechanisms will be briefly discussed.     

Base-cation deposition in Europe—part II. Acid neutralization capacity and contribution to forest nutrition

An assessment was made of the capacity of base cations to neutralize acid deposition and of the contribution of base cation deposition to forest nutrition in Europe. In large parts of southern Europe more than 50% of the potential acid deposition was found counteracted by deposition of non-sea salt Mg²⁺ + Ca²⁺ + K⁺. In central and northwestern Europe, base cation deposition usually amounted to less than 25% of the acid input. Smallest base cation deposition relative to potential acid deposition was found in southern Scandinavia, Denmark, northern Germany and The Netherlands. A similar spatial pattern was found for the neutralization of acid anions in precipitation. Whereas in Scandinavia weathering is the dominant supplier of base cation to forest soils, in eastern and southern Europe, forests mainly rely on atmospheric deposition for the supply of base cations. Using error propagation, the random and systematic error in acid neutralization capacity for an average grid cell of 10 × 20 km was estimated to equal 45–55% and 50–55%, respectively.     

Persistent organochlorine pollutants in human serum of 50-65 years old women in the Flanders Environmental and Health Study (FLEHS). Part 1: Concentrations and regional differences

In 1999, a campaign of the Flemish Ministry of Health, Belgium was set up to assess pollutant concentrations and related health effect biomarkers in humans living in two regions of Flanders. The study was called the 'Flemish Environment and Health Study' (FLEHS). One of the goals was to measure present concentrations of persistent organochlorine pollutants in a Flemish population and to compare values obtained from pooled and individual serum samples. Concentrations of selected organochlorine pesticides, polychlorinated biphenyls (PCB) and polychlorinated dibenzo-p-dioxins (PCDD) and furans (PCDF) were measured by gas chromatography-mass spectrometry. TEQ values were also assessed by Chemical-Activated LUciferase gene eXpression (CALUX) bioassay. The study population consisted of 200 women between 50 and 65 years living in two areas of Flanders, Belgium. Because of the large volumes serum needed for all measurements, the concentrations of organochlorines were measured in 47 pooled serum samples originating from these women. The concentrations of the indicator PCBs (359.8 ng/g fat) and organochlorine pesticides (hexachlorobenzene, p,p'-dichlorodiphenyldichloroethylene, p,p'-dichlorodiphenyl-trichloroethane, lindane and pentachlorophenol), were comparable to those found in other European countries. The concentrations of PCDD/PCDFs showed another picture. With a median value of 48 pg WHO-TEQ/g fat, the women had 2-fold higher levels than a comparable age group from Germany examined in 1996. The mean total WHO-TEQ including PCDD/F, non-ortho and mono-ortho PCBs was 72.7 pg WHO-TEQ/g fat, whereas the CALUX-TEQ mean value was only 35.0 pg TEQ/g fat. In order to assess the pooling procedure, indicator PCBs and CALUX-TEQs were measured in all 200 individuals that were integrated in the pools. The measured values were comparable to the pool results: 390.0 ng/g fat and 41.6 pg TEQ/g fat respectively. It was concluded that pooling of serum samples offers the possibility to measure exposure in the whole study population on a more cost-effective way. However, because of statistical power loss and no possibility of confounder adjustment, pooling is not the most effective way to study regional differences.     

Environmental impact of two successive chemical treatments in a small shallow eutrophied lake: Part II. Case of copper sulfate

The appearance of cyanobacteria ( > 10 colony per ml) was not prevented after alum treatment. In order to prevent cyanobacteria efflorescences in a small shallow polymictic lake (Courtille, France), copper sulfate was applied. Treatment level was 63 microg 1(-1) as Cu2+ from CUSO4, 5 H2O. Cyanobacteria were kept under control during the summer. Microcystis sp. completely disappeared, which allowed swimming in the lake throughout the tourist season. Microcystis only reappeared 2 months after the treatment. Copper content in the water column only returned to its background level 2 months after copper addition. This high residence time of copper in the water might have been caused by complexation and adsorption of copper on natural organic matter, whose level was high in the ecosystem studied. A mechanism of transfer of 'truly' dissolved copper towards particulate copper has been underlined and explains the disappearance of this fraction of copper in the water column.     

Kin discrimination in the spotted hyena (<Emphasis Type="Italic">Crocuta crocuta</Emphasis>): nepotism among siblings

We examined patterns of affiliation, association, and aggression to inquire whether spotted hyenas (Crocuta crocuta) can distinguish among various groups of maternal and paternal siblings. If so, and if these animals conform to predictions of kin selection theory, then behavioral interactions among hyenas should vary with relatedness. We also considered familiarity-based recognition and phenotype matching as mechanisms hyenas might use to recognize kin. Patterns of affiliative behavior indicated that hyenas favored full-sibling littermates over half-sibling littermates or any other group of half-siblings. Rates of dyadic aggression generally did not vary with kinship. Hyenas associated more closely with half-sibling littermates than with non-littermate half-siblings, and hyenas affiliated more with maternal half-siblings than with paternal half-siblings, suggesting that familiarity-based cues might mediate discrimination among these sibling classes. In addition, operation of a phenotype-matching mechanism was suggested by the preference hyenas demonstrated during affiliative interactions for full- over half-sibling littermates, and by their lack of preference in these interactions for half-sibling littermates over non-littermate half-siblings. Phenotype matching was also suggested by our observation that paternal half-siblings cooperated more, and fought less, than did non-kin. Our data indicate that hyenas can discriminate among various types of siblings, that their social behavior conforms to predictions of kin selection theory, and that they recognize kin using mechanisms of both familiarity and phenotype matching.Communicated by S. Alberts     

The cost of mating with a non-virgin male in a monandrous butterfly: experimental evidence from the speckled wood, Pararge aegeria

Contrary to vertebrates, sperm production in insects may bear considerable costs for males. This is especially true in species that donate spermatophores containing sperm and nutrient-rich accessory gland products like in butterflies. Hence, spermatophores at first and subsequent copulations can differ in a quantitative and qualitative way. Such effects have particularly been shown in polyandrous species providing large spermatophores. Here we experimentally tested the effect of male mating status (virgin male vs recently mated male) on copulation duration, spermatophore size and females’ fitness components in a monandrous butterfly Pararge aegeria that typically donates small spermatophores. Copulations with non-virgin males lasted on average five times longer than that with virgin males and resulted in a spermatophore which was on average three times smaller. Number of eggs laid and female life span were not affected by the mating status treatment, but there was a significant effect on the number of living caterpillars a female produced, as copulations with virgin males resulted in higher numbers of larval offspring. Interestingly, the difference in spermatophore mass at the first and the second copulation increased with male body size. This suggests differential spermatophore allocation decisions among males of different size. Consequences for females and potential mechanisms influencing female fitness components are discussed. Given the small absolute size of spermatophores in P. aegeria, components other than consumable nutrients (perhaps hormones) should cause the observed effects.